The MGA With An Attitude
MGAguru.com MGAguru.com
CARBURETORS and EXHAUST TECH

CB-101 - CARBURETORS You May Find on the MGA.
CB-102 - CHOKE ADJUSTMENT (and fast idle)
CB-103 - COLD WEATHER STARTING
  MG-258 - Carburetor Icing, 18Jun59 (csm)
  MG-355 - Carburetor Icing, 09Mar61 (csm)
CB-104 - VAPOR LOCK and Hot Air Flow
CB-105 - Change of CARBURETOR DAMPER
  MG-264 - Carburetor Damper Piston (csm)
  MG-213 - Change of Carburetor DISTANCE PIECE & GASKET (csm)
CB-105A - "DUSTLESS" CARBURETORS
MGA SU carburetors
CB-106 - Fixing DRIPPY SU H-type CARBURETORS
CB-107 - BROKEN THROTTLE CABLE
CB-108 - DRAGGING CHOKE CABLE
CB-109 - FUEL VENT-OVERFLOW PIPES Installation
CB-109A - FUEL VENT-OVERFLOW PIPES Repair
CB-110 - STICKY THROTTLE and Worn Throttle Shafts
CB-111 - NO FUEL FEED - Engine Does Not Run
CB-111A - BANJO BOLT For Float Chamber, Change of Design
CB-112 - GROSE-JETS
CB-113 - Driving With Only ONE CARBURETOR
CB-114 - Accelerator PEDAL POSITION
CB-114A - Accelerator PEDAL POSITION, Part 2
CB-114S - Accelerator PEDAL SHAFT Change Of Design - LHD
CB-116 - FUEL OVERFLOW from your SU Carburetors
CB-116A - FUEL OVERFLOW, SU H-Type Carburetors #2
CB-116B - FUEL OVERFLOW, SU H-Type Carburetors #3
CB-117 - SYNCHRONIZING Air Flow and ADJUSTING MIXTURE
CB-118 - Throttle Return Springs
  MG-202 - Accelerator PEDAL RETURN SPRING Added
- (csm)
  AHH5623 - Accelerator Spring Bracket
- (pdf)
  AHH5626 - Accelerator Spring Trunnion
- (pdf)
CB-119 - RUNNING RICH, Cannot Adjust To Lean

CB-120 - NEEDLE PROFILE for SU Carburetors
CB-121 - os - SU NEEDLE Profile Comparison
CB-122 - os - SU NEEDLE Numbers Tabulation
CB-123 - SU NEEDLE Cross Reference to BECK ARNLEY Numbers
  BA-SU_Cross - SU NEEDLE Cross Reference to BECK ARNLEY Numbers
(pdf)
CB-125 - COLORTUNE (Gunson) Instructions (133-KB pdf file)
CB-130 - S.U. Carburetor TOOL KIT Instructions
CB-135 - UNI-SYN Carburetor Balancing Tool
CB-140 - SCREENS for the Air Cleaners

os video - Centering the Jet - University Motors, Ltd.
os video - Matching SU Air Pistons - University Motors, Ltd.
os video - Secrets of the SU Carburetter, Part 1 of 2 - University Motors, Ltd.
os video - Secrets of the SU Carburetter, Part 2 of 2 - University Motors, Ltd.
os video - SU H-Type Carburetters - University Motors, Ltd.
os video - SU H4 Carburetter Threads (MGA) - University Motors, Ltd.

CB-200 - Substitute AIR FILTERS for MGA
CB-201 - Installing K&N AIR FILTERS on your MGA
CB-201A - Cleaning and Oiling K&N AIR FILTERS
CB-202 - INTAKE-EXHAUST HEAT SHIELD
CB-202B - INTAKE-EXHAUST HEAT SHIELD Drawings
CB-203 - CARBURETOR HEAT SHIELD (1)
CB-204 - CARBURETOR HEAT SHIELD (2)
CB-204A - CARBURETOR HEAT SHIELD (2) REPORT
CB-205 - CARBURETOR HEAT SHIELD (3)
CB-206 - CARBURETOR HEAT SHIELD (4)
CB-207 - BILGE BLOWER To Cool Carburetors
CB-208 - BILGE BLOWER To Cool Carburetors, 4-inch
CB-208A - BILGE BLOWER To Cool Supercharger, 3-inch #1
CB-208B - BILGE BLOWER To Cool Carburetors, 3-inch, #2
CB-208C - BILGE BLOWER To Cool Carburetors, 3-inch, #3
CB-208D - BILGE BLOWER To Cool Carburetors, 3-inch, #4
CB-208E - BILGE BLOWER To Cool Carburetors, 3-inch, #5
CB-209 - BILGE BLOWER, 4-inch Double Duty
CB-210 - Carburetor REBUILD - DIAGNOSTICS and a Short Cut
CB-210A - Carburetor REBUILD - Inspecting throttle body for wear
CB-210B - Carburetor REBUILD - Installing OVERSIZE Throttle Shafts
CB-210C - Carburetor REBUILD - Installing BUSHINGS in the Throttle Body
CB-210D - Carburetor REBUILD - DRILLING for Throttle Arm Pin
CB-210E - Carburetor REBUILD - WORN THROTTLE ARM, Restoring
CB-212 - Throttle Cable Support Bracket #1

PP-104 - VELOCITY STACKS #1 (See Engine - Power)
PP-104A - VELOCITY STACKS #2 (See Engine - Power)
PP-104B - VELOCITY STACKS #3 (See Engine - Power)
PP-104C - VELOCITY STACKS #4 (See Engine - Power)
PP-104D - VELOCITY STACKS #5 (See Engine - Power)
PP-104E - VELOCITY STACKS #6 (See Engine - Power)
PP-104R - VELOCITY STACKS, Rimmer Bros (See Engine - Power)

CB-300 - FUEL BOWL SPACERS
CB-301 - COLD AIR INTAKE BOX
CB-302 - AIR CLEANER for Cold Air Intake
CB-303 - COLD AIR INTAKE Assembly
CB-304 - FUEL RECIRCULATION For Carburetor Cooling
CB-308 - WEBER Carburetor DGV Installation
CB-310 - WEBER Carburetor MOD for Anti-Run-On and Vapor Recovery

EX-101 - EXHAUST SYSTEM, General Information
EX-102 - STAINLESS STEEL EXHAUST, Not Forever?
EX-103 - REPACKING a Muffler
EX-104 - FLOORBOARD FIRE from Exhaust System
EX-105 - MUFFLER (Silencer) REPLACEMENT
EX-106 - HOW Is It HANGING?
EX-107 - EXHAUST SEAL (Donut)
EX-107A - EXHAUST Manifold Gasket
EX-108 - EXHAUST MANIFOLD Shrinkage And Cracks

EX-201 - BROKEN EXHAUST MANIFOLD, Welding #1
EX-201A - BROKEN EXHAUST MANIFOLD, Welding #2
EX-202 - TUBULAR HEADERS and BIG BORE EXHAUST
EX-203 - EXHAUST HEAT SHIELDS
EX-203A - EXHAUST/FLOOR HEAT SHIELD Drawing -
(75-KB pdf)
EX-204 - MGB Exhaust Manifold on MGA
EX-204A - MGB Exhaust Manifold on MGA 2

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2000-2017 Barney Gaylord -- Copyright and reprint information