PART NO. SPL.PAGE DESCRIPTION
LWN105 15.A.7 Washer for stud (spring) -petrol pump cover
LWN107 15.H.2 Washer (spring) (4) (for differential carrier studs)
LWN204 15.A.7 Washer for screw (spring) -front cover (5)
LWN204 15.A.6 Washer for screw (spring) -blanking plate (before (E) GD101)
LWN204 15.A.8 Washer for screw (spring) (oil pump)
LWN204 15.A.8 Washer for screw -strainer [Fin(E)GB46044 except 46101-46342]
LWN204 15.B.1 Washer for screw (spring) (2) -(housing to distributor, ignition,
1500)
LWN204 15.B.1 Washer for clamp bolts (spring) (3) -(coil mount, ignition, 1500)
LWN204 15.F.2 Washer for set screw (spring) (6) (gearbox extension top cover) -
Change to LWZ304 Com.(E)GD101
LWN204 15.F.2 Washer for block (spring) (2) (shift rod guide block) -
Change to LWZ304 Com.(E)GD101
LWN204 sup.8 Washer -spring -screw (3) -(cover to front plate, engine unit, sup)
LWN204 sup.8 Washer -spring -screw (2) -(front cover to bearing cap,eng.unit, sup)
LWN204 sup.9 Washer -spring -screw (2) -(oil pump, engine unit, sup)
LWN204 16.A.7 Washer -spring -screw (3) -(front cover to mtg plate, eng.unit, 1600)
LWN204 16.A.7 Washer -spring -screw (2) -(front cover to bearing cap,eng.unit, 1600)
LWN204 16.A.8 Washer -spring -screw (2) -(oil pump cover, engine unit, 1600)
LWN204 16.A.28 Washer -spring -screw (3) -(front cover to front plate, engine unit,
1600)
LWN204 16.A.28 Washer -spring -screw (2) -(front cover to bearing cap, engine unit,
1622)
LWN204 16.B.2 Washer -spring -screw (2) -(distributor to housing, engine unit, 1600)
LWN204 16.F.5 Washer -spring -screw (2) -(selector levers, gbx, 1600 ans 1600-MK-II)
LWN204 TC.A.6 Washer for screw (spring) (3) -(half speed shaft, engine, Twin Cam)
LWN204 TC.A.6 Washer for screw (spring) (2) -(front.eng.plate to brg cap, engine,
Twin Cam)
LWN204 TC.A.9 Washer for screw (spring) -(bracket to crankcase, tensioner, camshaft,
engine, Twin Cam)
LWN204 TC.A.13 Washer for screw (spring) (2) -(oil.pump.cover, oil.pump, engine, Twin
Cam)
LWN204 16.F.1 Washer for screw (spring) (6) -(top cover,gearbox assy, Twin Cam)
LWN204 TC.F.2 Washer for screw (spring) (2) -(shaft locating block, gearbox
assembly, Twin Cam)
LWN205 15.A.7 Washer (spring) for Screw -cover to crankcase (4)
LWN205 sup.1 Washer -spring -blanking plate stud (2) -(fuel pump, block assy,
engine unit, sup)
LWN205 sup.8 Washer -spring -screw (4) -(front cover to crankcase, eng.unit, sup)
LWN205 16.A.7 Washer -spring -screw (4) -(front cover to crankcase, eng.unit, 1600)
LWN205 16.A.28 Washer -spring -for screw (4) -(front cover to crankcase, engine unit,
16ooand 1600-MK-II)
LWN205 16.J.2 Washer -spring -nut (2) -(U-joint, steering, 1600 and 1600-MK-II) -was
LWN205 (must be a mistake)
LWN206 15.A.12 Washer for nut (spring) -(pillar to plate, dynamo mounting, 1500)-
changed to LWN306 Com.(E)GD101
LWN206 15.A.12 Washer (spring) for dynamo mounting link to pillar
LWN206 15.N.2 Washer for screw (spring) (2) (bolts, starter to mounting plate)
LWN206 16.N.2 Washer -spring -screw (2) -(fixing, starter, 1600 and 1600-MK-II)
LWN206 TC.A.11 Washer for stud (spring) (12) -(camshaft bearing, chwvga, cyl.head,
engine, Twin Cam)
LWN208 15.A.1 Washer (spring) main bearing cap stud
LWN208 15.L.1 Washer for nut (spring) -(rear shock link)
LWN208 sup.1 Washer -spring -stud (6) -(main bearing cap, cyl.block, eng.unit, sup)
LWN208 16.A.1 Washer -spring -main bearing studs (6) -(cyl.block, engine unit, 1600)
LWN208 16.A.21 Washer -spring -main bearing stud (6) -(cyl.block, engine unit, 1622)-
part [no. change was 2K5897
LWN208 TC.A.1 Washer for stud (spring) (6) -(m.brg.cap, cyl.block assy, engine, Twin
Cam)
LWN208 TC.L.1 Washer for nut (spring) (2) -(link to bracket, rear shock absorbers,
Twin Cam)
LWN304 15.A.6 Washer for screw (spring) -blanking plate [Com (E) GD101]
LWN304 15.A.8 Washer for bolt -strainer [Com(E)GB46045-46100 then 46342 on]
LWN304 15.F.2 Washer for set screw (spring) (6) (G.B. extension top cover) -
(was LWN204) -Com.(GB)GD101
LWN304 sup.6 Washer -spring -screw (2) -(htr.blk.plate, cyl.head, engine unit, sup)
LWN304 sup.9 Washer -spring -screw (3) -(strainer to oil pump, engine unit, sup)
LWN304 16.A.6 Washer -spring -screw (2) -(heater outlet, engine unit, 1600)
LWN304 16.A.8 Washer -spring -bolt (3) -(strainer to oil pump, engine unit, 1600)
LWN304 16.A.13 Washer -spring -screw (4) -(fan to pulley, w-pump, engine unit, 1600)
LWN304 16.A.27 Washer -spring -screw (2) -(heater blanking plate, cylinder head,
engine, 1622)
LWN304 16.A.29 Washer -spring -bolt (3) -(oil strainer to pump, engine unit, 1622)
LWN304 16.A.33 Washer -spring -screw (4) -(fan to pulley to pump, engine unit, 1622)
LWN304 16.f.2 Washer -spring -screw (2) -(locating block to gearbox, 1600 and
1600-MK-II)
LWN304 TC.A.13 Washer for screw -spring (3) -(strainer to pump, oil.pump, engine,
Twin Cam)
LWN305 sup.2 Washer -spring -screw (3) -(engine mounting plate, sup)
LWN305 sup.3 Washer -spring -screw (4) -(connecting rods, engine unit, sup)
LWN305 sup.6 Washer -spring -rocker bracket stud (4) -(cyl.head, engine unit, sup)
LWN305 sup.9 Washer -spring -stud (3) -(oil pump, engine unit, sup)
LWN305 sup.11 Washer -spring (4) -(water pump to crankcase, engine unit, sup)
LWN305 sup.11 Washer -spring -screw (2) -(dynamo +distributor mtg, engine unit, sup)
LWN305 16.A.2 Washer -spring -screw (3) (mtg.plate to crankcase) -(was 2K5319)
LWN305 16.A.2 Washer -spring -screw (4) (small end con-rod) -(was 2K5319)
LWN305 16.A.6 Washer -spring -rocker bracket stud (4) -(was 2K5319)
LWN305 16.A.8 Washer -spring -stud (3) -(oil pump to block, engine unit 1600)-
(was 2K5319)
LWN305 16.A.11 Washer -spring -screw (2) -(dynamo bracket to crankcase, engine 1600)-
(was 2K5319)
LWN305 16.A.12 Washer -spring -screw -(adj.link to dynamo, engine unit 1600)-
(was 2K5319)
LWN305 16.A.12 Washer -spring -screw -(dynamo to mounting bracket, engine unit 1600)-
(was 2K5319)
LWN305 16.A.12 Washer -spring -bolt -(dynamo to water pump, engine unit 1600)-
(was 2K5319)
LWN305 16.A.24 Washer -spring -screw [4) -(con.rod small.end, engine unit, 1622)-
(was 2K5319)
LWN305 16.A.26 Washer -spring -rocker bracket stud[4) -(cyl.head, engine unit, 1622)-
(was 2K5319)
LWN305 16.A.26 Washer -spring -stud (3) -(oil pump, engine unit,1622)-
(was 2K5319)
LWN305 16.A.31 Washer -spring -stud (4) -(w-pump to crankcase, engine unit,1622)-
was 2K5319
LWN305 16.A.32 Washer -spring -screw -(adjusting link to dynamo, engine unit, 1622)-
was 2K5319
LWN305 16.A.32 Washer -spring -screw -(dynamo to mounting bracket, eng.unit, 1622)-
was 2K5319
LWN305 16.A.32 Washer -spring -bolt -(dynamo to water pump, engine unit, 1622)-
was 2K5319
LWN305 16.A.32 Washer -spring -screw (6) -(clutch to flywheel, clutch assembly, 1600)
LWN305 16.F.5 Washer -spring -for bolt (4) -(tower, gearbox, 1600 and 1600-MK-II)-
was 2K5319
LWN305 16.H.4 Washer -spring -nut (4) (abutment to plate, rear drum brakes, 1600 and
1600-MK-II) -was 7H7368
LWN306 15.A.12 Washer for nut (spring) -(pillar to plate, dynamo mounting, 1500)-
Com.(E)GD101 -(was LWN206)
LWN306 16.A.11 Washer -spring -pillar -(to plate, dynamo mounting, engine 1600)
LWN306 sup.11 Washer -spring -pillar -(dynamo mounting, 1500)
LWN306 16.A.12 Washer -spring -nut -(dynamo adj.link, engine unit, 1600)
LWN306 16.A.31 Washer -spring -nut -(dynamo adj.link, engine unit, 1622)
LWN307 16.H.1 Washer -spring -bearing cap (4) -(differential, rear axle, 1600 and
1600-MK-II)
LWN307 TC.F.1 Washer for bearing cap -spring(4) -(differential, rear axle, Twin Cam)
LWN307 16.H.5 Washer -spring -bearing cap (4) -(differential, rear axle, ARDB model
1600 and 1600-MK-II) -Com.(C)91240
LWN308 16.L.1 Washer -spring (2) -(bottom, link, rear shock absorber, 1600 and
1600-MK-II) -alternate LWN30
LWN404 15.M.2 Washer for screw (shakeproof) -(5 master cylinder cover screws)
LWN404 15.M.2 Washer for screw (shakeproof) -(2 master cylinder end plate)
LWN404 sup.3 Washer -shakeproof -screw (3) -(cam locating, engine unit, sup)
LWN404 16.A.3 Washer -shakeproof -screw (3) -(cam locating, engine unit, 1600)-
(part.no.change; was LWN606)
LWN404 16.A.24 Washer -shakeproof -screw (3) -(cam locating, engine unit, 1622)
LWN404 16.F.2 Washer -shakeproof -(screw -reverse fork locating, gearbox, 1600 and
1600-MK-II) -was LWN604
LWN404 16.F.2 Washer -shakeproof -(screw -1st-2nd fork locating, gearbox, 1600 and
1600-MK-II) -was LWN604
LWN404 16.F.2 Washer -shakeproof -(screw -3rd-4th fork locating, gearbox, 1600 and
1600-MK-II) -was LWN604
LWN404 16.F.4 Washer -shakeproof -screw -(front selector lever, gearbox, 1600 and
1600-MK-II) -was LWN604
LWN404 16.F.8 Washer -shakeproof -bolt (16) -(caliper assy, rear axle, ARDB model
1600 and 1600-MK-II) -Com.(C)92104 -was 7H8207
LWN404 16.D.8 Washer -shakeproof -nut (2) -(keep plate, pad, caliper assy, rear
axle, ARDB model 1600 and 1600-MK-II) -Com.(C)92104
LWN404 16.M.3 Washer -shakeproof -screw (5) -(cover, master cylinder, std.model,
1600 and 1600-MK-II)
LWN404 16.M.3 Washer -shakeproof -screw (2) -(boot fixing pate, master cylinder,
std.model 1600 and 1600-MK-II)
LWN405 16.R.43 Washer -shakeproof -(optional wing mirror nut, sundries, 1600 and
1600-MK-II)
LWN406 16.R.13 Washer -shakeproof -(control ass'y, windscreen washer kit, windscreen
washer, 1600 and 1600-MK-II) -was 7H782
LWN506 16.M.5 Washer -shakeproof (2) -(front brake hose, hyd.pipes +fittings,
std.model 1600 and 1600-MK-II) -was 17H7141
LWN510 16.E.2 Washer -hose -(at clutch hose on chassis, clutch controls, 1600)
LWN510 16.M.5 Washer -hose (3) -(front and rear brake, hydraulic pipes and fittings,
std.model 1600 and 1600-MK-II)
LWN510 16.M.6 Washer -shakeproof -locknut -(rear hose, hyd.pipes +fittings, ARDB
model 1600 and 1600-MK-II) Com.(C)91240
LWN604 15.A.3 Washer (shakeproof) (camshaft locating plate, engine unit, 1500
LWN604 15.F.2 Lock washer -shakeproof (1st-2nd shift fork, gearbox, 1500)
LWN604 15.F.2 Lock washer -shakeproof (3rd-4th shift fork, gearbox, 1500)
LWN604 15.F.2 Lock washer -shakeproof (reverse fork, gearbox, 1500)
LWN604 15.F.3 Washer for set screw (spring) (front lever, remote ctrl, g-box, 1500)
LWN604 16.F.2 Washer -shakeproof -(screw -reverse fork locating, gearbox, 1600 and
1600-MK-II) -changed to LWN404
LWN604 16.F.2 Washer -shakeproof -(screw -1st-2nd fork locating, gearbox, 1600 and
1600-MK-II) -changed to LWN404
LWN604 16.F.2 Washer -shakeproof -(screw -3rd-4th fork locating, gearbox, 1600 and
1600-MK-II) -changed to LWN404
LWN604 16.F.2 Washer for screw -shakeproof -(front lever, gearbox assy, Twin Cam)
LWN604 TC.F.2 Washer for screw -shakeproof -(1st-2nd fork, gearbox assy, Twin Cam)
LWN604 TC.F.2 Washer for screw -shakeproof -(3rd-4th fork, gearbox assy, Twin Cam)
LWN604 TC.F.2 Washer for screw -shakeproof -(reverse fork, gearbox assy, Twin Cam)
LWN605 15.A.8 Washer (shakeproof) strainer [Fin(E)GB46044 except 46101-46342]
LWN606 16.E.3 Washer -hose -(clutch controls, ARDB model 1600) -Com.(C)91240
LWN606 TC.E.1 Washer (shakeproof) -(hose, master.cyl.assy, clutch, Twin Cam)-
correction was 2K7131
LWN710 15.E.2 Washer for hose -(clutch slave, clutch pedal and linkage, 1500)
LWN710 15.M.3 Washer for hose (2) -(at front brakes, hydraulic pipes+fittings, 1500)
LWN710 15.M.3 Washer for hose (1) -(at battery box, hydraulic pipes+fittings, 1500)
|