The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - LNZ
PART NO.  SPL.PAGE  DESCRIPTION                                                           
LNZ103    15.R.17   Nut for pivot bolt -(control rod lever, bonnet catch control)
LNZ103    16.R.18   Nut -bolt -(control lever, bonnet fittings, 1600 and 1600-MK-II)
LNZ103    TC.R.17   Nut -bolt -(lever pivot, bonnet fittings, Twin Cam)
LNZ104    15.D.3    Nut (2) -(strap and mounting assembly, fuel tank, 1500)
LNZ104    15.O.3    Nut for connector screw (for oil pipes at starter switch bracket)
LNZ104    15.R.10   Nut for actuating lever pivot -(Stiffnut 1/4-28-UNF) -(boot)
LNZ104    16.A.35   Nut (4) -(Stiffnut 1/4-28-UNF, cooler to front apron, eng.unit 1622)
LNZ104    16.D.3    Nut (2) -(strap and mounting assembly, fuel tank, 1600)
LNZ104    16.O.1    Nut -screw -(connector to starter bracket, 1600 and 1600-MK-II)
LNZ104    16.R.10   Nut -actuating lever pivot -(boot lid fittings, 1600 and 1600-MK-II)
LNZ104    TC.A.18   Nut for screw (4) -(oil.cooler, engine, Twin Cam)
LNZ104    TC.A.18   Nut for screw -(clip, cooler pipes, oil.cooler, engine, Twin Cam)
LNZ104    TC.D.3    Nut -strap and mounting assembly (2) -(fuel tank, Twin Cam)
LNZ104    TC.M.2    Nut for stud -(5-way connection, hyd.pipes+fittings, Twin Cam)
LNZ104    TC.O.2    Nut for screw (aerotight) -(oil connector to starter bracket,
    instruments, Twin Cam) -alternate LNZ204
LNZ104    TS.R.9    Nut -actuating lever pivot -(release, boot, Twin Cam)
LNZ104    TC.R.42   Nut for bolt (6) -(fixing trim roll to dash trimming, Coupe, Twin Cam)
LNZ105    15.A.17   Nut -bracket to mounting plate -R/H (2) -(engine mounting, 1500)
LNZ105    15.A.17   Nut for countersunk screw (2) -(engine mounting, 1500)
LNZ105    15.G.1    Nut for bolt (4/8) (propshaft flanges) -
	quantity inceased Com.(C)61035-61504 (interspersed)
LNZ105    15.M.4    Nut for compensator to fulcrum -(parking brake)
LNZ105    16.A.16   Nut -screw (2) -(bracket to mounting plate -(engine mounting, 1600)
LNZ105    16.A.16   Nut -screw (2) -(R/H -bracket to mounting plate -(engine mtg, 1600)
LNZ105    16.A.16   Nut -screw (2) -(L/H -bracket to mounting plate -(engine mtg, 1600)
LNZ105    16.G.1    Nut -bolt (8) -(propshaft, 1600 and 1600-MK-II)
LNZ105    16.H.8    Nut -self-locking (2) -(lever to carrier, rear axle, ARDB model 1600
    and 1600-MK-II) -Com.(C)92104 -was 7H8242
LNZ105    TC.A.22   Nut for screw (lock) (2) -(bracket to mounting plate R/H, engine
    mounting, Twin Cam)
LNZ105    TC.A.22   Nut for screw (lock) (2) -(bracket to mounting plate L/H, engine
    mounting, Twin Cam)
LNZ105    TC.G.1    Nut for bolt (8) -(front+rear flanges, propshaft, Twin Cam)
LNZ105    TC.M.4    Nut for compensator to fulcrum -(hand brake compensator, handbrake,
    Twin Cam)
LNZ106    15.K.3    Nut for bolt (8) -(wishbone inner pivot, front suspension, 1500)
LNZ106    15.M.4    Nut for fulcrum to axle -(parking brake compensator)
LNZ106    16.K.4    Nut -bolt -(pivot to member, front suspension, 1600 and 1600-MK-II)
LNZ106    16.M.7    Nut -fulcrum to axle -(compensator, handbrake, 1600 and 1600-MK-II)
LNZ106    TC.K.3    Nut for bolt (8) -(pivot to member, front suspension, Twin Cam)
LNZ106    TC.M.4    Nut for fulcrum to axle -(hand brake compensator, handbrake, Twin Cam)
LNZ107    15.K.4    Nut for bolt (2) -(link to roll bar, 1600 and 1500) -optional extra
LNZ107    16.K.5    Nut -bolt (2) -(link to roll bar, 1600 and 1600-MK-II std.model)-
    optional extra
LNZ107    TC.K.4    Nut -bolt (2) -(link to roll bar, Twin Cam) -Com.(C)2275
LNZ108    15.A.17   Nut for rear mounting bush bolt -(engine mounting)
LNZ108    15.K.1    Nut for steering lever -Fin.(C)54246
LNZ108    16.A.16   Nut -bolt -(rear engine mounting, engine unit, 1600)
LNZ108    TC.A.22   Nut for bolt (lock) -(flex.bush, rear engine mounting, Twin Cam)
LNZ110    15.K.1    Nut for steering lever -Com.(C)54247
LNZ110    16.K.1    Nut -steering lever (2) -(front axle and suspension, 1600 and
    1600-MK-II std.model) -Alternatives: LNZ210, LNZ310
LNZ110    TC.K.1    Nut for steering lever (2) -(front suspension, Twin Cam) -alternate
    LNZ210
LNZ203    15.R.14   Nut for screw (4) -(fixing handles to doors, door fittings, 1500 C)
LNZ203    16.R.15   Nut -screw (4) -(fixing handle, door fittings, 1600 and 1600-MK-II
    Coupe)
LNZ203    TC.R.14   Nut for screw (4) -(fixing handle, door fittings, Coupe, Twin Cam)
LNZ204    15.R.15   Nut for pivot bolt -(vent, f+v ass'y, 1500 C) -(cor. to 2K3975)
LNZ204    16.R.16   Nut -bolt -(pivot, vent assy, windows, door, 1600 and 1600-MK-II
    Coupe) -(cor. to 2K3975) -1/4-26-BSF hex nut (not 1/4-28-UNF)
LNZ204   16.R.44    Nut -screw (6) -(luggage carrier to boot lid, sundries, 1600 and
    1600-MK-II)
LNZ204    TC.O.2    Nut for screw (aerotight) -(oil connector to starter bracket,
    instruments, Twin Cam) -alternate LNZ104
LNZ204    TC.R.16   Nut for bolt -(vent pivot, ventilator assy, windows, Twin Cam)-
    changed to 2K3975, part number correction -1/4-26-BSF hex nut (not 1/4-28-UNF)
LNZ205    15.A.12   Nut for bolt dynamo to rear bracket
LNZ205    15.A.12   Nut for bolt dynamo to water pump
LNZ205    15.J.2    Nut for rack to bracket bolt front (nylon) (2) -(steering, 1500)
LNZ205    15.M.2    Nut -locking -(2 push-rod, master cylinder)
LNZ205    15.R.41   Nut (nylon) for screw (6) -(luggage grid to boot lid, (sundries 1500)
LNZ205    16.A.12   Nut -bolt -(dynamo to water pump -engine unit 1600)
LNZ205    16.A.32   Nut -bolt -(dynamo to mounting brcket -engine unit 1622)
LNZ205    16.A.32   Nut -bolt -(dynamo to dynamo to water pump -engine unit 1622)
LNZ205    16.E.4    Nut -bolt (2) -(fixing cylinder, master, clutch controls, AWDB 1600)
    Com.(C)91240
LNZ205    16.J.2    Nut -bolt (2) -(rack to bracket -front, steering, 1600 and 1600-MK-II)
LNZ205    16.M.3    Nut -lock (2) -(push rod, master cylinder, std.model 1600 and
    1600-MK-II)
LNZ205    16.M.4    Nut -screw (2) -(fixing master cylinder, ARDB model 1600 and
    1600-MK-II) Com.(C)91240
LNZ205    TC.A.17   Nut for bolt (2) -(dynamo to water pump and inlet manifold,
    dist+dynamo mountings, engine, Twin Cam)
LNZ205    TC.J.2    Nut for bolt (2) -(rack to bracket (front) (2) -(steering, Twin Cam)
LNZ205    TC.E.1    Nut for bolt (2) -(fixing cylinder, master.cyl.assy, clutch, Twin Cam)
LNZ205    TC.M.2    Nut for bolt (2) -(fixing brake master cylinder, Twin Cam)
LNZ205    TC.R.55   Nut for screw (6) -(luggage carrier to boot lid, sundries, Twin Cam)-
    optional
LNZ206    15.A.12   Nut for adjusting link to pillar (locking)
LNZ206    16.A.12   Nut -adjusting link -(locking, dynamo, engine unit, 1600)
LNZ206    16.A.15   Nut -spring -stud (3) -(exhaust pipe flange, engine unit, 1600)
LNZ206    16.A.32   Nut -adjusting link -(dynamo, engine unit, 1622)
LNZ206    16.F.4    Nut -bolt -stiff -(withdrawl lever) -(gearbox, 1600 & 1600-MK-II)
LNZ206    TC.A.21   Nut for manifold stud (self locking) (2) -(inlet, engine, Twin Cam)
LNZ206    TC.F.3    Locknut for bolt -(withdrawl lever, gearbox, Twin Cam)
LNZ208    15.F.4    Locknut for bolt (clutch release arm) -Com.(E)4525 -(was FNZ206)
LNZ208    15.K.1    Nut for steering lever -Fin.(C)54246
LNZ208    16.K.4    Nut for steering lever -Fin.(C)54246
LNZ210    16.K.1    Nut -steering lever (2) -(front axle and suspension, 1600 and
    1600-MK-II std.model) -Alternatives: LNZ110, LNZ310
LNZ210    TC.K.1    Nut for steering lever (2) -(front suspension, Twin Cam) -alternate
    LNZ110
LNZ310    16.K.1    Nut -steering lever (2) -(front axle and suspension, 1600 and
    1600-MK-II std.model) -Alternatives: LNZ110, LNZ210
HomeBackTopNext
Thank you for your comments --Send e-mail to <Barney Gaylord>
© 2020 Barney Gaylord --Copyright and reprint information