The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 88G
PART NO.  SPL.PAGE  DESCRIPTION                                                           
88G208    16.F.2    Joint washer -speedometer pinion bush -(gearbox, 1600 & 1600-MK-II)-
    was 51K3169
88G219    16.A.6    Gasket -plug (4) -(washer for spark plugs, engine unit, 1600) -(part
    no. change; was 11G145 and 2K5211)
88G219    16.A.27   Gasket for plug (4) -(washer for spark plugs, engine unit, 1622)-
    (part no. change; was 11G145 and 2K5211)
88G235    16.D.1    Housing -coil -(pump assy, fuel pump, fuel system, 1600) -Com.(C)1381-
    was AUB6007
88G252    16.A.3    Camshaft -(engine, 1600) -(part.no.change; was 1H729, and-
    1H1435 corection; was 17H30
88G252    16.A.24   Camshaft -(engine, 1622) -(part.no.change; was 1H729, and-
    1H1435 corection; was 17H30
88G253    16.F.4    Lever -selector -rear -(gearbox, 1600 and 1600-MK-II) -was 1H3095 and
    22H25
88G254    16.F.4    Leaver -selector -front -(gearbox, 1600 and 1600-MK-II) -was
    1G3680 and 22H24
88G256    16.A.9    Joint washer -oil reservoir -(engine unit, 1600) -(was 1G2290)
88G256    16.A.29   Joint -reservoir to crankcase -(oil, engine unit, 1622) -(was 12H397)
88G257    16.A.9    Plug -drain -(oil reservoir, engine, 1600)
88G257    16.A.30   Plug -drain -(oil reservoir, engine, 1622) -part no. changed, was
    2F4249 and 2A380
88G258    16.F.3    Shaft -reverse -(gearbox, 1600 and 1600-MK-II) -was 11G3124 & 11G3093
88G276    16.K.1    Nut -wheel stud (8) -(front suspension, 1600 and 1600-MK-II standard
    model) -was ATB7074 -was ATB7074 and BTB415
88G284    16.H.2    Crown wheel and pinion 9/41 -(rear axle, 1600 and 1600-MK-II)-
    Optional alternative rtioto 10/43 or 10/41; part no. change was ATB7146 and BTB57
88G290    16.P.1    Cover -disc wheel -(std.model 1600 and 1600-MK-II) -part no.change was
    ACA5221 and ACA8304
88G296    sup.9     Pump assembly -oil -(engine unit, sup)
88G296    16.A.8    Pump assembly -oil -(engine unit, 1600)
88G296    16.A.29   Pump assembly -oil -(engine unit, 1600-MK-II) -part number change, was
    1H1191
88G320    16.H.2    Seal -oil -(differential pinion, rear axle, 1600 & 1600-MK-II)-
    part no. change was ATA7047
88G329    16.S.1    Hammer -copper -(tool kit, 1600 and 1600-MK-II) -was 11B5166
88G401    16.A3.17  Silencer -front (Switzerland) -(exhaust system, 1622)- Com.(c)104805-
    was ARH192
HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2020, 2024 Barney Gaylord -- Copyright and reprint information