The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 7H
PART NO.  SPL.PAGE  DESCRIPTION                                                           
7H1694    15.O.2    Cable -inner (speedometer) -changed to 17H1346 -Com.(C)17588 -
    Fin.(C)61503
7H1695    15.O.2    Cable inner -changed to 17H630 Com.(C)17588
7H1709    15.P.1    Nipple for spoke (240) -(optional, for 5 48-spoke wheels)
7H1709    16.P.1    Nipple -spoke -short (240) -(optional, for 5 48-spoke wheels, road 
    wheels, 1600 and 1600-MK-II)
7H1764    15.A.9    Spring (oil filter) -(Tecalemit, engine unit, 1500)
7H1764    sup.10    Spring -(oil filter, Tecalemit, engine unit, sup)
7H1764    16.A.9    Spring -(oil filter, Tecalemit, engine unit, 1600)
7H1764    16.A.30   Spring -(oil filter, Tecalemit, engine unit, 1622)
7H1764    TC.A.13   Spring -(oil.filter, engine, Twin Cam)
7H1782    16.R.13   Washer -shakeproof -(control ass'y, windscreen washer kit, windscreen
    washer, 1600 and 1600-MK-II) -changed to LWN406
7H1790    15.A.8    Body and plug (oil pump)
7H1790    TC.A.13   Body (with plug) -(oil.pump, engine, Twin Cam)
7H1791    15.A.8    Cover (oil pump) -changed to 17H1712 Com.(E)GB46045 to 46100-
    then 46342 on
7H1792    15.A.8    Shaft -driving (with rotors) -(oil pump, engine unit, 1500)
7H1792    sup.9     Shaft (with rotors) -(driving oil pump, engine unit, sup)
7H1792    16.A.8    Shaft -driving (with rotors) -(oil pump, engine unit, 1600)
7H1792    16.A.29   Shaft -driving (with rotors) -(oil pump, engine unit, 1622),
    breakdown parts for Holburn Eaton oil pumps only
7H1792    TC.A.13   Shaft with rotors -driving -(oil.pump, engine, Twin Cam)
7H1793    sup.9     Dowel (2) -(oil pump, engine unit, sup)
7H1793    16.A.8    Dowel (2) -(oil pump, engine unit, 1600)
7H1793    16.A.29   Dowel (2) -(oil pump, engine unit, 1622), breakdown parts for Holburn
    Eaton oil pumps only
7H1793    TC.A.13   Dowel (2) -(oil.pump.cover, oil.pump, engine, Twin Cam)
7H1805    15.P.1    Spoke -long (80) -(optional, for 5 48-spoke wheels, road wheels,
    1500)
7H1805    16.P.1    Spoke -long (80) -(optional, for 5 48-spoke wheels, road wheels,
    1600 and 1600-MK-II)
7H1806    15.P.1    Spoke -short (160) -(optional, for 5 48-spoke wheels, road wheels,
    1500)
7H1806    16.P.1    Spoke -short (160) -(optional, for 5 48-spoke wheels, road wheels,
    1600
    and 1600-MK-II)
7H1907    16.R.44   Clamp -cable -(tube assy, heater assy, heater, 1600 and 1600-MK-II)
7H1948    15.A.9    Washer -sealing (oil filter) -(Tecalemit, engine unit, 1500)
7H1948    sup.10    Washer -sealing -(oil filter, Tecalemit, engine unit, sup)
7H1948    16.A.9    Washer -sealing (oil filter) -(Tecalemit, engine unit, 1600)
7H1948    16.A.30   Washer -sealing -(oil filter,Tecalemit, engine unit, 1622)
7H1948    TC.A.13   Washer -sealing (bottom) -(oil.filter, engine, Twin Cam)
7H1952    15.A.9    Circlip (oil filter) -(Tecalemit, engine unit, 1500)
7H1952    sup.10    Circlip -(oil filter, Tecalemit, engine unit, sup)
7H1952    16.A.9    Circlip -(oil filter, Tecalemit, engine unit, 1600)
7H1952    16.A.30   Circlip -(oil filter, Tecalemit, engine unit, 1622)
7H1963    15.A.9    Valve assembly [Fin (E) GB26660 except 26701=26933]
7H1964    15.A.9    Container (oil filter) (changed to 1H1069)
7H1965    15.A.9    Bolt -centre -(oil filter, Tecalemit, engine unit, 1500)
7H1965    sup.10    Bolt -centre -(oil filter, Tecalemit, engine unit, sup)
7H1965    TC.A.13   Bolt -centre -(oil.filter, engine, Twin Cam)
7H1965    16.A.9    Bolt -centre -(oil filter, Tecalemit, engine unit, 1600)
7H1965    16.A.30   Bolt -centre -(oil filter, Tecalemit, engine unit, 1622)
7H1968    15.A.9    Washer -(felt) (oil filter, Tecalemit, engine unit, 1500)
7H1968    sup.10    Washer (felt) -(oil filter, Tecalemit, engine unit, sup)
7H1968    16.A.9    Washer (felt) -(oil filter, Tecalemit, engine unit, 1600)
7H1968    16.A.30   Washer (felt) -(oil filter, Tecalemit, engine unit, 1622)
7H1968    TC.A.13   Washer (felt) -(oil.filter, engine, Twin Cam)
7H1969    15.A.9    Washer -(steel) (oil filter) -(Tecalemit, engine unit, 1500)
7H1969    sup.10    Washer (steel) -(oil filter, Tecalemit, engine unit, sup)
7H1969    16.A.9    Washer (steel) -(oil filter, Tecalemit, engine unit, 1600)
7H1969    16.A.30   Washer (steel) -(oil filter, Tecalemit, engine unit, 1622)
7H1969    TC.A.13   Washer (steel) -(oil.filter, engine, Twin Cam)
7H1980    15.R.42   Knob -(heater control, heater, 1500) -(second type)
7H1980    16.R.45   Knob -(lever control assembly, heater, 1600 and 1600-MK-II)-
    (second type) -changed to 17H490
7H1981    15.R.42   Knob -(heater control, heater, optional, 1500)-(first type)
7H1984    15.R.42   Lever control -(heater, optional, 1500)-(first type)
7H1985    15.R.42   Lever control sub-assembly -(heater, optional, 1500)-(second type)
7H1985    16.R.45   Lever control sub-assembly -(heater, optional, 1600 and 1600-MK-II)-
    (second type)
7H1985    TC.R.56   Lever control sub-assembly -(lever assy, heater, optional, 1600 and
    1600-MK-II) -(second type)
7H1986    15.R.42   Lever and switch assembly -(heater, optional, 1500)-(second type)
7H1986    16.R.45   Lever and switch assembly -(lever control sub-assy, lever control
    assy, heater, 1600 and 1600-MK-II) -(second type)
7H1986    TC.R.56   Lever and switch assembly -(lever control sub-assy, lever control
    assy, heater, Twin Cam)
7H1988    15.R.42   Screw fixing outlet door (4) -(heater, optional, 1500)
7H1990    15.R.42   Screw for water valve -(heater, optional, 1500)
7H1991    15.R.42   Nut for water valve   -(heater, optional, 1500)
7H1992    15.R.42   Washer (spring) for water valve -(heater, optional, 1500)
7H1993    15.R.42   Grommet (2) -(heater, optional, 1500)
7H1993    16.R.45   Grommet (2) -(heater assy, heater, 1600 and 1600-MK-II)
7H1993    TC.R.56   Grommet (1) -(heater unit assy, heat+vent equip, Twin Cam)
7H1994    15.R.42   Flap valve assembly  -(heater, optional, 1500)
7H1995    15.R.42   Outlet door assembly -(heater, optional, 1500)
7H1995    16.R.45   Door assembly -outlet -(heater assy, heater, 1600 and 1600-MK-II)-
    not available use component parts
7H1996    15.R.42   Flap -(for flap valve ass'y, heater, optional, 1500)
7H1996    16.R.45   Flap -valve -(tube assy, heater unit assy, heater, optional, 1600
    and 1600-MK-II)
7H1997    15.R.45   Clamp for cable (3) -(heater, optional, 1500)
7H1997    16.R.45   Clamp -cable) -(door assy, heater assy, heater, 1600 and 1600-MK-II)
7H1998    15.R.42   Side cover -heater -(heater, optional, 1500)
7H1998    16.R.45   Cover -(heater unit assy, heater, optional, 1600 and 1600-MK-II)
7H1999    15.R.42   Clip for side cover -(heater, optional, 1500)
7H2724    16.E.1    Nut (3) -(for eyebolt, cover assy, clutch, 1600) -was 7H3193
7H3001    15.E.1    Retainer for release lever (3) -(clutch cover, clutch, 1500)
7H3001    16.E.1    Retainer -release lever (3) -(cover assy, clutch, 1600)
7H3001    TC.A.5    Retainer -release lever (3) -(clutch, Twin Cam)
7H3048    15.E.1    Retainer for bearing (2) -(cover assy, clutch, 1500)
7H3048    16.E.1    Retainer - bearing (2) -(cover assy, clutch, 1600)
7H3048    TC.A.5    Retainer - bearing (2) -(carbon release, clutch, Twin Cam)
7H3067    15.E.1    Pin for release lever (3) -(clutch cover, clutch, 1500)
7H3067    TC.A.5    Pin for release lever (3) -(clutch, Twin Cam)
7H3069    15.E.1    Strut for release lever (3) -(clutch cover, clutch, 1500)
7H3069    16.E.1    Strut -release lever (3) -(cover assy, clutch, 1600)
7H3069    TC.A.5    Strut -release lever (3) -(clutch, Twin Cam)
7H3078    15.E.1    Rivet (22) -(for lining, driven plate, clutch, 1500)
7H3078    16.E.1    Rivet (22) -(for lining, driven plate, clutch, 1600)
7H3078    TC.A.5    Rivet (22) -(for lining, driven plate, clutch, Twin Cam)
7H3085    15.E.1    Plate -pressure -(clutch cover, clutch, 1500)
7H3085    16.E.1    Plate -pressure -(cover assy, clutch, 1600)
7H3169    16.E.1    Spring, thrust (light grey) (6) -(cover assy, clutch, 1600)
7H3169    TC.A.5    Spring, pressure plate (6) -(clutch, Twin Cam)
7H3171    15.E.1    Spring -anti-rattle (3) -(clutch cover, clutch, 1500)
7H3171    16.E.1    Spring -anti-rattle (3) -(cover assy, clutch, 1600)
7H3171    TC.A.5    Spring -anti-rattle (3) -(clutch, Twin Cam)
7H3193    16.E.1    Nut (3) -(for eyebolt, clutch cover, clutch,1600) -changed to 17H2724
7H3193    16.E.1    Nut (3) -(for eyebolt, cover assy, clutch,1600) -changed to 17H2724
7H3193    TC.A.5    Nut (3) -(eyebolt, clutch cover assy, clutch, Twin Cam)
7H3196    15.E.1    Lever release (3) -(clutch cover, clutch, 1500)
7H3196    16.E.1    Lever release (3) -(cover assy, clutch, 1600)
7H3197    16.E.1    Eyebolt (3) -(cover assy, clutch, 1600)
7H3197    TC.A.5    Eyebolt (3) -(clutch cover assy, clutch, Twin Cam)
7H3211    15.E.1    Clutch assembly -(clutch, 1500) -changed to 27H3159 Com.(E)BG16226
7H3213    15.E.1    Plate -release lever -(clutch cover, clutch, 1500)
7H3213    16.E.1    Plate -release lever -(cover assy, clutch, 1600)
7H3213    TC.A.5    Plate -release lever -(clutch, Twin Cam)
7H3214    15.E.1    Bearing assembly -release -(clutch, 1500)
7H3214    16.E.1    Bearing assembly -release -(clutch, 1600)
7H3214    TC.A.5    Bearing assembly -release -(clutch, Twin Cam)
7H3215    15.E.1    Plate -driven assembly -(clutch, 1500)
7H3277    15.E.1    Bearing -carbon -(release bearing assembly, clutch, 1500)
7H3277    16.E.1    Ring -carbon -(release bearing assy, clutch, 1600)
7H3277    TC.A.5    Bearing -(carbon release, clutch, Twin Cam)
7H3565    15.J.2    Clip for boot (2) -(tie rod end) -(steering, 1500)
7H3565    16.J.2    Clip -boot (2) -(tie rod end) -(steering, 1600 and 1600-MK-II)
7H3565    TC.J.1    Clip for boot (2) -(tie rod end, steering, Twin Cam)
7H3571    15.J.2    Boot (rubber) (2) -(tie rod end) -(steering, 1500)
7H3571    16.J.2    Boot (rubber) (2) -(tie rod end) -(steering, 1600 and 1600-MK-II)-
    changed to 7H3762
7H3571    TC.J.1    Boot for ball socket (2) -(tie rod end, steering, Twin Cam) -changed
    to 7H3762
7H3762    16.J.2    Boot (rubber) (2) -(tie rod end) -(steering, 1600 and 1600-MK-II)-
    was 7H3571
7H3762    16.J.2    Boot for ball socket (2) -(tie rod end, steering, Twin Cam) -was
    7H3571
7H3763    TC.J.1   Ring for boot) (2) -(tie rod end, steering, Twin Cam) -was ACA6004
7H3763    16.J.2   Ring for boot) (2) -(tie rod end, steering, Twin Cam) -was ACA6004
7H3858    15.G.1    Lubricator -journal (2) -(propshaft, 1500)
7H3858    16.G.1    Lubricator -journal (2) -(propshaft, 1600 and 1600-MK-II)
7H3858    TC.G.1    Lubricator -journal (2) -(propshaft, Twin Cam)
7H3863    15.G.1    Yoke -flange (rear of propshaft) -(propshaft, 1500)
7H3863    16.G.1    Flange -yoke -(rear, propshaft, 1600 and 1600-MK-II)
7H3863    TC.G.1    Yoke flange (2) -(propshaft, Twin Cam)
7H3865    15.G.1    Yoke -sleeve assembly -(front, propshaft, 1500) -Com.(C)61037-61504
    (interspersed) -(was 17H3868)
7H3865    16.G.1    Sleeve assembly -yoke -(front, propshaft, 1600 and 1600-MK-II)
7H3865    TC.G.1    Yoke sleeve assembly -(front, propshaft, Twin Cam)
7H3874    15.G.1    Bearing assembly -needle (8) -(propshaft) -
    Change to 17H3955 Com.(C)61037-61504 (interspersed)
7H3877    15.G.1    Circlip -bearing (8) -(propshaft, 1500)
7H3877    16.G.1    Circlip -bearing (8) -(propshaft, 1600 and 1600-MK-II)
7H3877    TC.G.1    Circlip (8) -(propshaft, Twin Cam)
7H3878    15.G.1    Cap -dust -(propshaft, 1500, style #3 front) -Com.(C)61037-61504
    (interspersed)
7H3878    16.G.1    Dust cap -(front, propshaft, 1600 and 1600-MK-II)
7H3878    TC.G.1    Dust cap -yoke sleeve -(propshaft, Twin Cam)
7H3879    15.G.1    Washer -steel -(front, propshaft, 1500, #3 front) -Com.(C)61037-61504
    (interspersed)
7H3879    16.G.1    Washer -steel -(front, propshaft, 1600 and 1600-MK-II)
7H3879    TC.G.1    Washer for dust cap (steel) -(propshaft, Twin Cam)
7H3880    15.G.1    Washer -cork -(front, propshaft, 1500, #3 front) -Com.(C)61037-61504
    (interspersed)
7H3880    16.G.1    Washer -cork -(front, propshaft, 1600 and 1600-MK-II)
7H3880    TC.G.1    Washer for dust cap (cork) -(propshaft, Twin Cam)
7H4030    16.E.4    Ball -bleed screw -(cyl.assy, clutch.op.cyl, clutch controls, ARDB
    model 1600) -Com.(C)91240 -changed to BLS106
7H4030    TC.E.2    Ball -bleed screw -(slave.cyl.assy, Twin Cam)
7H4379    TC.E.1    Cap -filler -(master.cyl.assy, clutch, Twin Cam)
7H4419    16.E.4    Cap -bleed screw dust -(cyl.assy, clutch.op.cyl, clutch controls,
    ARDB model 1600) -Com.(C)91240
7H4419    TC.E.2    Cap -bleed screw dust -(slave.cyl.assy, Twin Cam)
7H4451    16.E.3    Circlip -(retaining, clutch m/c, clutch controls, ARDB model 1600)-
    Com.(C)91240
7H4451    TC.E.1    Circlip -(washer retaining, master.cyl.assy, clutch, Twin Cam)
7H4726    16.E.3    Gasket -(cap, clutch m/c, clutch controls, ARDB model 1600)-
    Com.(C)91240
7H4726    TC.E.1    Gasket -(cap, master.cyl.assy, clutch, Twin Cam)
7H4750    TC.E.1    Seal -valve -(master.cyl.assy, clutch, Twin Cam)
7H4751    TC.E.1    Stem -valve -(master.cyl.assy, clutch, Twin Cam)
7H4752    16.E.3    Washer -spring -(clutch m/c, clutch controls, ARDB model 1600)-
    Com.(C)91240
7H4752    TC.E.1    Washer -spring -(master.cyl.assy, clutch, Twin Cam)
7H4756    16.E.3    Washer -retaining -(clutch m/c, clutch controls, ARDB model 1600)-
    Com.(C)91240
7H4756    TC.E.1    Washer -retaining -(master.cyl.assy, clutch, Twin Cam)
7H4757    16.E.3    Cover -dust -(clutch m/c, clutch controls, ARDB model 1600)-
    Com.(C)91240
7H4757    TC.E.1    Cover -dust -(master.cyl.assy, clutch, Twin Cam)
7H4944    16.E.3    Spring -(clutch m/c, clutch controls, ARDB model 1600) -Com.(C)91240
7H4944    TC.E.1    Spring -(master.cyl.assy, clutch, Twin Cam)
7H4970    16.E.4    Spring -(cyl.assy, clutch.op.cyl, clutch controls, ARDB model 1600)-
    Com.(C)91240
7H4970    TC.E.2    Spring -(slave.cyl.assy, Twin Cam)
7H4973    16.E.4    Screw -bleed -(cyl.assy, clutch.op.cyl, clutch controls, ARDB model
    1600) -Com.(C)91240
7H4973    TC.E.2    Screw -bleed -(slave.cyl.assy, Twin Cam)
7H4976    16.E.3    Seal -plunger -(clutch m/c, clutch controls, ARDB model 1600)-
    Com.(C)91240 -for use with 17H4510 Plunger and 17H4755 Plunger
7H4976    TC.E.1    Seal -plunger -(master.cyl.assy, clutch, Twin Cam)
7H5027    15.N.1    Band cover -(dynamo, 1500)
7H5028    15.N.1    Brush (1-set) (-dynamo, 1500)
7H5028    16.N.1    Brush (1-set) -(dynamo, 1600 and 1600-MK-II) -change to 47H5388
    Com.(E)16GA/H6272
7H5028    TC.N.1    Brush (1-set) -(dynamo, Twin Cam)
7H5029    15.N.2    Sleeve -screwed (with control nut)  (starter)
7H5031    15.N.1    Spring -brush tension (1 set) -(dynamo, 1500)
7H5031    16.N.1    Spring -brush tension (1 set) -(dynamo, 1600 and 1600-MK-II) -changed
    to 47H5389 Com.(E)GA/H6272
7H5031    TC.N.1    Spring -brush tension (1 set) -(dynamo, Twin Cam)
7H5034    16.N.1    Nut-shaft -(dynamo, 1600 and 1600-MK-II) -change to FNN207-
    Com.(E)GA/H6272
7H5038    15.N.2    Band -cover -(starter, 1500)
7H5038    16.N.2    Band -cover -(starter, 1600 and 1600-MK-II)
7H5038    TC.N.2    Band -cover -(starter, Twin Cam)
7H5039    15.N.2    Cap for shaft -(starter, 1500)
7H5039    16.N.2    Cap for shaft -(starter, 1600 and 1600-MK-II) -Fin.(E)16GC/H6434
7H5039    TC.N.2    Cap for shaft -(starter, Twin Cam)
7H5040    15.N.2    Brushes (1 set) -(starter, 1500)
7H5040    16.N.2    Brushes (1 set) -(starter, 1600 and 1600-MK-II)
7H5040    TC.N.2    Brushes (1 set) -(starter, Twin Cam)
7H5041    15.N.2    Bracket -commutator end -(starter, 1500)
7H5041    16.N.2    Bracket -commutator end -(starter, 1600 and 1600-MK-II) -changed to
    47H5339 Com.(E)16GC/H6435
7H5041    TC.N.2    Bracket -commutator end -(starter, Twin Cam)
7H5042    15.N.2    Bush -commutator end -(starter, 1500)
7H5042    16.N.2    Bush -commutator end -(starter, 1600 and 1600-MK-II) -changed to
    47H5340 Com.(E)16GC/H6435 -use 27H6708 for this application
7H5042    TC.N.2    Bush -bearing -(bracket assembly, commutator end, starter, Twin Cam)
7H5043    15.N.2    Spring -brush tension (2 set) -(starter, 1500)
7H5043    16.N.2    Spring -brush tension (for bracket with split support post) (1 set)-
    (starter, 1600 and 1600-MK-II) -See service memorndum MG/347
7H5043    TC.N.2    Spring set -brush tension (for bracket with split support post)-
    (bracket assembly, commutator end, starter, Twin Cam)
7H5044    15.N.2    Nut for shaft -(starter, 1500)
7H5045    15.N.2    Spring -pinion main -(starter, 1500)
7H5045    16.N.2    Spring -pinion main -(starter, 1600 and 1600-MK-II)
7H5045    TC.N.2    Spring -pinion main -(starter, Twin Cam)
7H5046    15.N.2    Pinion and Barrel -(starter, 1500)
7H5046    16.N.2    Pinion and Barrel -(starter, 1600 and 1600-MK-II) -change to 67H5010
    Com.(E)16GC/H6435
7H5046    TC.N.2    Pinion and Barrel -(starter, Twin Cam)
7H5047    15.N.2    Spring -pinion return -(starter, 1500)
7H5047    16.N.2    Spring -pinion return -(starter, 1600 and 1600-MK-II)
7H5047    TC.N.2    Spring -pinion return -(starter, Twin Cam)
7H5048    15.N.2    Bracket -driving end -(starter, 1500)
7H5048    16.N.2    Bracket -driving end -(starter, 1600 and 1600-MK-II) -change to
    67H5014 -Com.(E)16GC/H6435
7H5048    TC.N.2    Bracket -driving end -(starter, Twin Cam)
7H5049    15.N.2    Bush -driving end -(starter, 1500)
7H5049    16.N.2    Bush -driving end -(starter, 1600 and 1600-MK-II) -change to 47H5346-
    Com.(E)16GC/H6435
7H5049    TC.N.2    Bush -(drive end bracket assy, starter, Twin Cam)
7H5050    15.N.2    Armature -(starter, 1500)
7H5050    16.N.2    Armature -(starter, 1600 and 1600-MK-II) -change to 67H5012-
    Com.(E)16GC/H6435
7H5050    TC.N.2    Armature -(starter, Twin Cam)
7H5051    15.N.2    Field coils (1 set) -(starter, 1500)
7H5051    16.N.2    Coils -field coils (1 set) -(starter, 1600 and 1600-MK-II)
7H5051    TC.N.2    Coils -field coils (1 set) -(starter, Twin Cam)
7H5062    15.N.5    Bulb holder (France) -Fin.(C)60389
7H5066    16.N.4    Resisteance -63 ohms (carbon type) -(control box, switches, 1600 and
    1600-MK-II) -see service memorandum MG/342
7H5066    TC.N.4    Resisteance -63 ohms (carbon type) -(control box, switches,
    electrical, Twin Cam) -see service memorandum MG/342
7H5067    15.N.4    Fuse -35-amp (17/35 slow blow) (4) -(switches, 1500)
7H5067    16.N.4    Fuse -35-amp (17/35 slow blow) (4) -(switches, 1600 and 1600-MK-II)
7H5067    TC.N.4    Fuse -35-amp (17/35 slow blow) (4) -(switches, electrical, Twin Cam)
7H5071    15.N.1    Field coils (1 set) -(dynamo, 1500)
7H5071    16.L.1    Coils -field (1 set) -(dynamo, 1600 and 1600-MK-II) -changed to
    47H5390 Com.(E)16GA/H6272
7H5071    TC.N.1    Coils -field (1 set) -(dynamo, Twin Cam)
7H5086    16.B.1    Rotor arm -(distributor, ignition, 1600)
7H5086    16.B.1    Rotor arm -(distributor, ignition, 1600) -Com.(E)16GC/H101
7H5086    TC.B.1    Rotor arm -(distributor, ignition, Twin Cam) -for all service
    replacements AEJ41 distributor must be used see service memo MG301
7H5118    TC.B.1    Dog -driving -(distributor, ignition, Twin Cam) -changed to 47H5249-
    Com.(E)2223 -for all service replacements AEJ41 distributor must be used see service
    memo MG301
7H5121    15.N.6    Window (for number-plate lamp)
7H5121    16.N.10   Window -lamp -(tag, road lamps, 1600) -Com.(C)88844 -changed to 57H5128
7H5121    TC.N.7    Window -(number plate lamp, road lamps, Twin Cam)
7H5122    15.N.6    Joint (for number-plate lamp)
7H5122    16.N.10   Joint -lamp base -(tag lamp, road lamps, 1600) -changed to 57H5368
7H5122    TC.N.7    Joint -lamp base -(number plate lamp, road lamps, Twin Cam)
7H5123    15.N.6    Sundry parts (1-set for number-plate lamp)
7H5123    16.N.10   Sundry parts (1-set) -(tag lamp, road lamps, 1600 and 1600-MK-II)
7H5123    TC.N.7    Sundry parts (1-set) -(number plate lamp, road lamps, Twin Cam)
7H5128    16.N.4    Clip -cover -(control box, switches, 1600 and 1600-MK-II)
7H5128    16.N.4    Clip -cover -(control box, switches, electrical, Twin Cam)
7H5130    15.N.9    Brushes -(1 set) -(wiper motor, 1500)
7H5130    16.N.13   Brushes -(1 set) -(wiper motor, 1600 and 1600-MK-II)
7H5130    TC.N.11   Brushes -(1 set) -(wiper motor, windscreen wiper, electrical, Twin Cam)
7H5156    15.N.2    Sundry parts (1 set) (starter)
7H5156    16.N.2    Sundry parts (1 set) -(starter, 1600 and 1600-MK-II)
7H5156    TC.N.2    Sundry parts (1 set) -(starter, Twin Cam)
7H5164    15.N.6    Grommet (for number-plate lamp)
7H5164    16.N.10   Grommet -cable -(tag lamp, road lamps, 1600) -Fin.(C)not-available-
    changed to 5L321
7H5164    TC.N.7    Grommet -cable -(number plate lamp, road lamps, Twin Cam)
7H5182    16.N.10   Rim (2) -(tail, road lamps, 1600) -Fin.(C)100351
7H5182    TC.N.8    Rim (2) -(flasher (rear), tail, road lamps, Twin Cam) -Com.(C)2193
7H5185    15.N.6    Cover (for number-plate lamp)
7H5185    16.N.10   Cover -(tag lamp window, road lamps, 1600)
7H5185    TC.N.7    Cover -(number plate lamp, road lamps, Twin Cam)
7H5502    TC.N.7    Interior -bulb holder (2) -(tail, road lamps, Twin Cam) Com.(C)2193-
    was AJH5100
7H5376    15.N.1    Sundry parts (1 set) -(dynamo, 1500)
7H5376    16.L.1    Sundry parts (1 set) -(dynamo, 1600 and 1600-MK-II) -change to
    57H5085 Com.(E)16GA/H6272
7H5376    TC.N.1    Sundry parts (1 set) -(dynamo, Twin Cam)
7H5387    15.N.1    Bracket -commutator end (dynamo)
7H5387    16.N.1    Bracket assembly -commutator end -(dynamo, 1600 and 1600-MK-II)-
    changed to 47H5395 Com.(E)16GA/H6272
7H5388    15.N.1    Bracket -driving end -(dynamo, 1500)
7H5388    16.N.1    Bracket assembly -drive end -(dynamo, 1600 and 1600-MK-II) change to
    47H5393 Com.(E)16GA/H6272
7H5389    15.N.1    Armature (dynamo, 1500)
7H5389    16.L.1    Armature assembly -(dynamo, 1600 and 1600-MK-II) -change to 47H5391-
    Com.(E)16GA/H6272 -not available use 27H3574
7H5389    TC.N.1    Armature -(dynamo, Twin Cam)
7H5390    15.N.1    Bush for bracket -(dynamo, 1500)
7H5390    16.N.1    Bush -bracket -(dynamo, 1600 and 1600-MK-II)
7H5390    16.N.1    Bush -bracket (commutator end, dynamo, 1600 and 1600-MK-II)
7H5390    TC.N.1    Bush -bracket (commutator end, dynamo, Twin Cam)
7H5483    15.N.5    Light unit -left dip (headamp RHD)
7H5483    16.N.5    Light unit -(headlamp, road lamps, 1600 and 1600-MK-II)
7H5483    TC.N.5    Light unit -left dip (UK RHD) (2) -(headlamp, road lamps, Twin Cam)
7H5485    15.N.5    Light unit -vertical dip -change to 47H5124 Com.(C)58918
7H5485    TC.N.5    Light unit -vertical dip, European LHD -(headlamp, road lamps,
    electrical, Twin Cam) Fin.(C)823
7H5486    15.N.5    Light unit (France) -change to 47H5124 Com.(C)60340
7H5486    TC.N.6    Light unit (France LHD) -(road lamps, electrical, Twin Cam)-
    Fin.(C)1617
7H5522    16.N.4    Cover -(control box, switches, 1600 and 1600-MK-II)
7H5522    TC.N.4    Cover -(control box, switches, electrical, Twin Cam)
7H5529    15.N.2    Sleeve -screwed (with contol nut) -(starter, electrical, 1500)
7H5529    16.N.2    Sleeve -screwed (with contol nut) -(starter, 1600 and 1600-MK-II)
7H5529    TC.N.2    Sleeve -screwed (with contol nut) -(starter, Twin Cam)
7H5536    16.N.9    Interior -bulb holder (sidelamp) (2) -(road lamps, 1600 and
    1600-MK-II)
7H5536    TC.N.7    Interior -bulb holder (sidelamp) (2) -(road lamps, Twin Cam)-
    Com.(C)2193
7H5582    15.N.5    Sleeve -terminal (France) (6 for headlamp) -Fin.(C)60339
7H5582    15.N.5    Sleeve -terminal (not France) (6 for headlamp)
7H5582    15.N.5    Sleeve -terminal (for adapter with cable)) (6 for headlamp) -
    Com.(C)58918
7H5582    16.N.5    Sleeve -terminal (6) -(adapter, headlamp, 1600 and 1600-MK-II)-
    alternative 73H5271 (6 off)
7H5582    16.N.5    Sleeve -terminal (6) -(headlamp Sweden, road lamps, 1600 and
    1600-MK-II) Com.(C)72040 - -alternative 37H5271
7H5582    16.N.6    Sleeve -terminal (6) -(headlamp LHD Europe except France, road lamps,
    1600 and 1600-MK-II) -alternative 37H5271
7H5582    16.N.6    Sleeve -terminal (6) -(headlamp France, road lamps, 1600 and
    1600-MK-II) -alternative 37H5271
7H5582    16.N.7    Sleeve -terminal (6) -(headlamp, LHD except Europe, lamps, 1600 and
    1600-MK-II) -Fin.(C)105361 -alternative 37H5271
7H5582    16.N.7    Sleeve -terminal (6) -(headlamp, LHD except Europe, lamps, 1600 and
    1600-MK-II) -Com.(C)105362 -alternative 37H5271
7H5582    16.N.8    Sleeve -terminal (6) -(headlamp USA, LHD except Europe, road lamps,
    1600 and 1600-MK-II) -Com.(C)105362 -alternative 37H5271
7H5582    16.N.8    Sleeve -terminal (6) -(headlamp N. America, road lamps, 1600 and
    1600-MK-II -Com.(C)102857 USA, Com.(C)107031 Canada -alternative 37H5271
7H5582    16.N.11   Sleeve -terminal (4) -(lamp, number plate, Switzerland, road lamps,
    1600 and 1600-MK-II) Com.(C)92079
7H5582    TC.N.5    Sleeve -terminal (Europe LHD) (6) -(headlamp, road lamps, Twin Cam)-
    Fin.(C)823
7H5582    TC.N.6    Sleeve -terminal (France LHD) (6) -(headlamp, road lamps, Twin Cam)-
    Fin.(C)1617
7H5582    TC.N.6    Sleeve -terminal (France LHD) (6) -(headlamp, road lamps, Twin Cam)-
    Com.(C)1618
7H6255    15.J.2    Bush for upper end -felt (steering column) -(steering, 1500)
7H6255    16.J.2    Bush felt -upper end -(column, steering, 1600 and 1600-MK-II)
7H6255    TC.J.2    Bush -upper end (felt) -(column, steering, Twin Cam)
7H6838    16.N.5    Body assembly (2) -(headlamp, road lamps, 1600 and 1600-MK-II) -no
    longer available use component parts
7H6836    16.R.45   Motor and mounting plate -(motor and runner assy, heater assy, heater,
    1600 and 1600-MK-II)
7H6838    16.N.7    Body assembly (2) -(headlamp LHD except Europe, road lamps, 1600 and
    1600-MK-II) -Com.(C)105362
7H6887    16.N.2    Circlip -cup retaining -(starter, 1600 and 1600-MK-II)-
    Com.(E)16GC/H6435
7H7003    15.E.2    Piston -(slave cylinder, clutch, 1500)
7H7003    16.E.2    Piston -(slave cylinder, clutch, 1600)
7H7004    15.E.2    Cup for piston -(slave cylinder, clutch, 1500)
7H7004    16.E.2    Cup piston -(slave cylinder, clutch, 1600)
7H7022    15.M.2    Cup -(anti-return valve ass'y, master cylinder, 1500)
7H7022    16.M.3    Cup -valve -(anti-return valve ass'y, master cylinder, std.model 1600
    and 1600-MK-II) -changed to 17H7886 -use 17H7886 for this application
7H7036    16.H.4    Spring -shoe pull-off -(rear brakes, standared model, 1600 and
    1600-MK-II)
7H7355    15.H.4    Nut for abutment strip (4) (for brake shoes rear)
7H7355    16.H.4    Nut -abutment block to brake plate (4) -(rear drum brakes, 1600 and
    1600-MK-II) -changed to AJD8105N
7H7367    15.K.2    Washer for bolt (spring) -(4 for cylinders, front drum brakes)
7H7368    15.H.4    Washer for nut (spring) (4) (for rear brake abutment)
7H7368    16.H.4    Washer -spring -nut (4) (abutment to plate, rear drum brakes, 1600
    and 1600-MK-II) -changed to LWN305
7H7368    15.K.2    Washer for bolt (spring) -(4 for cylinders, front drum brakes)
7H7398    16.H.4    Rivet (48) -(rear brakes, standared model, 1600 and 1600-MK-II)
7H7456    15.E.2    Joint for banjo -(slave cylinder, clutch, 1500) -Fin.(C)11767
7H7456    15.M.2    Joint for banjo connection -(master cylinder clutch side, 1500)
7H7456    16.M.3    Joint -banjo bolt connection (lower) -(master cylinder, std.model 1600
    and 1600-MK-II) -was 3H549
7H7484    15.M.2    Washer -primary clip to piston (2) -(master cylinder, 1500)
7H7484    16.M.3    Washer -primary clip to piston (2) -(master cylinder, std.model, 1600
    and 1600-MK-II)
7H7485    15.M.2    Cup -primary -for piston (2) -(master cylinder, 1500)
7H7485    16.M.3    Cup -primary (2) -(master cylinder, std.model 1600 and 1600-MK-II)
7H7488    15.M.2    Body -(anti-return valve ass'y, master cylinder, 1500)
7H7489    16.M.3    Washer -valve -(anti-return valve ass'y, master cylinder, std.model
    1600 and 1600-MK-II)
7H7520    15.K.2    Bolt -cylinder to brake plate (1/4") -(4 for front drum brakes)
7H7560    15.E.2    Filler for piston cup -(slave cylinder, clutch, 1500)
7H7560    16.E.2    Filler -piston cup -(slave cylinder, clutch, 1600)
7H7636    15.K.2    Bolt -cylinder to brake plate (5/16") -(4 for front drum brakes)
7H7753    15.K.2    Ring -sealing -(4 for front wheel cylinders drum brakes)
7H7847    15.H.4    Bolt for banjo connection, rear brakes, 1500
7H7847    16.H.4    Bolt -banjo connection -(rear drum brakes, 1600 and 1600-MK-II)
7H7923    15.H.4    Cup -piston -(rubber fluid seal, rear drum brakes, 1600)
7H7923    16.H.4    Cup -piston -(rubber fluid seal, rear drum brakes, 1600 and
    1600-MK-II)
7H7924    15.K.2    Cup for piston -( 4 for front wheel cylinders drum brake, 7/8")
7H7925    15.M.2    Piston (2) -(master cylinder, 1500)
7H7925    16.M.3    Piston (2) -(master cylinder, std.model 1600 and 1600-MK-II)
7H7928    15.H.4    Piston -hydraulic -(rear drum brakes, 1500)
7H7928    16.H.4    Piston -hydraulic -(rear drum brakes, 1600 and 1600-MK-II)
7H7930    15.H.4    Mask -adjuster (2) -(rear drum brakes, 1500)
7H7930    15.K.2    Mask -adjuster (4) -(front drum brakes, 1500)
7H7930    16.H.4    Mask -adjuster (2) -(rear drum brakes, 1600 and 1600-MK-II)
7H7931    15.H.4    Adjuster (2) -(snail, rear drum brakes, 1500)
7H7931    16.H.4    Adjuster (2) -(snail, rear drum brakes, 1600 and 1600-MK-II)
7H7932    15.H.4    Abutment strip for brake shoe (2) -(rear drum brakes, 1500)
7H7932    16.H.4    Block -abutment (2) -(rear drum brakes, 1600 and 1600-MK-II)
7H7935    15.H.4    Spring -brake shoe tension (2) -(small, rear drum brakes, 1500)
7H7935    16.H.4    Spring -shoe tension (2) -(rear drum brakes, 1600 and 1600-MK-II)
7H7936    15.H.4    Spring -brake shoe pull-off (2) (large, rear drum brakes, 1500)
7H7936    15.K.2    Spring -brake-shoe pull-off (4) (front drum brakes, 1500)
7H7936    16.H.4    Spring -shoe pull-off (2) -(rear drum brakes, 1600 and 1600-MK-II)
7H7938    15.K.2    Filler for piston cup -(4 for front wheel cylinders drum brakes)
7H7939    15.H.4    Spring for filler -(4 for front wheel cylinders drum brakes)
7H7939    15.K.2    Spring -filler cup -(expander, rear drum brakes, 1500)
7H7939    16.H.4    Spring -filler -(expander, rear drum brakes, 1600 and 1600-MK-II)
7H7940    15.H.4    Filler -cup -(expander, rear drum brakes, 1500)
7H7940    16.H.4    Filler -cup -(expander, rear drum brakes, 1600 and 1600-MK-II)
7H7941    15.K.2    Piston and dust cover -(4 for front wheel cylinders drum brakes)
7H7942    15.H.4    Body (with abutment strip)(2) -(wheel cylinder, rear drum brakes,1500)
7H7942    16.H.4    Body (with abutment strip)(2) -(wheel cylinder, rear drum brakes, 1600
    and 1600-MK-II)
7H7943    15.H.4    Boot for wheel cylinder (2) -(rear drum brakes, 1500)
7H7943    16.H.4    Boot -hand brake lever (2) -(rear wheel cyl, 1600 and 1600-MK-II)
7H7947    15.K.2    Body -R/H -(2 for front wheel cylinders drum brakes)
7H7948    15.K.2    Body -L/H -(2 for front wheel cylinders drum brakes)
7H7949    15.K.2    Cylinder assembly -wheel -R/H -(2 for front drum brakes)
7H7950    15.K.2    Cylinder assembly -wheel -L/H -(2 for front drum brakes)
7H7954    15.E.2    Push rod) -(slave cylinder, clutch, 1500)
7H7954    16.E.2    Rod -push -(slave cylinder, clutch, 1600) -changed to 13H21-
    7H7954 not available use 13H21
7H7955    15.E.2    Body -(slave cylinder, clutch, 1500) -change to 7H7983 Com.(C)11768
7H7956    15.E.2    Clip for boot (large) -(slave cylinder, clutch, 1500)
7H7956    16.E.2    Clip -boot (large) -(slave cylinder, clutch, 1600)
7H7957    15.E.2    Boot -(slave cylinder, clutch, 1500)
7H7957    16.E.2    Boot -(slave cylinder, clutch, 1600)
7H7958    15.E.2    Clip for boot (small) -(slave cylinder, clutch, 1500)
7H7958    16.E.2    Clip -boot (small) -(slave cylinder, clutch, 1600)
7H7959    15.E.2    Spring for cup filler -(slave cylinder, clutch, 1500)
7H7959    16.E.2    Spring -cup filler -(slave cylinder, clutch, 1600)
7H7973    15.H.4    Piston (with dust cover) (rear wheel cylihder)
7H7974    15.E.2    Cylinder assembly -(clutch slave, 1500) -Com.(E)11768 -(was AH5457)
7H7974    16.E.2    Cylinder assembly -(clutch slave, 1600) -not available use BMK192 with
    rod 13H21
7H7981    15.K.2    Adjuster assembly -(4 for front drum brakes)
7H7983    15.E.2    Body -(slave cylinder, clutch, 1500) -Com.(C)11768 -(was 7H7955)
7H7983    16.E.2    Body -(slave cyl.assy, clutch assembly, 1600)
7H8200    TC.K.2    Cylinder assembly (4) -(cal.unit.assy, front axle+susp, Twin Cam)-
    changed to 7H8257 Com.(C)836 approx. -includes cylinder(4), pin retractor(4),
    retractor stop bush(4), spring washer(8), cap(4) -parts not supplied separately,
    included in assembly
7H8201    16.H.8    Pad assembly -friction (4) -(caliper assy, rear axle, ARDB model 1600
    and 1600-MK-II) -Com.(C)92104 -not available use 8G8903
7H8201    TC.H.3    Pad assembly -friction (4) -(caliper assy, rear axle, Twin Cam)
7H8201    TC.K.2    Pad assembly -friction (4) -(caliper assy, front axle, Twin Cam)
7H8202    16.H.8    Plate -support (4) -(pad, caliper assy, rear axle, ARDB model 1600
    and 1600-MK-II) -Com.(C)92104
7H8202    TC.H.3    Plate -support (4) -(caliper assy, rear axle, Twin Cam)
7H8202    TC.K.2    Plate -support (4) -(caliper assy, front axle, Twin Cam)
7H8203    16.H.8    Plate -keep (2) -(pad, caliper assy, rear axle, ARDB model 1600
    and 1600-MK-II) -Com.(C)92104
7H8203    TC.H.3    Plate -keep (2) -(caliper assy, rear axle, Twin Cam)
7H8203    TC.K.2    Plate -keep (2) -(caliper assy, front axle, Twin Cam)
7H8204    TC.H.3    Bolt for keep plate (2) -(caliper assy, rear axle, Twin Cam) -changed
    to HZS0407 Com.(C)836 approx.
7H8204    TC.K.2    Bolt for keep plate (2) -(caliper assy, front axle, Twin Cam) -changed
    to HZS0407 Com.(C)836 approx.
7H8205    TC.H.3    Pipe -bridge (R/H) -(caliper assy, rear axle, Twin Cam)  -changed to
    7H8254 Com,(C)836 approx.
7H8205    TC.K.2    Pipe -bridge (R/H) -(caliper assy, front axle, Twin Cam)  -changed to
    7H8210 Com.(C)836 approx
7H8206    16.H.8    Bolt -cylinder to caliper (16) -(caliper assy, rear axle, ARDB model
    1600 and 1600-MK-II) -Com.(C)92104
7H8206    TC.H.3    Bolt -cylinder to caliper (16) -(caliper assy, rear axle, Twin Cam)
7H8206    TC.K.2    Bolt -cylinder to caliper (16) -(caliper assy, front axle, Twin Cam)
7H8207    16.F.8    Washer -shakeproof -bolt (16) -(caliper assy, rear axle, ARDB model
    1600 and 1600-MK-II) -Com.(C)92104 -changed to LWN404
7H8207    TC.H.3    Washer for bolt (shakeproof) (16) -(caliper assy, rear axle, Twin Cam)
7H8207    TC.H.3    Washer for nut (shakeproof) (2) -(keep plate, caliper assy, rear axle,
    Twin Cam)
7H8207    TC.K.2    Washer for bolt (shakeproof) (16) -(caliper assy, front axle, Twin
    Cam)
7H8207    TC.K.2    Washer for nut (shakeproof) (2) -(keep plate, caliper assy, front
    axle, Twin Cam)
7H8208    TC.H.3    Pipe -bridge (L/H) -(caliper assy, rear axle, Twin Cam)  -changed to
    7H8254 Com,(C)836 approx.
7H8208    TC.K.2    Pipe -bridge (L/H) -(caliper assy, front axle, Twin Cam)  -changed to
    7H8221 Com.(C)836 approx
7H8209    TC.K.2    Piston assembly (4) -(cal.unit.assy, front axle+susp, Twin Cam)-
    Com.(C)836 approx. -includes Piston(4 not supplied separately), Piston seal(4) and
    Dust seal(4) not supplied separately items included in kit 8GH8194, Plate(4 not
    supplied separately), Bush 7H8212 (4), Screw pllate to piston AJD802 (8), Washer
    7H822 (8) -was 7H8211
7H8210    TC.K.2    Pipe -bridge (R/H) -(caliper assy, front axle, Twin Cam) Com.(C)836
    approx. -was 7H8205
7H8211    TC.K.2    Piston assembly (4) -(cal.unit.assy, front axle+susp, Twin Cam)-
    changed to 7H8209 Com.(C)836 approx. -includes Piston(4 not supplied separately),
    Piston seal(4) and Dust seal(4) not supplied separately items included in kit 8GH8194,
    Plate(4 not supplied separately), Bush 7H8212 (4), Screw pllate to piston AJD802 (8),
    Washer 7H822 (8)
7H8212    16.H.8    Bush -retractor (4) -(piston assy, rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)92104
7H8212    TC.K.2    Bush -retractor (4) -(piston assy, front axle, Twin Cam)
7H8215    TC.H.3    Caliper unit (R/H) -(disc brake, rear axle, Twin Cam) -changed to
    7H8258 Com.(C)836 approx.
7H8216    TC.H.3    Caliper assembly (4) -(disc brake, rear axle, Twin Cam) -changed to
    7H8253 Com.(C)836 approx. -incudes Cylinder (4), retractor pin( 4), retractor stop
    bush (4), spring washer (8), cap (4) -included parts not supplied separately
7H8217    TC.H.3    Caliper unit (L/H) -(disc brake, rear axle, Twin Cam) -changed to
    7H8259 Com.(C)836 approx.
7H8218    TC.H.3    Piston assembly -(disc brake, rear axle, Twin Cam) -changed to
    7H8260 Com.(C)836 approx. -includes plate, piston, piston seal and dust seal,
    restrictor bush, plate to piston screw, and shakeproof washer (parts not supplied
    separately) -piston seal and dust seal included in kit 8G8195
7H8221    TC.K.2    Pipe -bridge (L/H) -(caliper assy, front axle, Twin Cam) Com.(C)836
    approx -was 7H8208
7H8222    16.H.8    Washer -shakeproof -screw (8) -(piston assy, rear axle, ARDB model
    1600 and 1600-MK-II) -Com.(C)92104
7H8222    TC.H.3    Washer for screw (shakeproof) (8) -(piston assy, rear axle, Twin Cam)-
    Com.(C)836 approx.
7H8222    TC.K.2    Washer for screw (shakeproof) (8) -(piston assy, front axle, Twin Cam)
    -Com.(C)836 approx
7H8223    16.M.4    Cap -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8223    TC.M.2    Cap -(brake master cylinder, Twin Cam)
7H8224    16.M.4    Washer -cap -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8224    TC.M.2    Washer -cap -(brake master cylinder, Twin Cam)
7H8225    TC.M.2    Piston -(brake master cylinder, Twin Cam)
7H8226    16.M.4    Valve -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8226    TC.M.2    Valve -(brake master cylinder, Twin Cam)
7H8227    16.M.4    Spring support -rear end -(brake master cylinder, ARDB model 1600 and
    1600-MK-II)- Com.(C)91240
7H8227    TC.M.2    Spring support -rear end -(brake master cylinder, Twin Cam)
7H8228    TC.M.2    Spring support -front end -(brake master cylinder, Twin Cam)
7H8229    16.M.4    Spring -valve -(brake master cylinder, ARDB model 1600 and 1600-MK-II)
    -Com.(C)91240
7H8229    TC.M.2    Spring -valve -(brake master cylinder, Twin Cam)
7H8230    16.M.4    Spring -main -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8230    TC.M.2    Spring -main -(brake master cylinder, Twin Cam)
7H8231    16.M.4    Rod -push -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8231    TC.M.2    Push rod -(brake master cylinder, Twin Cam)
7H8232    TC.M.2    Washer -(for push rod, brake master cylinder, Twin Cam)
7H8233    16.M.4    Circlip -(for push rod, brake master cylinder, ARDB model 1600 and
    1600-MK-II) Com.(C)91240
7H8233    TC.M.2    Circlip -(for push rod, brake master cylinder, Twin Cam)
7H8234    TC.M.2    Grease for rubber -(brake master cylinder, Twin Cam)
7H8235    16.M.4    Gasket -cover -(brake master cylinder, ARDB model 1600 and
    1600-MK-II) Com.(C)91240
7H8235    TC.M.2    Gasket -cover -(brake master cylinder, Twin Cam)
7H8236    TC.M.2    Seal -piston -(brake master cylinder, Twin Cam)
7H8237    16.M.4    Dust excluder -(brake master cylinder, ARDB model 1600 and
    1600-MK-II) Com.(C)91240
7H8237    TC.M.2    Dust excluder -(brake master cylinder, Twin Cam)
7H8238    TC.M.2    Rubber seal and bush -(brake master cylinder, Twin Cam)
7H8239    16.H.8    Brake caliper -R/H -(rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)92104
7H8239    TC.H.4    Brake assembly -hand (R/H) -(rear axle, Twin Cam) -incudes Pad carrier
    assembly inner (R/H), Pad carrier assembly outer (R/H), (Not supplied separately,
    Items included in assembly), plus Pad friction (R/H inner), Pad friction (R/H outer),
    (Not supplied separately, Items included in kit 8G8197)
7H8240    16.H.8    Lever assembly -operating (2) -(brake, rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)92104
7H8240    TC.H.4    Lever assembly -operating (2) -(hand brake, rear axle, Twin Cam)
7H8241    16.H.8    Bolt -lever to carrier (2) -(brake, rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)92104
7H8241    TC.H.4    Bolt -lever to carrier (2) -(hand brake, rear axle, Twin Cam)
7H8242    16.H.8    Nut -self-locking (2) -(lever to carrier, rear axle, ARDB model 1600
    and 1600-MK-II) -Com.(C)92104 -changed to LNZ105
7H8242    TC.H.4    Nut -self locking (2) -(lever to carrier, hand brake, rear axle, Twin
    Cam)
7H8243    16.H.8    Washer -tab (2) -(brake, rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)92104LNZ105
7H8243    TC.H.4    Wsher -tab (2) -(lever to carrier, hand brake, rear axle, Twin Cam)
7H8244    16.H.8    Pin -clevis (2) -(brake, rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)92104
7H8244    TC.H.4    Pin -clevis (2) -(lever to carrier, hand brake, rear axle, Twin Cam)
7H8245    16.H.8    Bolt -pad carrier to caliper (4) -(brake, rear axle, ARDB model 1600
    and 1600-MK-II) -Com.(C)92104
7H8245    TC.H.4    Bolt -pad carrier to calliper unit (4) -(hand brake, rear axle, Twin
    Cam)
7H8246    16.H.8    Seat -pivot (2) -(brake, rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)92104
7H8246    TC.H.4    Seat -pivot (2) -(lever to carrier, hand brake, rear axle, Twin Cam)
7H8247    16.H.8    Brake caliper -L/H -(rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)92104
7H8247    TC.H.4    Brake assembly -hand (L/H) -(rear axle, Twin Cam) -incudes Pad carrier
    assembly inner (L/H), Pad carrier assembly outer (L/H), (Not supplied separately,
    Items included in assembly), plus Pad friction (L/H inner), Pad friction (L/H outer),
    (Not supplied separately, Items included in kit 8G8197)
7H8250    16.H.8    Rivet -bifurcated -short (4) -(brake, rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)92104 -changed to BRP614
7H8250    TC.H.4    Rivet -bifurcated -short (4) -(brake, rear axle, Twin Cam) -included
    in 7H8239, 7H8247, and all pad carrier assemblies
7H8251    16.H.8    Rivet -bifurcated -long (4) -(brake, rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)92104 -changed to BRP616
7H8251    TC.H.4    Rivet -bifurcated -long (4) -(brake, rear axle, Twin Cam) -included in
    7H8239, 7H8247, and all pad carrier assemblies 
7H8252    16.H.8    Screw -bleed (2) -(caliper assy, rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)92104
7H8252    TC.H.3    Screw -bleed (2) -(caliper assy, rear axle, Twin Cam)
7H8252    TC.K.2    Screw -bleed (2) -(caliper assy, fron axle, Twin Cam)
7H8253    16.H.8    Cylinder assembly (4) -(rear axle, ARDB model 1600 and 1600-MK-II)-
     Com.(C)92104
7H8253    TC.H.3    Cylinder assembly (4) -(rear axle, Twin Cam) -Com.(C)836 approx. -was
    7H8216  -incudes Cylinder (4), retractor pin( 4), retractor stop bush (4), spring
    washer (8), cap (4) -included parts not supplied separately
7H8254    16.H.8    Pipe -bridge -R/H -(caliper, rear axle, ARDB model 1600 and
    1600-MK-II) Com.(C)92104
7H8254    TC.H.3    Pipe -bridge (R/H) -(caliper assy, rear axle, Twin Cam)-
    Com.(C)836 approx. -was 7H8205
7H8255    16.H.8    Pipe -bridge -L/H -(caliper, rear axle, ARDB model 1600 and
    1600-MK-II) Com.(C)92104
7H8255    TC.H.3    Pipe -bridge (L/H) -(caliper assy, rear axle, Twin Cam)-
    Com.(C)92104 -was 7H8208
7H8257    TC.K.2    Cylinder assembly (4) -(cal.unit.assy, front axle+susp, Twin Cam)-
    Com.(C)836 approx. -was 7H8200 -includes cylinder(4), pin retractor(4), retractor stop
    bush(4), spring washer(8), cap(4) -parts not supplied separately, included in assembly
7H8258    16.H.8    Caliper unit assembly -R/H -(rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240
7H8258    TC.H.3    Caliper unit (R/H) -(rear axle, Twin Cam) -Com.(C)836 approx. -was
    7H8215
7H8259    16.H.8    Caliper unit assembly -L/H -(rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240
7H8259    TC.H.3    Caliper unit (L/H) -(rear axle, Twin Cam) -Com.(C)836 approx. -was
    7H8217
7H8260    16.H.8    Piston assembly (4) -(rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)92104
7H8260    TC.H.3    Piston assembly -(disc brake, rear axle, Twin Cam) Com.(C)836 approx.
    -was 7H8218 -includes plate, piston, piston seal and dust seal, restrictor bush, plate
    to piston screw, and shakeproof washer (parts not supplied separately) -piston seal
    and dust seal included in kit 8G8195
7H8261    TC.K.2    Cliper (R/H) -(cal.unit.assy R/H, front.axle+susp, Twin Cam)
7H8261    TC.K.2    Cliper (L/H) -(cal.unit.assy L/H, front.axle+susp, Twin Cam) 
7H8262    16.H.8    Caliper -L/H -(rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8262    TC.H.3    Caliper -L/H -(rear axle, Twin Cam)
7H8263    16.H.8    Caliper -R/H -(rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8263    TC.H.3    Caliper -R/H -(rear axle, Twin Cam)
7H8264    16.M.4    Piston -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8265    16.M.4    Spring support -front end -(brake master cylinder, ARDB model 1600
    and 1600-MK-II)- Com.(C)91240
7H8267    16.M.4    Seal -piston -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8269    16.M.4    Seal -static -(brake master cylinder, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
7H8338    16.M.5    Gasket -body (2) -(headlight, road lamps, 1600 and 1600-MK-II)-
    Com.(C)105362 -was 3H4031 -7H8338 correction was 7H8358
7H8338    16.M.7    Gasket -body (2) -(headlamp LHD except Europe, road lamps, 1600 and
    1600-MK-II) -Com.(C)105362
7H9380    16.N.3    Lock and key -ignition switch -(switches, 1600 and 1600-MK-II)-
    changed to 2H4185 -not available use 24G1345
7H9776    15.R.13   Control assembly with tubes -(windscreen washer kit, optional) -
    (see also 17H9749, 27H9624)
7H9777    15.R.13   Jet mounting assembly (2) -(windscreen washer kit optional) -
    (see also 17H9746, 27H9622, 27H9623)
7H9778        16.H.4    Piston with dust cover (2) -(wheel cylinder, rear drum brakes,
    1600 and 1600-MK-II)
7H9779    15.R.13   Container -(bracket and container, windscreen washer kit optional)
7H9779    16.R.13   Container -20 oz. (1-1/2" neck) -(windscreen washer kit, windscreen
    washer, 1600 and 1600-MK-II) -Fin.(C)80389 -not available use 13H277 with 37H9716
7H9779    TC.R.12   Container -20 oz. (1-1/2" neck) -(windscreen washer kit, Twin Cam)-
    (optional extra) -Fin.(C)2544 -7H9779 and 7H9785 no longer available use 13H227 with
    37H9716
7H9780    15.R.13   Nut -plunger -(control assembly with tubes) -(w/s washer kit, opt.)
7H9781    15.R.13   Bracket -(bracket and container, windscreen washer kit optional)
7H9781    16.R.13   Bracket -(windscreen washer kit, windscreen washer, 1600 and
7H9781    TC.R.12   Bracket -(windscreen washer kit, windscreen washer, Twin Cam)-
    (optional extra)
7H9782    15.R.13   Washer (shakeproof) -(control ass'y with tubes) -(w/s washer kit,opt.)
7H9782    TC.R.12   Washer (shakeproof) -(control ass'y, windscreen washer kit, windscreen
    washer, Twin Cam)
7H9783    15.R.13   Push-button knob -(control ass'y with tubes) -(w/s washer kit, opt.)
7H9784    15.R.13   Collar -knurled -(control ass'y with tubes) -(w/s washer kit, opt.)
7H9785    15.R.13   Cap -(bracket and container, windscreen washer kit optional)
7H9785    16.R.13   Cap assembly (1-1/2" neck) -(windscreen washer kit, windscreen
    washer, 1600 and 1600-MK-II) -Fin.(C)80389 -not available use 13H277 with 37H9716
7H9785    TC.R.12   Cap assembly (1-1/2" neck) -(windscreen washer kit, Twin Cam)-
    -Fin.(C)2544 -7H9779 and 7H9785 no longer available use 13H227 with 37H9716
7H9786    15.R.13   Tubing (state length)-(control ass'y with tubes) -(w/s washer kit,opt)
7H9827    15.R.1    Dzus fastener (5) -(panel ass'y, battery cover, body, 1500 T)
7H9827    15.R.5    Dzus fastener (5) -(panel ass'y, battery cover, body, 1500 C)
7H9827    16.R.1    Dzus fastener (2) -(panel ass'y, battery cover, tonneau assy, body
    shell, 1600 and 1600-MK-II Tourer) Com.(C)78249 -was AFH1663
7H9827    16.R.5    Dzus fastener (2) -(panel ass'y, battery cover, tonneau assy, body
    shell, 1600 and 1600-MK-II Coupe)
7H9827    TC.O.3    Dzus fastener (2) -(panel ass'y, battery cover, tonneau assy, body
    shell, Tourer, Twin Cam)
7H9827    TC.R.3    Dzus fastener (2) -(panel ass'y, battery cover, tonneau assy, body
    shell, Tourer, Twin Cam)
7H9827    TC.R.6    Dzus fastener (2) -(panel ass'y, battery cover, tonneau assy, body
    shell, Coupe, Twin Cam)
7H9828    15.R.1    Dzus spring (5) -(floor ass'y boot, tonneau.ass'y, body shell, 1500 T)
7H9828    15.R.5    Dzus spring (5) -(floor ass'y boot, tonneau.ass'y, body shell, 1500 T)
7H9828    15.R.5    Dzus spring (5) -(floor ass'y boot, tonneau.ass'y, body shell, 1500 C)
7H9828    16.R.1    Dzus spring (2) -(floor ass'y boot, tonneau.ass'y, body shell, 1600
    and 1600-MK-II Tourer)
7H9828    16.R.5    Dzus spring (2) -(floor ass'y boot, tonneau sub-assy, tonneau assy,
    body shell, 1600 and 1600-MK-II Coupe)
7H9828    TC.R.3    Dzus spring (2) -(floor ass'y trunk, tonneau sub-assy, tonneau assy,
    body shell, Tourer, Twin Cam)
7H9828    TC.R.6    Dzus spring (2) -(floor ass'y trunk, tonneau sub-assy, tonneau assy,
    body shell, Tourer, Twin Cam)
7H9830    15.N.3    Lock and key -ignition switch -(switches, electrical, 1500)
7H9830    TC.N.3    Lock and key -ignition switch -(switches, electrical, Twin Cam)
7H9832    15.R.41   Cable fixing blind to chain -(radiator blind, sundries 1500)
7H9832    16.R.44   Cable -blind to chain -(radiator blind, sundries, 1600 and 1600-MK-II)
7H9833    15.R.41   Ball chain with knob -(radiator blind, sundries 1500)
7H9833    16.R.44   Ball chain with knob -(radiator blind, sundries, 1600 and 1600-MK-II)
7H9834    15.R.41   Roller and blind -(radiator blind, sundries 1500)
7H9834    16.R.44   Roller and blind -(radiator blind, sundries, 1600 and 1600-MK-II)
7H9864    16.A.31   Durable dot button -(carpet flap snap, trimming, 1600 and 1600-MK-II
    Tourer)
7H9864    16.A.36   Button -Durable-dot -(carpet flap snap, trimming, 1600 and 1600-MK-II
    Coupe)
7H9864    TC.R.41   Button -Durable-dot -(carpet flap snap, trimming, Tourer, Twin Cam)
7H9864    TC.R.46   Button -Durable-dot -(carpet flap snap, trimming, Coupe, Twin Cam)
7H9866    15.R.33   Durable dot socket -carpet -tunnel -(trimming, 1500 Tourer)
7H9866    15.R.37   Durable dot socket -carpet -tunnel -(trimming, 1500 Coupe)
7H9866    16.A.31   Durable dot socket -(carpet flap snap, trimming, 1600 and 1600-MK-II
    Tourer)
7H9866    16.A.36   Socket -Durable-dot -(carpet flap snap, trimming, 1600 and 1600-MK-II
    Coupe)
7H9866    TC.R.41   Socket -Durable-dot -(carpet flap snap, trimming, Tourer, Twin Cam)
7H9866    TC.R.46   Socket -Durable-dot -(carpet flap snap, trimming, Coupe, Twin Cam)
7H9867    15.R.33   Durable dot stud  - carpet -tunnel -(trimming, 1500 Tourer)
7H9867    15.R.37   Durable dot stud  - carpet -tunnel -(trimming, 1500 Coupe)
7H9867    16.A.33   Durable dot stud  - carpet flap snap -(trimming, 1600 and 1600-MK-II
    Tourer) -changed to ADB4811
7H9867    16.R.36   Stud -Durable-dot -(carpet flap snap, trimming, 1600 and 1600-MK-II
    Coupe) -changed to ADB4811
7H9867    TC.R.41   Stud -Durable-dot -(carpet flap snap, trimming, Tourer, Twin Cam)
7H9867    TC.R.46   Stud -Durable-dot -(carpet flap snap, trimming, Coupe, Twin Cam)
7H9868    15.R.33   Durable dot eyelet -carpet -tunnel -(trimming, 1500 Tourer)
7H9868    15.R.39   Durable dot eyelet -carpet -tunnel -(trimming, 1500 Coupe)
7H9868    16.A.33   Eyelet- Durable dot -(carpet flap snap, trimming, 1600 and 1600-MK-II
    Tourer)
7H9868    16.A.36   Eyelet -Durable dot -(carpet flap snap, trimming, Tourer, Twin Cam)
7H9868    TC.R.46   Eyelet -Durable-dot -(carpet flap snap, trimming, Coupe, Twin Cam)
7H9958    15.R.14   Cable -operating -(lock assembly) -(door fittings, 1500 Tourer)
7H9958    16.R.14   Cable -operating -(lock assembly) -(door fittings, 1600 and 1600-MK-II
    Tourer)
7H9958    TC.R.13   Cable -operating (2) -(lock assy, door fittings, Tourer, Twin Cam)
7H9960    15.R.31   Plate for pronged clinch (1) -(for stowage bag, trimming, 1500 T)
7H9960    16.R.31   Plate, -pronged clinch (1) -(for stowage bag, trimming, 1600 and
    1600-MK-II Tourer) -changed to LFP1500
7H9961    15.R.31   Lift-the-dot fastener (7) -(for stowage bag, trimming, 1500 Tourer)
7H9961    15.R.38   Lift-the-dot fastener (6) -(for hood to body, trimming, 1500 Tourer)
7H9961    15.R.38   Lift-the-dot fastener (20/12) -(for tonneau cover, 1500 Tourer)-
	Quantities reduced at (C)65332(RHD), (C)60637(LHD)
7H9961    16.R.37   Lift-the-dot fastener (6) -(hood8, 1600 and 1600-MK-II Tourer)-
    changed to LFS107
7H9961    16.R.38   Lift-the-dot fastener (12) -(tonneau cover, 1600 and 1600-MK-II
    Tourer) -changed to LFS107
7H9962    15.R.33   Lift-the-dot fastener -carpets (16) -(trimming, 1500 Tourer)
7H9962    15.R.37   Lift-the-dot fastener -carpets (16) -(trimming, 1500 Coupe)
7H9962    16.R.33   Fastener -lift-the-dot (16) -trimming, 1600 and 1600-MK-II Tourer)-
    changed to LFS109
7H9962    16.R.36   Fastener -lift-the-dot (16) -(trimming, 1600 and 1600-MK-II Coupe)-
    changed to LFS109
7H9962    TC.R.41   Fastener -lift-the-dot (16) -(carpet, trimming, Tourer, Twin Cam)
7H9962    TC.R.46   Fastener -lift-the-dot (16) -(carpet, trimming, Coupe, Twin Cam)
7H9963    15.R.31   Lift-the-dot clinch plate (7) -(for stowage bag, trimming, 1500 T)
7H9963    15.R.33   Lift-the-dot clinch plate -carpets (16) -(trimming, 1500 Tourer)
7H9963    15.R.37   Lift-the-dot clinch plate -carpets (16) -(trimming, 1500 Coupe)
7H9963    15.R.38   Lift-the-dot clinch plate (6) -(for hood to body, trimming, 1500 T)
7H9963    15.R.38   Lift-the-dot clinch plate (20/12) -(for tonneau cover, 1500 Tourer)-
    Quantities reduced at (C)65332(RHD), (C)60637(LHD)
7H9963    16.R.31   Plate -clinch (7) -(lift-the-dot, stowage assy sidescreen, trimming,
    1600 and 1600-MK-II Tourer) -changed to LFS100
7H9963    16.R.33   Clinch plate -fastener (16) -(lift-the-dot, carpet-rear, trimming,
    1600 and 1600-MK-II Tourer) -changed to LFS100
7H9963    16.R.37   Lift-the-dot clinch plate (6) -(hood, 1600 and 1600-MK-II -changed
    to LFS100
7H9963    16.R.38   Lift-the-dot clinch plate (12) -(tonneau cover, 1600 and 1600-MK-II-
    changed to LFS100
7H9963    TC.R.41   Plate -clinch (16) -(Lift-the-dot, carpet, trimming, Tourer, Twin Cam)
    -changed to 2H5004
7H9963    TC.R.46   Plate -clinch (16) -(Lift-the-dot, carpet, trimming, Coupe, Twin Cam)-
    was 7H9963
HomeBackTopNext
Thank you for your comments --Send e-mail to <Barney Gaylord>
© 2020-2022 Barney Gaylord --Copyrigh