The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 6K
PART NO.  SPL.PAGE  DESCRIPTION                                                           
6K26      15.A.4    Washer for bolt (lock tab) (3) -(flywheel to crankshaft)
6K26      sup.3     Washer -locking -bolt (3) -(flywheel to crankshaft, engine unit, sup)
6K26      16.A.3    Washer -lock -bolt (3) -(flywheel to crankshaft, engine unit, 1600)
6K26      16.A.25   Washer -lock -bolt (3) -(flywheel to crankshaft, engine unit, 1622)
6K26      TC.A.5    Washer for bolt -lock (6) -(flywheel to crankshaft, engine, Twin Cam)
6K49      15.A.11   Key for pulley (water pump) [Fin(E)GB39864ex39401-39525]
6K287     15.H.1    Bearing for bevel pinion -rear (differential, rear axle, 1500)
6K287     16.H.2    Bearing -pinion -inner -(differential, rear axle, 1600 and 1600-MK-II)
6K287     16.H.6    Bearing -pinion -inner -(differential, rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240
6K287     TC.H.2    Bearing -pinion (inner) -(differential, rear axle, Twin Cam)
6K368     15.A.8    Washer for union (oil pressure gauge pipe)
6K431     TC.A.13   Washer for plug -copper -(sump, engine, Twin Cam)
6K499     15.F.1    Plug -drain (gearbox) -(rear axle, 1500) -Change to 2K5380-
    Com.(E)GD101 (late 1500)
6K499     15.H.1    Plug -oil -drain and filler (2) -(rear axle, 1500)
6K499     16.H.1    Plug -drain -(rear axle, 1600 and 1600-MK-II)
6K499     16.H.1    Plug -filler -(rear axle, 1600 and 1600-MK-II)
6K499     16.H.5    Plug -drain -(rear axle, AWDB model, 1600 and 1600-MK-II) Com.(C)91240
6K499     16.H.5    Plug -filler-(rear axle, AWDB model, 1600 and 1600-MK-II) Com.(C)91240
6K499     TC.A.11   Plug for core hole -screwed (5) -(chwvga, cyl.head, engine, Twin Cam)
6K499     TC.F.1    Plug -drain) -(gbx.casing, gearbox assy, Twin Cam)
6K499     TC.H.1    Plug -drain) -(rear axle, Twin Cam)
6K499     TC.H.1    Plug -filler) -(rear axle, Twin Cam)
6K500     TC.A.13   Washer for banjo bolt (4) -(oil feed, oil.pump, engine, Twin Cam)
6K501     15.A.10   Joint washer for adapter (repl by 1H898)
6K501     15.A.10   Washer for screw [Com(E)GB11298]
6K501     15.A.10   Washer for screw (inner) [Com(E)GB45501]
6K501     sup.10    Washer -joint adapter -(oil filter, engine unit, sup)
6K501     sup.10    Washer -screw -inner -(oil filter, engine unit, sup)
6K501     16.A.10   Joint washer -adapter -(oil filter, engine unit, 1600)
6K501     16.A.30   Joint washer -adapter -(oil filter, engine unit, 1622)
6K501     16.A.30   Washer -screw (inner) -(oil filter, engine unit, 1622)
6K501     TC.A.14   Joint for adapter (copper) -(oil.filter, engine, Twin Cam)
6K501     TC.A.14   Washer for screw -inner -(copper) -(oil.filter, engine, Twin Cam)
6K503     15.H.1    Washer -packing -for bearing .006" (.152mm)(A/R (differential, rear
    axle, 1500)
6K503     16.H.1    Washer -bearing packing .006" (.152mm)(A/R) -(differential, rear axle,
    1600 and 1600-MK-II)
6K503     16.H.5    Washer -bearing packing .006" (.152mm)(A/R) -(differential, rear axle,
    ARDB model 1600 and 1600-MK-II) -Com.(C)91240
6K503     TC.F.1    Washer -bearing packing .006" (.152mm)(A/R) -(differential, rear axle,
    Twin Cam)
6K528     15.F.3    Bearing -rear for 3rd motion shaft -(gearbox, late 1500)
6K528     16.F.2    Bearing -rear -3rd motion shaft -(gearbox, 1600 and 1600-MK-II)
6K528     TC.F.3    Bearing -shaft rear -(gearbox, Twin Cam)
6K529     15.F.1    Bearing -rear extension(gearbox) -Com.(E)GD101 (high starter 1500 on)
6K529     16.F.1    Bearing -rear extension -(gearbox assy, 1600 and 1600-MK-II)
6K529     TC.F.1    Bearing -rear extension -(gearbox assembly, Twin Cam)
6K629     15.A.3    Nut for camshaft gear -(engine unit, 1500)
6K629     sup.3     Nut -gear -(camshaft, engine unit, sup)
6K629     16.A.3    Nut -camshaft gear -(engine unit, 1600)
6K629     16.A.24   Nut -camshaft gear -(engine unit, 1622)
6K638     15.A.1    Washer for plug -(transverse oil hole)
6K638     15.A.8    Washer for union -(copper seal, oil signal union, 1500)
6K638     15.A.10   Washer for plug (drain -oil reservoir)
6K638     sup.1     Washer -(block assy, engine unit, sup)
6K638     sup.9     Washer -plug -(oil reservoir, engine unit, sup)
6K638     16.A.1    Washer -screwed plug -(engine unit, 1600)
6K638     16.A.8    Washer -union -(oil gauge signal, engine unit, 1600)
6K638     16.A.8    Washer -drain plug -(oil reservoir, engine unit, 1600)
6K638     16.A.21   Washer -screwed plug -(cyl.block, engine unit, 1622)
6K638     16.A.29   Washer -union -(oil pressure, engine unit, 1622)
6K638     16.A.30   Washer -drain plug -(oil reservoir, engine unit, 1622)
6K638     TC.A.1    Washer for plug -(screwed oil hole, cyl.block assy, engine, Twin Cam)
6K639     15.A.10   Screw with captive washer -reservoir to crankcase
6K639     16.A.8    Screw with captive washer -reservoir to crankcase (19) -(engine, 1600)
6K639     16.A.30   Screw with captive washer -reservoir to crankcase (19) -(engine,
    1622) -not available, use HZS0404 with LWZ404
6K648     TC.A.6    Washer for bolt (8) -(connecting rods, engine, Twin Cam) Com.(E)1343-
    was 6K881
6K649     15.B.2    Olive (1/2) -(vacuum pipe, 1500) -quantity increased at (E)BG11301
6K649     15.B.3    Olive - carburetor end -(ign.ctrl.pipe, vacuum control, 1600)
6K649     16.B.3    Olive - distributor end -(ign.ctrl.pipe, vacuum control, 1600)
6K649     TC.A.8    Olive -(pipe assembly -oil feed, adjuster, chain, camshaft, engine,
    Twin Cam)
6K649     TC.B.2    Olive (2) -(ign.ctrl.pipe vacuum control, ignition, engine, Twin Cam)-
    Fin.(E)2222 -no longer required see service memorandum MG/301
6K650     15.B.2    Tube nut -(dist.end, vacuum pipe, 1500)
6K650     16.B.3    Nut -distributor end -(ign.ctrl.pipe, vacuum control, 1600)
6K650     TC.B.2    Nut -distributor end -(ign.ctrl.pipe, vac.control, ignition, Twin Cam)-
    Fin.(E)2222 -no longer required see service memorandum MG/301
6K705     TC.A.15   Washer for plug -fibre -(scroll, water.pump, engine, Twin Cam)
6K817     15.A.5    Spring -rocker spacing
6K842     15.H.1    Peg for pin locating -(differential, rear axle, 1500)
6K842     16.H.1    Peg -pinion pin -(differential, rear axle, 1600 and 1600-MK-II)
6K842     16.H.5    Peg -pinion pin -(differential, -rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240
6K842     TC.H.1    Peg for -pinion pin -(differential, rear axle, Twin Cam)
6K871     15.A.5    Spring -rocker spacing (3) -(shaft ass'y, cyl.head, engine unit, 1500)
6K871     sup.6     Spring -rocker spacing (3) -(shaft ass'y, cyl.head, engine unit, sup)
6K871     16.A.5    Spring -rocker spacing (3) -(shaft ass'y, cyl.head, engine unit, 1600)
6K871     16.A.26   Spring -rocker spacing (3) -(shaft ass'y, cyl.head, engine unit, 1622)
6K872     15.A.5    Plug for oil hole (rear of head) -(engine, 1500)
6K872     sup.5     Plug -oil hole -(rear of head, engine unit, sup)
6K872     16.A.5    Plug -oil hole -(rear of head, engine unit, 1600)
6K872     16.A.26   Plug -oil hole -(rear of head, engine unit, 1622)
6K873     sup.5     Spring -valve -outer (8) -(engine unit, sup)
6K873     16.A.5    Spring -valve (outer) (8) -(cyl.head, engine unit, 1600)-
    Com.(E)16GA/H31640 -(was 1H722) -For 1H722 use 6K873 for this appliction
6K873     16.A.26   Spring -valve (outer) (8) -(cyl.head, engine unit, 1622)
6K874     15.A.1    Plug -crankcase oil hole (taper) -(engine, 1500)
6K874     sup.1     Plug -taper -oil gallerry (2) -(engine unit)
6K874     16.A.1    Plug -taper -crankcase oil hole (2) -(engine, 1600)
6K874     16.A.21   Plug -taper -crankcase oil hole (2) -(engine, 1622)
6K874     TC.A.1    Plug for crankcase oil hole (taper) (2) -(cyl.block assy, engine, Twin
    Cam)
6K875     15.H.1    Washer -lock -for crown wheel bolt (4) (differential)
6K875     16.H.2    Washer -lock -bolt (4) (crown wheel, differential, rear axle, 1600
    and 1600-MK-II)
6K875     16.H.6    Washer -lock -bolt (4) (crown wheel, differential, rear axle, ARDB
    model 1600 and 1600-MK-II) -Com.(C)91240
6K875     TC.H.2    Washer for bolt -lock (4) (crown wheel, differential, rear axle, Twin
    Cam)
6K878     15.A.5    Plug -valve rocker shaft (plain) -(cyl.head, engine unit, 1500)
6K878     sup.6     Plug -shaft -(valve rocker, cyl.head, engine unit, sup)
6K878     16.A.5    Plug -valve rocker (plain) -(cyl.head, engine unit, 1600)
6K878     16.A.26   Plug -valve rocker (plain) -(cyl.head, engine unit, 1622)
6K881     15.A.3    Washer for screw (lock)(8) -(connecting rods, engine unit, 1500)
6K881     16.A.3    Washer -lock -screw (8) -(connecting rods, engine unit, 1600)
6K881     sup.3     Washer -locking -screw (4) -(connecting rods, engine unit, sup)
6K881     16.A.24   Washer -lock -screw (4) -(connecting rods, engine unit, 1622)
6K881     TC.A.6    Washer for bolt (4) -(tab, con-rods, engine, Twin Cam) -changed to
    AEH648 Com.(E)1343
6K884     15.F.4    Spring for synchronizer ball (spring detents. 1st speed)
6K884     16.F.3    Spring -synchronizer ball (spring detents, 1st speed, gearbox, 1600
    and 1600-MK-II)
6K884     16.F.3    Spring -synchronizer ball (spring detents, 3rd and 4th speed, gearbox,
    1600 and 1600-MK-II)
6K884     TC.F.4    Spring -ball -(synchronizer, 1st speed, gearbox, Twin Cam)
6K884     TC.F.4    Spring -ball -(synchronizer, 3rd-4th, gearbox, Twin Cam)
6K885     15.F.3    Bearing -ball for shaft -(1st motion shaft, gearbox assy, 1500)-
    changed to 97H512 Com.(G)A1861, Fin.(G)MA8010 -changed to 6K885 Com.(G)MA8011- 
    (changed back to first number)
6K885     16.F.1    Bearing -(1st motion shaft, gearbox assy, 1600 and 1600-MK-II)
6K885     TC.F.3    Bearing -shaft front -(1st motion, gearbox, Twin Cam)
6K886     15.F.3    Spring ring for bearing -(1st motion shaft, gearbox assy, 1500)
6K886     16.F.1    Spring ring -bearing -(1st motion shaft, gearbox assy, 1600 and
    1600-MK-II)
6K886     TC.F.3    Spring ring -bearing -(1st motion, gearbox, Twin Cam)
6K892     15.F.3    Rollers -needle -shaft (18) (input to 3rd motion shaft spigot)
6K892     16.F.2    Needle roller -1st motion shaft (18) -(gearbox, 1600 and 1600-MK-II)-
    changed to 8G2404
6K892     16.F.3    Roller needle (18) -(1st motion, gearbox, Twin Cam)
6K899     15.A.1    Plug -oil relief valve vent holes
6K899     sup.1     Plug -oil relief valve vent hole (2) -(engine unit, sup)
6K899     16.A.1    Plug -oil relief valve vent hole (2) -(engine unit, 1600)
6K899     16.A.21   Plug -oil relief valve vent hole (2) -(engine unit, 1622)
6K899     TC.A.1    Plug for oil relief valve hole (2) -(cyl.block assy, engine, Twin Cam)
6K907     15.F.3    Shim for bearing (0.002" thick)(A/R) -(1st motion shaft, gearbox,
    1500)
6K907     16.F.2    Shim -1st motion shaft -0.002" (A/R) -(gearbox, 1600 and 1600-MK-II)
6K907     TC.F.3    Shim -bearing (A/R) -(0.002", 1st motion bearing, gearbox, Twin Cam)
6K908     15.F.3    Shim for bearing (0.004" thick) (gearbox input) -461-290
6K908     16.F.2    Shim -1st motion shaft -0.004" (A/R) -(gearbox, 1600 and 1600-MK-II)
6K908     TC.F.3    Shim -bearing (A/R) -(0.004", 1st motion bearing, gearbox, Twin Cam)
6K4973    TC.A.9    Joint for oil feed pipe pillar -(adjuster, chain, camshaft, engine,
    Twin Cam)
6K9012    15.F.2    Washer for countersunk screw (shakeproof)(3)
6K9012    16.F.1    Washer -shakeproof -countersunk screw (3) -(GB assy, 1600 and
    1600-MK-II)
6K9012    TC.F.1    Washer for screw (shakeproof) (3) -(countersunk, side cover, gearbox
    assembly, Twin Cam)
6K9714    TC.J.2    Rivet for shim (4) -(rack to brackets, steering, Twin Cam)
6K9777    16.R.39   Cap -nut -bracket to inner strut screw (2) -(alloy hard top, optional
    extra, 1600 and 1600-MK-II Tourer) -was AJJ3125
HomeBackTopNext
Thank you for your comments --Send e-mail to <Barney Gaylord>
© 2020, 2024 Barney Gaylord --Copyright and reprint information