MGA Seat Belts - LAP BELTS #3, Retrofit -- INT-121B
This idea comes from David Lake in Gold Coast, Queensland, AU
Here is a photo of the tabs welded to the chassis. For the outboard attachment we ran a sleeved bolt through the chassis within a welded tube to stop the chassis compressing when we tightened the bolt.
This is much easier done when the body is not on the chassis, but still possible.
Here is a photo of the tabs welded to the chassis. For the outboard attachment we ran a sleeved bolt through the chassis within a welded tube to stop the chassis compressing when we tightened the bolt.
This is much easier done when the body is not on the chassis, but still possible.