The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - AHH5634
PART NO.  SPL.PAGE  DESCRIPTION                                                           
AHH5634   15.H.4    Banjo connection -(rear drum brakes, 1500) -Com.(C)27989 (disc
    wheels), (C)28540 (wire wheels) -(was 27H7164)

Rear wheel banjo fitting, right angle There rear brake banjo fittings changed from straight to right angle commencing (C)27989 (disc wheels), (C)28540 (wire wheels). The earlier straight fitting was part number 27H7164.

Earlier threads on the input side (brake pipe fitting) were 3/8-BSF. Later input threads (this fitting) are 3/8-24-UNF, and they are not interchangeable. Threads on the output side are always 3/8-24-UNF (for the bleed fitting).

Install with:
7H7847 Bolt for banjo connection, MGA rear brakes, 1500, 1600, 1600-Mk-II
3H550  WASHER, copper (large) - 324-720
3H2287 WASHER, copper (small) - 324-730 -- or - 324-547 WASHER, copper (thick, alternate)
3H2428 Screw, bleeder (3/8-24-UNF thread) 
Rear wheel banjo fitting, right side


Also see 27H7164.htm for earlier issue straight banjo fitting.

And, HT112.htm for more information for both styles of banjo fitting and the connecting pipes.

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2021, 2023 Barney Gaylord -- Copyright and reprint information