The MGA With An Attitude
Cold Air Intake Assembly - CB-303
For Pushrod engine or Twin Can engine.
Cool air box on a pushrod engine (above)
Cool air box for a TwinCam engine (below)
These photos supplied by Ralph Zbarsky with the following notes:
Here is a photo of another of my cold air box masterpiece creations on a
pushrod engine (above). The primary purpose now is to keep the driver's mitts
from playing with the carbs.
The filter sits behind the grille, and the box is in 2 parts. It was the biggest box I could stuff in
without whacking the fender sheetmetal.
|
