PART NO. SPL.PAGE DESCRIPTION
HNS0404 sup.6 Screw -blanking plate (2) -(htr.blk.plt, cyl.head, engine unit, sup)
HNS0405 TC.A.6 Screw -plate to bearing cap (2) -(front.eng.plate, engine, Twin Cam)
HNS0406 15.A.3 Screw -locating cam plate to crankcase
HNS0406 15.A.8 Bolt -oil strainer to pump [Com(E)GB46045-46100 then 46342 on]
HNS0406 sup.3 Screw -plate to crankcase (3) -(cam locking, engine unit, sup)
HNS0406 16.A.3 Screw -locating plate to crankcase (3) -(camshaft, engine unit, 1600)
HNS0406 16.A.24 Screw -locating plate to crankcase (3) -(camshaft, engine unit, 1622)
HNS0406 TC.A.6 Screw -plate to crankcase (3) -(half speed shaft, engine, Twin Cam)
HNS0406 TC.A.13 Screw -strainer to pump (3) -(oil.pump, engine, Twin Cam) -changed to
HNS0407 Com.(E)499 -always use HNS0407
HNS0407 15.A.8 Screw -cover to body [Fin(E)GB46044 except 46101-46341]
HNS0407 15.F.2 Set screw for block to casting (shift rod locating block)
HNS0407 sup.9 Screw -strainer to pump (3) -(oil, engine unit, sup)
HNS0407 16.A.8 Bolt -oil strainer to oil pump (3) -(engine unit, 1600)
HNS0407 16.A.29 Bolt -oil strainer to pump (3) -(oil, engine unit, 1622)
HNS0407 16.F.2 Screw -locating block to gearbox (2) -(gearbox, 1600 and 1600-MK-II)
HNS0407 TC.A.13 Screw -strainer to pump (3) -(oil.pump, engine, Twin Cam) Com.(E)499-
was HNS0406 -always use HNS0407
HNS0407 TC.F.2 Set screw -block to casing (2) -(shaft locating block, gearbox
assemblty, Twin Cam)
HNS0408 15.A.8 Screw -cover to body(short) -Com(E)GB46045-46101 then 46342 on
HNS0408 sup.9 Screw -cover -short -(oil pump, engine unit, sup)
HNS0408 16.A.8 Screw -cover -short -(oil pump, engine unit, 1600)
HNS0408 16.A.29 Screw -cover -short -(oil pump, engine unit, 1622)
HNS0409 TC.A.9 Screw -bracket to crankcase -(tensioner, camshaft, engine, Twin Cam)
HNS0414 15.A.8 Screw -cover to body (long)[Com(E)GB46045-46101 then 46342 on]
HNS0414 16.A.8 Screw -cover-long -(oil pump, engine unit, 1600)
HNS0414 16.A.29 Screw -cover -lomg -(oil pump, engine unit, 1622)
HNS0505 TC.A.6 Screw --plate to crankcase (6) -(front.eng.plate, engine, Twin Cam)
HNS0506 15.Q.1 Screw for bracket assembly to front extension (6)
HNS0506 16.M.6 Screw -bracket assembly to front extension (6) -(chassis frame, 1600
and 1600-MK-II)
HNS0507 TC.A.5 Screw -clutch to flywheel (6) -(clutch, Twin Cam)
|