The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - FNN
PART NO.  SPL.PAGE  DESCRIPTION                                                           
FNN105    15.A.6    Nut for rocker bracket studs (4) -(cyl.head, engine unit, 1500)
FNN105    15.A.8    Nut for stud - oil pump to crankcase (3) -(engine unit, 1500)
FNN105    15.A.8    Nut for bolt - strainer [Fin(E)GB46044 except 46101-46342]
FNN105    sup.6     Nut - rocker bracket stud (4) -(cyl.head, engine unit, sup)
FNN105    sup.9     Nut - stud (3) -(oil pump, engine unit, sup)
FNN105    16.A.6    Nut - rocker bracket stud (4) -(oil pump, engine unit, 1600)
FNN105    16.A.8    Nut -stud -oil pump to crankcase (3) -(engine unit, 1600)
FNN105    16.A.26   Nut -rocker brcket stud (4) -(engine unit, 1622)
FNN105    16.A.29   Nut -stud -oil pump to crankcase (3) -(engine unit, 1622)
FNN105    16.J.2    Nut -bolt (2) -(U-joint, steering, 1600 and 1600-MK-II) -was 17H3840
FNN105    TC.A.1    Nut for stud (3) -(oil pump, cyl.block assy, engine, Twin Cam)
FNN105    TC.A.9    Nut for stud (4) -(camshaft sprocket support plate, case front timing,
    camshaft, engine, Twin Cam)
FNN105    TC.A.11   Nut for stud (12) -(camshaft bearing, chwvga, cyl.head, engine, Twin
    Cam)
FNN107    16.H.1    Nut -stud (4) -(bearing caps, differential, rear axle, 1600 and
    1600-MK-II)
FNN107    16.H.5    Nut -stud (4) -(bearing caps, differential, rear axle, ARDB model
    1600 and 1600-MK-II) -Com.(C)91240
FNN107    TC.F.1    Nut for stud (4) -(bearing caps, differential, rear axle, Twin Cam)
FNN206    16.E.3    Locknut -hose -(clutch controls, ARDB model 1600) -Com.(C)91240-
    was BCA4092
FNN207    16.N.1    Nut-shaft -(dynamo, 1600 and 1600-MK-II) -Com.(E)GA/H6272 -was 7H5034-
    also was 47H5215
FNN412    16.K.1    Nut -steering knuckle -RHT -(front suspension, 1600 and 1600-MK-II
    std.model)
FNN2412   16.K.1    Nut -steering knuckle -LHT -(front suspension, 1600 and 1600-MK-II
    std.model)
FNN504    15.F.2    Nut for screw (1st-2nd shift fork, gearbox, 1500)
FNN504    15.F.2    Nut for screw (3rd-4th shift fork, gearbox, 1500)
FNN504    15.F.2    Nut for screw (reverse shift fork, gearbox, 1500)
FNN504    16.F.2    Nut -fork locating screw -(reverse shift fork, gearbox, 1600 and
    1600-MK-II)
FNN504    16.F.2    Nut -fork locating screw -(1st-2nd shift fork, gearbox, 1600 and
    1600-MK-II)
FNN504    16.F.2    Nut -fork locating screw -(3rd-4th shift fork, gearbox, 1600 and
    1600-MK-II)
FNN504    TC.F.2    Nut for screw -(1st-2nd fork, gearbox assy, Twin Cam)
FNN504    TC.F.2    Nut for screw -(3rd-4th fork, gearbox assy, Twin Cam)
FNN504    TC.F.2    Nut for screw -(reverse fork, gearbox assy, Twin Cam)
FNN605    15.A.5    Locknut - tappet adjusting screw [Fin (E) GB47900
HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2020 Barney Gaylord -- Copyright and reprint information