The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - AUC
PART NO.  SPL.PAGE  DESCRIPTION                                                           
AUC780    ST.       Carburetors -1-3/4 in.(44.45 mm) (1 pair) -(racing and competition
    equipment)
AUC877    TC.D.4    Carburetor installation (1 pair) -(carburetors, Twin Cam)
AUC943    16.D.4    Carburetor installation (1 pair) -(carburetors, 1600)
AUC1006   15.D.6    Washer (brass) -(jet lever connecting, carburetor, 1500)
AUC1006   16.D.6    Washer (brass) -(link between choke arms, carburetor, 1600)
AUC1006   TC.D.4    Washer (brass) -(link, carburetor, Twin Cam)
AUC1058   15.D.4    Circlip for lifting pin (Truarc) (2) -(carburetors, 1500)
AUC1123   15.D.5    Float (2) -(carburetors, 1500)
AUC1123   16.D.6    Float (2) -(carburetors, 1600)
AUC1123   TC.D.4    Float (2) -(carburetors, Twin Cam)
AUC1134   TC.D.4    Grommet (rubber) (4) -(carburetors, Twin Cam) -changed to AUC1534
AUC1135   15.D.5    Bolt -holding up -float chambers (2) -(carburetors, 1500)
AUC1135   TC.D.4    Bolt -chamber to body (2) -(carburetors, Twin Cam)
AUC1137   TC.D.4    Washer -dished -for bolt (2) -(chamber to body,carburetors, Twin Cam)-
    changed to AUC1337
AUC1147   16.D.6    Washer -lid (2) -(float chambers, carburetors, 1600)
AUC1147   TC.D.4    Washer -lid (2) -(float chambers, carburetors, Twin Cam)
AUC1149   15.D.4    Pin -piston lifting (2) -(carburetors, 1500)
AUC1151   15.D.4    Spring for lifting pin (2) -(carburetors, 1500)
AUC1151   16.D.4    Spring -pin (2) -(lifting, carburetors, 1600)
AUC1151   TC.D.4    Spring -pin (2) -(lifting, carburetors, Twin Cam)
AUC1152   15.D.5    Pin for hinged lever -float (2) -(carburetors, 1500)
AUC1152   TC.D.4    Pin for hinged lever (2) -(carburetors, Twin Cam)
AUC1158   15.D.4    Spring -gland (2) -(jet sealing, carburetors, 1500)
AUC1158   16.D.4    Spring -gland (2) -(jet sealing, carburetors, 1600)
AUC1158   TC.D.4    Spring -gland (2) -(carburetors, Twin Cam)
AUC1249   16.D.4    Pin -piston lifting (2) -(carburetors, 1600)
AUC1249   TC.D.4    Pin -piston lifting (2) -(carburetors, Twin Cam)
AUC1250   16.D.4    Circlip -pin (2) -(lifting, carburetors, 1600)
AUC1250   TC.D.4    Circlip -pin (2) -(lifting, carburetors, Twin Cam)
AUC1289   TC.D.4    Plug (7mm x 1mm for HS6 carbs) auto ignition (2) -(carburetors, Twin
    Cam)
AUC1334   15.D.5    Grommet for holding up bolt (rubber) -(float chambers, carbs, 1500)
AUC1335   16.D.5    Bolt -chamber to body (2) -(float chambers, carburetors, 1600)-
    Fin.(E)not available
AUC1337   TC.D.4    Washer -dished -for bolt (2) -(chamber to body,carburetors, Twin Cam)-
    was AUC1137
AUC1358   15.D.5    Screw for disc (4) -(throttle plate, carburetors, 1500)
AUC1358   16.D.5    Screw for disc (4) -(throttle plate, carburetors, 1600)
AUC1358   TC.D.4    Screw for disc (4) -(carburetors, Twin Cam)
AUC1384   16.D.6    Washer -pillar (2) -(banjo, carburetors, 1600) -Com.(E)not available
AUC1387   16.D.6    Pillar -banjo (2) -(carburetors, 1600) -Com.(E)not available
AUC1388   16.D.6    Washer -outer (2) -(pillar, carburetors, 1600) -Com.(E)not available
AUC1389   16.D.6    Washer -inner (2) -(pillar, carburetors, 1600) -Com.(E)not available
AUC1501   15.D.5    Lever -throttle spindle -rear carburetor -(carburetors, 1500)
AUC1501   15.D.5    Lever -throttle spindle -rear carburetor -(carburetors, 1600)
AUC1501   TC.D.4    Lever -throttle -(carburetor, Twin Cam) -for AUC9055
AUC1534   16.D.6    Grommet -rubber (4) -(carburetors, 1600)
AUC1534   TC.D.4    Grommet (rubber) (4) -(carburetors, Twin Cam) -was AUC1134
AUC1557   15.D.5    Washer (aluminium) (2) -(float chamber lid, carburetors, 1500)
AUC1557   16.D.6    Washer-aluminium -nut (2) -(float chamber lid, carburetors, 1600)
AUC1557   TC.D.4    Washer for nut (aluminium) (2) -(carburetors, Twin Cam)
AUC1832   15.D.5    Union -banjo -double -rear -(carburetors, 1500)
AUC1832   16.D.6    Union -banjo -double -rear carburetor -(carburetors, 1600)
AUC1832   TC.D.4    Union -banjo -double -(carburetor, Twin Cam) -for AUB9055
AUC1833   TC.D.1    Union -inlet and outlet (2) -(pump assembly, fuel pump, fuel system,
    Twin Cam)
AUC1863   15.D.6    Washer for nut (spring) (2) -(jet lever connecting, carburetor, 1500)
AUC1863   16.D.6    Washer -spring -rod (2) -(jet lever connecting, carburetor, 1600)
AUC1863   TC.D.4    Washer -spring -for rod (2) -(carburetor, Twin Cam)
AUC1867   15.D.5    Cap nut -lid (2) -(float chambers, carburetors, 1500)
AUC1867   16.D.6    Cap nut -lid (2) -(float chambers, carburetors, 1600)
AUC1867   TC.D.4    Cap nut for lid (2) -(carburetors, Twin Cam)
AUC1928   15.D.5    Washer (fibre) (2) -(float chamber lid, carburetors, 1500)
AUC1928   16.D.6    Washer (fibre) (2) -(float chamber lid, carburetors, 1600)
AUC1928   TC.D.4    Washer (fibre) (2) -(carburetors, Twin Cam)
AUC1980   15.D.5    Lever -hinged -float (2) -(carburetors, 1500)
AUC1980   16.D.6    Lever -hinged (2) -(carburetors, 1600) -For use with AUC4260/1 lid
AUC1980   TC.D.4    Lever -hinged (2) -(carburetors, Twin Cam)
AUC2057   16.D.4    Screw -needle locking (2) -(carburetors, 1600)
AUC2106   15.D.5    Pin -lever to spindle (tapered) (2) -(front +rear levers, carbs, 1500)
AUC2106   16.D.5    Pin -throttle stop lever -(front, carburetors, 1600)
AUC2106   16.D.5    Pin -throttle stop lever -(rear, carburetors, 1600)
AUC2106   TC.D.4    Pin for throttle stop lever -(stop adjusting, carburetor, Twin Cam)-
    for AUC9055
AUC2109   15.D.4    Split pin (11) -(for clevis pins and trunnions -(carburetors, 1500)
AUC2109   16.D.4    Split pin -pin -(link to body, front carburetor, 1600) -changed to
    CPS0204
AUC2109   16.D.5    Split pin -pin -(link to body, rear carburetor, 1600)
AUC2109   TC.D.4    Split pin for pin (2) -(link to body, carburetors, Twin Cam)
AUC2109   TC.D.4    Split pin for pin (2) -(lever to jet, carburetors, Twin Cam)
AUC2109   TC.D.4    Split pin for rod -(link, carburetor, Twin Cam)
AUC2114   15.D.4    Spring -adjusting (2) -(carburetors, 1500)
AUC2114   16.D.4    Spring -adjusting (2) -(carburetors, 1600)
AUC2114   TC.D.4    Spring for adjusting nut (2) -(carburetors, Twin Cam)
AUC2116   TC.D.4    Pin for throttle stop lever -(carburetors, Twin Cam) -for AUC9054
AUC2117   15.D.4    Ring (brass) -sealing (2) -(bottom galnd, carburetors, 1500)
AUC2117   16.D.4    Ring -sealing -aluminum (2) -(bottom galnd, carburetors, 1600)
AUC2117   TC.D.4    Ring -sealing (brass) (2) -(gland sealing nut, carburetors, Twin Cam)
AUC2118   15.D.4    Ring (cork) -sealing (2) -(bottom galnd, carburetors, 1600)-
    (see AUC3119, neoprene, for 1500 carbs)
AUC2118   16.D.4    Ring -sealing -cork (2) -(bottom galnd, carburetors, 1600)
AUC2118   TC.D.4    Ring -sealing (cork) (2) -(bottom galnd, carburetors, Twin Cam)
AUC2119   15.D.4    Washer -gland -brass (4) -(jet sealing, carburetors, 1500)
AUC2119   16.D.4    Washer -gland -brass (4) -(jet sealing, carburetors, 1600)
AUC2119   TC.D.4    Washer -gland -brass (4) -(carburetors, Twin Cam)
AUC2120   15.D.4    Washer -gland -cork (4) -(jet sealing, carburetors, 1500)
AUC2120   16.D.4    Washer -gland -cork (4) -(jet sealing, carburetors, 1600)
AUC2120   TC.D.4    Washer -gland -cork (4) -(carburetors, Twin Cam)
AUC2121   15.D.4    Nut -adjusting (2) -(carburetors, 1500)
AUC2121   16.D.4    Nut -adjusting (2) -(carburetors, 1600)
AUC2121   TC.D.4    Nut -adjusting (2) -(carburetors, Twin Cam)
AUC2122   15.D.4    Washer for top bearing (copper) (2) -(carburetors, 1500)
AUC2122   16.D.4    Washer -top bearing -copper (2) -(carburetors, 1600)
AUC2122   TC.D.4    Washer -top bearing (copper) (2) -(carburetors, Twin Cam)
AUC2130   16.D.5    Washer -fibre -bolt (2) -(carburetors, 1600) -Fin.(E)not available
AUC2139   15.D.5    Filter (2) -(with spring, fuel inlet, carburetors, 1500)
AUC2139   16.D.6    Filter (2) -(with spring, fuel inlet, carburetors, 1600)
AUC2139   TC.D.4    Filter (2) -(carburetors, Twin Cam)
AUC2141   15.D.5    Washer for banjo bolt (fibre) (4) -(fuel inlet, carburetors, 1500)
AUC2141   16.D.6    Washer -fibre -bolt (4) -(fuel inlet, carburetors, 1600)
AUC2141   TC.D.4    Washer for bolt (fibre) (4) -(carburetors, Twin Cam)
AUC2156   15.D.5    Nut for lever bolt -(throttle spindle -rear carb, carburetors, 1500)
AUC2156   15.D.6    Nut for rod (2) -(jet lever connecting, carburetor, 1500)
AUC2156   16.D.6    Nut -rod (2) -(connecting choke arms, carburetors, 1600)- changed to
    AJD8012Z
AUC2175   15.D.4    Screw -chamber to body (6) -(carburetors, 1500)
AUC2175   16.D.4    Screw -chamber to body (6) -(carburetors, 1600)
AUC2175   TC.D.4    Screw -chamber to body (6) -(carburetors, Twin Cam)
AUC2198   15.D.5    Lever -throttle stop -rear carburetor -(carburetors, 1500)
AUC2198   16.D.5    Lever -stop -throttle -(rear carb, carburetors, 1600)
AUC2198   TC.D.4    Lever -stop -throttle -(carburetor, Twin Cam) -for AUC9054
AUC2246   15.D.5    Washer for lever bolt (spring) -(throttle spindle -rear carb, 1500)
AUC2246   TC.D.4    Washer -spring -for screw(6) -(chamber to body, carburetors, Twin Cam)
AUC2246   TC.D.4    Washer -spring -for bolt -(lever, carburetor, Twin Cam) -for AUC9055
AUC2246   TC.D.4    Washer -spring -for bolt -(drive lever, carburetor, Twin Cam)
AUC2381   15.D.4    Pin for link to body (2) -(carburetors, 1500)
AUC2381   15.D.4    Pin for link to lever (2) -(carburetors, 1500)
AUC2381   15.D.4    Pin for jet to lever (2) -(carburetors, 1500)
AUC2381   16.D.4    Pin -link to body -(front, carburetors, 1600)
AUC2381   16.D.4    Pin -link to lever -(front, carburetors, 1600) -changed to AUC5009-
    Com.(E)not available
AUC2381   16.D.4    Pin -lever to jet -(front, carburetors, 1600)
AUC2381   16.D.4    Pin -link to body -(rear, carburetors, 1600)
AUC2381   16.D.5    Pin -link to lever -(rear, carburetors, 1600) -changed to AUC5009-
    Com.(E)not available
AUC2381   16.D.5    Pin -lever to jet -(rear carburetors, 1600)
AUC2381   TC.D.4    Pin -link to body -(carburetors, Twin Cam)
AUC2381   TC.D.4    Pin -lever to jet (2) -(carburetors, Twin Cam)
AUC2402   15.D.6    Rod -throttle spinde connecting -(carburetor, 1500)
AUC2402   16.D.6    Rod -throttle connecting -(carburetor, 1600)
AUC2413   TC.D.4    Rod -throttle connecting -(carburetor, Twin Cam)
AUC2451   15.D.5    Spring for lever stop screw (2) -(idle adjust, front carb, 1500)
AUC2451   16.D.5    Spring -screw (2) -(lever stop, idle adjust, front carb, 1600)
AUC2451   16.D.5    Spring -screw -(lever stop, idle adjust, rear carb, 1600)
AUC2468   15.D.4    Screw for needle (locking) (2) -(carburetor, 1500)
AUC2468   TC.D.4    Screw -needle locking (2) -(carburetors, Twin Cam)
AUC2521   15.D.5    Screw -lever stop -adjusing (2) -(front +rear, carburetors, 1500)
AUC2521   16.D.5    Screw -stop adjusing (2) -(front carb, carburetors, 1600)
AUC2521   16.D.5    Screw -stop adjusing -(rear carb, carburetors, 1600)
AUC2669   15.D.5    Bolt for end clip (2) -(torsion spring, carburetor, 1500)
AUC2669   15.D.6    Bolt for coupling (4) -(rod to spindle -(throttle, carburetor, 1500)
AUC2669   16.D.5    Bolt -clip (2) -(return spring, carburetors, 1600)
AUC2669   16.D.6    Bolt -coupling (4) -(shaft couplings, carburetors, 1600)
AUC2669   TC.D.4    Bolt for clip (2) -(clip for return spring, carburetors, Twin Cam)
AUC2669   TC.D.4    Bolt for coupling (2) -(rod, carburetor, Twin Cam)
AUC2673   15.D.5    Nut for bolt (2) -(end clips, shafts, carburetors, 1500)
AUC2673   15.D.6    Nut for bolt (4) -(coupling, rod to spindle -(throttle, carbs, 1500)
AUC2673   16.D.6    Nut -bolt (4) -(shaft couplings, carburetors, 1600)-changed to
    AJD8014Z
AUC2673   TC.D.4    Nut -bolt (2) -(clip for return spring, carburetors, Twin Cam)
AUC2673   TC.D.4    Nut -bolt (2) -(coupling, rod, carburetor, Twin Cam)
AUC2694   15.D.5    Bolt for lever -(throttle spindle -rear carb, carburetors, 1500)
AUC2694   TC.D.4    Bolt for lever -(carburetor, Twin Cam) -for AUC9055
AUC2694   TC.D.4    Bolt for lever -(drive, carburetor, Twin Cam)
AUC2698   15.D.5    Bolt -banjo (2) -(fuel inlet, carburetors, 1500)
AUC2698   16.D.6    Bolt -banjo (2) -(fuel inlet, carburetors, 1600)
AUC2698   TC.D.4    Bolt -banjo (2) -(carburetors, Twin Cam)
AUC3071   16.D.4    Washer -plain -spring (2) -(for piston spring, carburetors, 1600)
AUC3071   TC.D.4    Washer for spring (2) -(for piston spring, carburetors, Twin Cam)
AUC3116   15.D.5    Disc (2) -(throttle plate, carburetors, 1500)
AUC3116   16.D.5    Disc (2) -(throttle plate, carburetors, 1600)
AUC3119   15.D.4    Ring (neoprene) -sealing (2) -(gland nut, carburetors, 1500)-
    (see AUC2119, cork, for 1600 carbs)
AUC3202   15.D.5    Pipe assembly -drain -front and rear carburetors (2) -(carbs, 1500)
AUC3202   16.D.6    Banjo vent and drain pipe (2) -(carboretors, 1600)
AUC3202   TC.D.4    Banjo vent and drain pipe (2) -(carburetors, Twin Cam)
AUC3230   15.D.4    Bearing -top (2) -(carburetors, 1500)
AUC3230   16.D.4    Bearing -top (2) -(carburetors, 1600)
AUC3230   TC.D.4    Bearing -top (2) -(carburetors, Twin Cam)
AUC3231   15.D.4    Bearing -bottom (2) -(carburetors, 1500)
AUC3231   16.D.4    Bearing -bottom (2) -(carburetors, 1600)
AUC3231   TC.D.4    Bearing -bottom (2) -(carburetors, Twin Cam)
AUC3232   15.D.4    Nut -gland sealing (2) -(carburetors, 1500)
AUC3232   16.D.4    Nut -gland sealing (2) -(carburetors, 1600)
AUC3232   TC.D.4    Nut -gland sealing (2) -(carburetors, Twin Cam)
AUC3233   15.D.4    Washer -bearing -bottom half (2) -(lower sealing, carburetors, 1500)
AUC3233   16.D.4    Washer -bottom bearing -copper (2) -(carburetors, 1600)
AUC3233   TC.D.4    Washer -bottom bearing -copper (2) -(carburetors, Twin Cam)
AUC3242   15.D.5    Spindle -throttle -front and rear carburetor (2) -(carburetors, 1500)
AUC3242   16.D.5    Spindle -throttle -(front carburetor -(carburetors, 1600)
AUC3242   16.D.5    Spindle -throttle -(rear carburetor -(carburetors, 1600)
AUC3280   TC.D.4    Disc -throttle (2) -(carburetors, Twin Cam)
AUC3295   TC.D.4    Chamber -float -(carburetors, Twin Cam)
AUC3296   TC.D.4    Chamber -float -(carburetors, Twin Cam)
AUC3464   15.D.5    Screw -slow-running adjusting -front carburetor -(carburetors, 1500)
AUC3464   TC.D.4    Screw -stop -adjusting -(carburetor, Twin Cam) -for AUC9054
AUC3464   TC.D.4    Screw -stop -adjusting (2) -(carburetor, Twin Cam) -for AUC9055
AUC3465   15.D.5    Spring -adjusting screw -front caruretor -(carburetors, 1500)
AUC3465   TC.D.4    Spring for screw -(stop adjusting, carburetor, Twin Cam) -for AUC9054
AUC3465   TC.D.4    Spring for screw -(stop adjusting, carburetor, Twin Cam) -for AUC9055
AUC3471   15.D.5    Bolt -cam pivot -front carburetor -(carburetors, 1500)
AUC3471   16.D.5    Bolt -pivot -cam plate -(front carb, carburetors, 1600)
AUC3471   TC.D.4    Bolt -pivot -for cam plate -(carburetor, Twin Cam) -for AUC9055
AUC3472   16.D.5    Washer -spring -bolt (cam, front carb, carburetors, 1600)
AUC3472   TC.D.4    Washer -spring -bolt -(pivot for cam plate, carburetor, Twin Cam) -for
    AUC9055
AUC3495   15.D.5    Float chamber -rear -(carburetors, 1500)
AUC3496   15.D.5    Float chamber -front -(carburetors, 1500)
AUC3495   16.D.5    Chamber -float -rear carburetor -(carburetors, 1600)
AUC3496   16.D.5    Chamber -float -front carburetor -(carburetors, 1600)
AUC4196   16.D.4    Trunnion -lever -(carburetors, 1600)
AUC4216   16.D.6    Lid -float chamber -front carburetor -(carburetors, 1600) -changed
    to AUD2284 -AUC4216 not available use AUD2284 with AUD2285 lever
AUC4260   15.D.5    Lid -float chamber -rear carburetor -(carburetors, 1500)
AUC4260   16.D.6    Lid -float chamber -rear carburetor -(carburetors, 1600)
AUC4260   TC.D.4    Lid -float chamber -(carburetors, Twin Cam) -for AUC9054
AUC4261   TC.D.4    Lid -float chamber -(carburetors, Twin Cam) -for AUC9055
AUC4261   15.D.5    Lid -float chamber -front carburetor -(carburetors, 1500)
AUC4334   15.D.6    Coupling, rod to spindle (2) -(throttle, carburetor, 1500)
AUC4334   16.D.6    Coupling, rod to spindle (2) -(throttle, carburetor, 1600)
AUC4334   TC.D.4    Coupling for rod -(carburetor, Twin Cam)
AUC4387   15.D.4    Spring for piston (rod) (2) -(carburetors, 1500)
AUC4387   16.D.4    Spring -red -piston (2) -(carburetors, 1600)
AUC4387   TC.D.4    Spring -red -piston (2) -(carburetors, Twin Cam)
AUC4490   15.D.4    Union -automatic ignition -rear carburetor -(carburetors, 1500)
AUC4612   15.D.5    Washer for bolt (plain) (2) -(end clips, shafts, carburetors, 1500)
AUC4612   15.D.6    Washer for bolt (4) -(coupling, rod to spindle -(throttle, carbs,
    1500)
AUC4612   16.D.5    Washer -plain -bolt (2) -(clip, return spring, carburetors, 1600)
AUC4612   16.D.6    Washer -bolt (4) -(shaft couplings, carburetors, 1600)
AUC4612   TC.D.4    Washer -plain -for bolt (2) -(clip for return spring, carburetors, 
    Twin Cam)
AUC4612   TC.D.4    Washer for bolt (2) -(coupling, rod, carburetor, Twin Cam)
AUC4631   15.D.4    Pin for lever to cam connecting rod -front carburetor -(carbs, 1500)
AUC4667   15.D.4    Spring for lever return (2) -(carburetors, 1500)
AUC4667   16.D.4    Spring -jet lever return -(front lever, carburetors, 1600)
AUC4667   16.D.5    Spring -jet lever return -(rear lever, carburetors, 1600)
AUC4667   TC.D.4    Spring -jet lever return (2) -(carburetors, Twin Cam)
AUC4712   16.D.5    Lever -stop -throttle -(front carb, carburetors, 1600)
AUC4713   15.D.5    Lever -throttle stop -front carburetor -(carburetors, 1500)
AUC4713   TC.D.4    Lever -stop -throttle -(carburetor, Twin Cam) -for AUC9055
AUC4730   15.D.5    Cam -slow running -front carburetor -(carburetors, 1500)
AUC4730   16.D.5    Cam plate -(slow running, front carb, carburetors, 1600)
AUC4730   TC.D.4    Cam plate -(slow running, carburetor, Twin Cam) -for AUC9055
AUC4732   15.D.5    Rod -link -jet lever to cam -front carburetor -(carburetors, 1500)
AUC4732   16.D.5    Link -tension -(front carburetor, carburetor, 1600)
AUC4765   TC.D.4    Spindle -throttle -(carburetor, Twin Cam) -for AUC9054
AUC4765   TC.D.4    Spindle -throttle -(carburetor, Twin Cam) -for AUC9055
AUC4770   15.D.5    Plate -return spring anchor (2) -(torsion spring, carburetors, 1500)
AUC4770   16.D.5    Plate -return spring anchor (2) -(torsion spring, carburetors, 1600)
AUC4770   TC.D.4    Plate -return spring -anchor (2) -(carburetors, Twin Cam)
AUC4771   15.D.5    End clip -spindle -front and rear carburetors (2) -(carb's, 1500)
AUC4771   16.D.5    Clip -return spring (2) -(carburetors, 1600)
AUC4771   TC.D.4    Clip for return spring (2) -(carburetors, Twin Cam)
AUC4781   15.D.5    Spring -thottle spindle return -front carburetor -(carburetors, 1500)
AUC4781   16.D.5    Spring -thottle return -front carburetor -(carburetors, 1600)
AUC4781   TC.D.4    Spring -return -(carburetors, Twin Cam) -for AUC9055
AUC4782   15.D.5    Spring -thottle spindle return -rear carburetor -(carburetors, 1500)
AUC4782   16.D.5    Spring -thottle return -rear carburetor -(carburetors, 1600)
AUC4782   TC.D.4    Spring -return -(carburetors, Twin Cam) -for AUC9054
AUC4819   15.D.4    Link for lever to body -(carburetors, 1500)
AUC4819   16.D.4    Link for lever to body -(carburetors, 1600) -changed to AUE373
AUC4819   16.D.4    Link assembly -jet lever -(front, carburetor, 1600)
AUC4819   16.D.5    Link assembly -jet lever -(rear, carburetor, 1600)
AUC4819   TC.D.4    Link assembly -jet lever (2) -(carburetors, Twin Cam)
AUC4900   15.D.4    Washer for cap (fibre) (2) -(carburetors, 1500)
AUC4900   16.D.4    Washer -fibre -cap (2) -(carburetors, 1600)
AUC4900   TC.D.4    Washer for cap (fibre) (2) -(damper, carburetors, Twin Cam)
AUC4915   15.D.6    Rod -jet lever conecting -(Carburetor, 1500)
AUC4915   16.D.6    Rod -jet lever conecting -(Carburetor, 1600)
AUC4915   TC.D.4    Rod -link -(carburetor, Twin Cam)
AUC4916   15.D.6    Trunnion for rod -(jet lever connecting, carburetor, 1500)
AUC4916   TC.D.4    Trunnion for lever -(carburetor, Twin Cam)
AUC5002   15.D.5    Washer -starlock -link and swivel pin (3) -(carburetors, 1500)
AUC5002   16.D.5    Washer -starlock -link and swivel pin (3) -(carburetors, 1600)
AUC5002   TC.D.4    Washer -starlock -for link and swivel pin (3) -(carburetor, Twin Cam)
    -for AUC9055
AUC5004   16.D.4    Washer -starlock -trunnion -(carburetors, 1600)
AUC5004   16.D.4    Washer -starlock -pin -(link to lever, front carburetor, 1600) -use
    with AUC5009 pin (no hole)
AUC5004   16.D.5    Washer -starlock -pin -(link to lever, rear carburetor, 1600) -use
    with AUC5009 pin (no hole)
AUC5004   TC.D.4    Washer -starlock for pin (2) -(carburetors, Twin Cam)
AUC5009   16.D.4    Pin -link to lever -(front, carburetors, 1600) -was AUC2381 -use with
    AUC5004 starlock washer (no hole)
AUC5009   16.D.5    Pin -link to lever -(rear, carburetors, 1600) -was AUC2381 -use with
    AUC5004 starlock washer (no hole)
AUC5009   TC.D.4    Pin -link to lever (2) -(carburetors, Twin Cam)
AUC5011   16.D.5    Swivewl pin -link to lever -(front carburetor, carburetor, 1600)
AUC5011   TC.D.4    Swivewl pin -link to lever -(carburetor, Twin Cam) -for AUC9055
AUC5055   TC.D.4    Link -tension -(carburetor, Twin Cam) -for AUC9055
AUC5091   15.D.4    Lever -front carburetor -(carburetors, 1500)
AUC5091   16.D.4    Lever -jet -front carburetor -(carburetors, 1600)
AUC5091   TC.D.4    Lever -jet -(carburetors, Twin Cam)
AUC5091   TC.D.4    Lever -jet -(carburetor, Twin Cam)
AUC5092   15.D.4    Lever -rear carburetor -(carburetors, 1500)
AUC5092   16.D.5    Lever -jet rear carburetor -(carburetors, 1600)
AUC5092   TC.D.4    Lever -jet -(carburetor, Twin Cam)
AUC6031   15.D.4    Body -front carburetor -(carburetors, 1500)
AUC6033   15.D.4    Body -rear carburetor -(carburetors, 1500)
AUC6033   16.D.4    Body -rear carburetor -(carburetors, 1600)
AUC6056   TC.D.4    Body -front carburetor -(carburetors, Twin Cam)
AUC6059   TC.D.4    Body -rear carburetor -(carburetors, Twin Cam)
AUC8012   TC.D.4    Nut for bolt -(drive lever, carburetor, Twin Cam)
AUC8019   15.D.4    Chamber and piston assembly -suction (2) -(carburetors, 1500)
AUC8052   16.D.4    Chamber and piston assembly (2) -(carburetors, 1600)
AUC8056   TC.D.4    Chamber and piston assembly (2) -(carburetors, Twin Cam)
AUC8102   15.D.4    Cap and damper assembly (2) -(carburetors, 1500)
AUC8103   TC.D.4    Cap assembly (2) -(carburetors, Twin Cam) -(Correction, changed to 
    AUC8114)
AUC8114   16.D.4    Cap and damper assembly (2) -(carburetors, 1600)
AUC8114   TC.D.4    Cap and damper assembly (2) -(carburetors, Twin Cam) -(Correction, was 
    AUC8103)
AUC8170   15.D.5    Needle and seat assembly (2) -(float valve, carburetors, 1500)
AUC8170   15.D.6    Needle and seat assembly (2) -(float valve, carburetors, 1600)
AUC8170   TC.D.4    Needle and seat assembly (2) -(carburetors, Twin Cam)
AUC8182   15.D.4    Jet assembly (2) -(carburetors, 1500)
AUC8182   16.D.4    Jet assembly (2) -(carburetors, 1600)
AUC8183   TC.D.4    Jet assembly (2) -(carburetors, Twin Cam)
AUC8207   TC.D.4    Lever -drive (brass) -(carburetor, Twin Cam)
AUC8396   TC.D.4    Washer -plain -for bolt (2) -(coupling -lever -carburetor, Twin Cam)
AUC8399   TC.D.4    Lever -coupling -(carburetor, Twin Cam)
AUC8400   TC.D.4    Bolt fot lever -(coupling, carburetor, Twin Cam)
AUC9020   15.D.4    Carburetor complete -front -(carburetors, 1500)
AUC9021   16.D.4    Body -front carburetor -(carburetors, 1600)
AUC9054   TC.D.4    Carburetor assemblt -front -(carburetors, Twin Cam)
AUC9055   TC.D.4    Carburetor assemblt -rear -(carburetors, Twin Cam)
AUC9066   16.D.4    Carburetor assembly -front -(carburetors, 1600)
AUC9067   16.D.4    Carburetor assembly -rear -(carburetors, 1600)
AUC9080   16.D.6    Lever -hinged (2) -(carburetors, 1600) -For use with AUC4260/1 lid
HomeBackTopNext
Thank you for your comments --Send e-mail to <Barney Gaylord>
© 2020-2024 Barney Gaylord --Copyright and reprint information