The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - AEH313
PART NO.  SPL.PAGE  DESCRIPTION                                                            
AEH313     TC.A.13   Banjo bolt for pipe (crankcase end) -(oil feed, oil.pump, engine,
    Twin Cam)
MGA Twin Cam oil pressure signal connector
MGA Twin Cam oil pressure signal connector

This is the special banjo bolt for connecting the oil pressure signal hose to the engine block on the MGA Twin Cam. The banjo neck will hold the banjo fitting for oil feed line running to the cylinder head for camshaft oiling. Thanks to Neil Burnside on the MGA Twin Cam Group for the picture, as he has made some of these parts.

The small end thread is 1/8-BSP (28 threads per inch) to accept the oil flex hose for the pressure gauge signal. The large end screws into the engine block,

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2021 Barney Gaylord -- Copyright and reprint information