PART NO. SPL.PAGE DESCRIPTION
AAA17 16.D.2 Nut -elbow (2) -(Fuel pump, 1600) -part no. change was 2715
AAA192 16.J.4 Collar -clamping -(adjustable steering column, 1600 and 1600-MK-II)-
was 47327
AAA193 16.J.4 Key -top end -(adjustable steering column, steering, 1600 and
1600-MK-II) -was 47330
AAA260 16.D.2 Rubber -bracket (2) -(Fuel pump, 1600) -part no. change was 53626
AAA301 16.D.3 Clip -pipe to rear shock absorber bolt -(fuel pipes, 1600) was 54516
AAA463 16.N.11 Bead -cover joint -(lamp, number plate, Switzerland, road lamps, 1600
and 1600-MK-II) Com.(C)92079 -was 68944
AAA515 16.D.7 Spring -pawl rod -(handbrake, 1600 and 1600-MK-II) -was 80641
AAA563 16.M.7 Bush -handle plate and shaft -(handbrake, 1600 and 1600-MK-II) -was
81756
AAA627 16.O.2 Pipe -connector to engine (flexible) -(oil gauge, instruments,
std.model, 1600 and 1600-MK-II) -was 83866
AAA628 16.O.2 Connector -oil gauge pipe -(instruments, 1600 and 1600-MK-II)
AAA643 16.O.2 Grommet -oil gauge pipe -(instruments, 1600 and 1600-MK-II) -was
84138
AAA649 16.A3.19 Bracket -accelerator return spring -(engine controls, 1622)-
was 84180
AAA743 16.A.33 Felt 72" wide (A/R) -(trimming, 1600 and 1600-MK-II Tourer) -was
87988
AAA743 16.R.36 Felt 72" wide (A/R) -(trimming, 1600 and 1600-MK-II Coupe) -was 87988
AAA788 16.R.18 Spring -anti-rattle -(bonnet fittings, 1600 and 1600-MK-II) -was
95219
AAA1322 16.K.4 Distance tube -link (4) -(front suspension, 1600 and 1600-MK-II
std.model) -was 126900
AAA1323 16.K.4 Seal -link (8) -(front suspension, 1600 and 1600-MK-II std.model)-
was 126902
AAA1324 16.K.4 Support -link seal (8) -(front suspension, 1600 and 1600-MK-II
std.model) -was 126903
AAA1326 16.K.4 Wishbone assembly -bottom (4) -(front suspension, 1600 and 1600-MK-II
std.model) -was 126908
AAA1329 16.K.4 Bush -bottom wishbone (8) -(front suspension, 1600 and 1600-MK-II
std.model) -was 12690 -was 126914
AAA1330 16.K.4 Washer -wishbone pivot (4) -(front suspension, 1600 and 1600-MK-II
std.model) -was 12690 -was 126915
AAA1333 16.J.1 Shim tail bearing 0.005" (.127mm) -(rack assy, steering, 1600 and
1600-MK-II) -was 126920
AAA1334 16.J.1 Shim tail bearing 0.007" (.178mm) -(rack assy, steering, 1600 and
1600-MK-II) -was 126921
AAA1335 16.J.1 Seal -pinion shaft -(steering, 1600 and 1600-MK-II) -was 126922
AAA1336 16.J.1 Washer -thrust -pinion lower -(rack assy, steering, 1600 and
1600-MK-II)
AAA1390 16.K.4 Washer -thrust -link (8) -(front suspension, 1600 and 1600-MK-II
std.model) -was 127657
AAA1514 16.R.10 Washer -spring -release valve (3) -(boot lid fittings, 1600 and
1600-MK-II) was 128900
AAA1514 16.R.18 Washer -spring -rod (3) -(catch control, primary, bonnet fittings,
1600 and 1600-MK-II)
AAA1524 16.R.10 Clip -boot lid support rod -(boot lid fittings, 1600 and 1600-MK-II)-
was 128978
AAA1628 16.E.2 Spring -pull-off -pedal -(clutch controls, 1600) -was 130154
AAA1628 16.E.3 Spring -pull-off -pedal -(clutch controls, ARDB model 1600) -was
130154
AAA1628 16.E.3 Spring -pull-off -pedal -(clutch controls, ARDB model 1600)-
Com.(C)91240 -was 130154
AAA1628 16.M.1 Spring -pull-off -pedal -(brake pedal, brake controls, std.model 1600
and 1600-MKII) -was 130154
AAA1628 16.M.2 Spring -pull-off -pedal -(brake pedal, brake controls, ARDB model
1600 and 1600-MK-II) -Com.(C)91240 -was 130154
AAA1645 16.R.21 Grommet -bracket (rubber) (2) -(rear bumper assembly, 1600 and
1600-MK-II) -was 130383
AAA1650 16.J.4 Cup -spring cover -(adj.steering column, steering, 1600 and
1600-MK-II) -was 130462
AAA1651 16.J.4 Cover -spring -(adj.steering column, steering, 1600 and 1600-MK-II)-
was 130463
AAA1679 16.J.1 Washer -thrust -pinion upper -(rack assy, steering, 1600 and
1600-MK-II) -was 130795
AAA1682 16.J.1 Seal -rack to tie rod (2) -(rack assy, steering, 1600 & 1600-MK-II)-
was 130801
AAA1876 16.R.18 Rod -control (secondary) -(bonnet fittings, 1600 and 1600-MK-II)-
was 133213
AAA1881 16.R.10 Grommet -release rod -(boot lid fittings, 1600 and 1600-MK-II)-
was 133221
AAA1881 16.R.18 Grommet -dash panel -(catch control rod, primary, bonnet fittings,
1600 and 1600-MK-II) was 133221
AAA1882 16.R.10 Plate -release rod guide -(boot lid fittings, 1600 and 1600-MK-II)-
was 133222
AAA1882 16.R.18 Plate -grommet retaining -(catch control rod, primary, bonnet
fittings, 1600 and 1600-MK-II) was 133222
AAA2088 16.N.12 Bracket -horn -(low note standard, 1600 and 1600-MK-II) -was 135448
AAA2107 16.N.12 Bracket -horn -(high note optional, 1600 and 1600-MK-II) -was 135761
AAA2179 16.R.19 Bracket -lamp -(number plate -rear, 1600 and 1600-MK-II) -was 136271
AAA2398 16.R.10 Spring -boot lid support rod -(boot lid fittings, 1600 and
1600-MK-II) -was 139282
AAA2398 16.R.18 Spring -rod -(bonnet fittings, 1600 and 1600-MK-II) -was 139282
AAA3151 16.C.1 Tube -drain -(radiator, cooling system, 1600) -was 180079
AAA3406 16.R.43 Finisher -demist nozzle (2) -(sundries, 1600 and 1600-MK-II) -was
182143
AAA3447 16.S.1 Bag -tool -(tool kit, 1600 and 1600-MK-II) -was 181756
AAA3679 16.R.9 Screw -floorboard carpet fixing (4) -(floor, 1600 and 1600-MK-II)
AAA3763 16.R.42 Bezel -flasher warning light -(fascia panel, 1600 and 1600-MK-II)-
was 184166
AAA3838 16.H.10 Clip -U -rear spring -(4) -(1600 and 1600-MK-II) -was 184448
AAA4039 16.G.1 Bolt -shaft to pinion flange (front and rear) (8) -(propshaft, 1600
and 1600-MK-II) -was 185393
AAA4129 16.E.3 Bush -(clutch pedal, clutch controls, ARDB model 1600) Com.(C)91240-
was 185794
AAA4129 16.M.2 Bush -(brake pedal, brake controls, ARDB model 1600) Com.(C)91240-
was 185794
AAA4130 16.M.1 Distance piece -pedal (2) -(brake controls, std.model, 1600 and
1600-MK-II) -was 185705
AAA4130 16.M.2 Distance piece -pedal (2) -(brake controls, ARDB model 1600 and
1600-MK-II) -was 185795
AAA4133 16.M.1 Distance washer -pedal -(brake controls, std.model, 1600 and
1600-MK-II) -was 185798
AAA4258 16.S.1 Strap -tool bag (2) -(tool kit, 1600 and 1600-MK-II) -was 186890
AAA4598 16.R.18 Buffer -bonnet lid (10) -(bonnet fittings, 1600 and 1600-MK-II)-
was 271601
AAA4657 16.R.46 Washer -(for union at pump return, heater, 1600 and 1600-MK-II) -was
300398
AAA4714 16.H.4 Spring -shoe steady (2) -(rear brakes, standard model, 1600 and
1600-MK-II) -was 301020
AAA4756 16.M.3 Plate -boot fixing -(master cylinder, std.model 1600 and 1600-MK-II)-
was 301549
AAA4757 16.M.3 Joint -plate -(master cylinder, std.model 1600 and 1600-MK-II)-
was 301550
AAA4758 16.M.3 Screw -cover to body (5) -(master cylinder, std.model 1600 and
1600-MK-II) -was 301551
AAA4758 16.M.3 Screw -fixing plate (2) -(boot fixing, master cylinder, std.model
1600 and 1600-MK-II) -was 301551
AAA5023 16.K.4 Rubber -check (2) -(front suspension, 1600 and 1600-MK-II std.model)-
was 500822
AAA5024 16.K.4 Distance piece -check rubber (2) -(front suspension, 1600 and
1600-MK-II)
AAA5053 16.R.19 Washer -number plate (rubber) (4) -(number plate, rear, 1600 and
1600-MK-II) was 500946
AAA5115 16.R.14 Buffer assembly -door (4) -(door fittings, 1600 and 1600-MK-II
Tourer) -was MB19956
AAA5130 16.R.37 Washer -cup -plate (2) -(teardrop, hood and tonneau cover, 1600 and
1600-MK-II Tourer) -was MB19956
AAA5154 16.R.32 Stud -fixing side curtain (2) -(trimming, 1600 and 1600-MK-II
Tourer) -was MB21959
AAA5166 16.R.37 Wing bolt -hood to screen (2) -(trimming, 1600 and 1600-MK-II
Tourer) -was MB22438
AAA5166 16.R.39 Screw -thumb -canopy retaining (2) -(alloy hard top, optional extra,
1600 and 1600-MK-II Tourer) -was AHH5670 and MB22438
AAA5166 16.R.40 Screw -front securing (2) -(fibre glass hardtop, 1600 and 1600-MK-II
Tourer) Com.(C)68851 -was AHH5670 and MB22438
AAA5981 16.B.3 Cable -H.T. -no. 1 13" (33.02cm) (A/R) -(ignition, 1600 ) -only
available in multiples of feet
AAA5981 16.B.3 Cable -H.T. -no. 2 10-1/2" (26.67cm) (A/R) -(ignition, 1600 ) -only
available in multiples of feet
AAA5981 16.B.3 Cable -H.T. -no. 3 7-1/2" (19.05cm) (A/R) -(ignition, 1600 ) -only
available in multiples of feet
AAA5981 16.B.3 Cable -H.T. -no. 4 9" (22.86cm) (A/R) -(ignition, 1600 ) -only
available in multiples of feet
|