The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 99
PART NO.  SPL.PAGE  DESCRIPTION                                                           
2715      15.D.2    Nut for elbow (2) -(fuel pump, 1500)
2718      15.D.2    Olive for elbow (2) -(fuel pump, 1500)
5843      15.R.11   Clip for starting handle -(3) -(boot)
5843      16.R.10   Clip -starting handle (3) -(boot lid fittings, 1600 and 1600-MK-II)-
    changed to ADB4825
5843      TC.R.10   Clip -starting handle (3) -(boot, Twin Cam) -changed to ADB4825
7700      15.R.36   Washer -cup -No. 6 -for screw (6) -(fixing rear shelf fillet, 1500 C)
7700      16.R.35   Washer for screw (6) -(rear shelf fillet to body, trimming, 1600 and
    1600-MK-II Coupe) -changed to FWP106
7700      TC.R.45   Washer for screw (cup) (6) -(fixing rear shelf fillet, trimming,
    Coupe, Twin Cam)
7701      15.R.31   Cup washer #4 for liners and pockets screw (70) -(trimming 1500 T)
7701      15.R.36   Washer -cup -No. 4 -for liner screws (42) -(trimming 1500 Coupe)
7701      16.R.31   Washer -cup -No. 4 -liner and pocket screw (8) -(trimming, 1600 and
    1600-MK-II Tourer) -changed to FWP106
7701      16.R.35   Washer for screw (30) -(liners to body, trimming, 1600 and 1600-MK-II
    Coupe) -changed to FWP106
7701      TC.R.38   Washer for screw (cup) (10) -(dash side liner L/H to body -(trimming,
    Tourer, Twin Cam)
7701      TC.R.39   Washer for screw (cup) (26) -(dash side liner L/H to body -(fixing
    door liner, trimming, Tourer, Twin Cam)
7701      TC.R.39   Washer for screw (cup) (2) -(fixing rear quarter liners (1/2")-
    trimming, Tourer, Twin Cam)
7701      TC.R.42   Washer for screw (cup) (10) -(fixing liner w/map pocket (trimming,
    Coupe, Twin Cam)
7701      TC.R.43   Washer for screw (cup) (16) -(fixing door liner, trimming, Coupe, Twin
    Cam)
7701      TC.R.43   Washer for screw (cup) (10) -(fixing rear quarter liner, trimming,
    Coupe, Twin Cam)
7701      TC.R.43   Washer for screw (cup) (16) -(fixing header liner, trimming, Coupe,
    Twin Cam)
7701      TC.R.43   Washer for screw (cup) (14) -(fixing cant rail liner, trimming, Coupe,
    Twin Cam)
7701      TC.R.44   Washer for screw (cup) (2) -(fixing door capping, trimming, Coupe,
    Twin Cam)
7701      TC.R.45   Washer for screw (cup) (2) -(fixing rear quarter capping, trimming,
    Coupe, Twin Cam)
7722      15.N.3    Washer for screw (cup) (3) (dipper switch bracket to bulkhead, 
    switches, electrical, 1500)
7722      TC.N.3    Washer for screw (cup) LHD (2) (dipper switch bracket to bulkhead,
    switches, electrical, Twin Cam) -Fin.(C)2280
39501     16.N.11   Screw -cover fixing (2) - (number plate lamp Switzerland, road lamps,
    1600 and 1600-MK-II) Com.(C)92079 -changed to AJD2244C
45223     15.B.2    Cable -No. 1 HT (13" long) (A/R) -(ignition, 1500)
45223     15.B.2    Cable -No. 2 HT (10-1/2" long) (A/R) -(ignition, 1500)
45223     15.B.2    Cable -No. 3 HT (7-1/2" long) (A/R) -(ignition, 1500)
45223     15.B.2    Cable -No. 4 HT (9" long) (A/R) -(ignition, 1500)
45223     TC.B.2    Cable -No. 1 HT (27-1/2" long) (A/R) Com.(E)556 -(ignition, Twin Cam)-
    length increased 28"
45223     TC.B.2    Cable -No. 2 HT (26-1/2" long) (A/R) Com.(E)556 -(ignition, Twin Cam)-
    length increased 28-1/2"
45223     TC.B.2    Cable -No. 3 HT (26-1/2" long) (A/R) Com.(E)556 -(ignition, Twin Cam)-
    length increased 32"
45223     TC.B.2    Cable -No. 4 HT (26-1/2" long) (A/R) Com.(E)556 -(ignition, Twin Cam)-
    length increased 33"
45223     TC.B.2    Cable cooil to distribuor (17" long) (A/R) -(ignition, Twin Cam)
47325     15.J.4    Washer for clamp collar bolt (steering column adjustable, 1500)
47325     16.J.4    Washer -bolt -(plain, clamping collar, adj.steering column, 1600 and
    1600-MK-II) -changed to PWP105
47325     TC.J.3    Washer for bolt -(clamping collar, adj.steering column, Twin Cam)-
    optional extra
47327     15.J.4    Clamp collar (steering column adjustable)
47327     16.J.4    Collar -clamping -(adjustable steering column, 1600 and 1600-MK-II)-
    changed to AAA193
47327     TC.J.3    Collar -clamping -(adjustable steering column, steering, Twin Cam)-
    optional extra
47330     15.J.4    Key -top end -(adjustable steering column, 1500)
47330     16.J.4    Key -top end -(adjustable steering column, 1600 and 1600-MK-II)-
    changed to AAA193
47330     TC.J.3    Key for tube -(inner top, adjustable column, steering, Twin Cam)-
    optional extra
53626     15.D.2    Rubber -bracket (2) -(fuel pump, 1500)
53626     16.D.2    Rubber -bracket (2) -(fuel pump, 1600) -part no. changed to AAA260
53626     TC.D.2    Rubber -bracket (4) -(monting plate, fuel pump, fuel system, Twin Cam)
53627     TC.D.2    Retainer -rubber mounting (2) -(monting plate, fuel pump, fuel system,
    Twin Cam)
54516     15.D.3    Clip for pipe to rear shock absorber bolt -(fuel pipes, 1500)
54516     16.D.3    Clip -pipe to rear shock absorber bolt -(fuel pipes, 1600) changed to
    AAA301
54516     TC.D.3    Clip -pipe to rear shock absorber bolt -(fuel pipes, Twin Cam)
64401     15.R.9    Countersunk cup washer for screw -(66) -(floor and tunnel, 1500)
68701     15.M.2    Valve assembly -(master cylinder brake check)
68944     16.N.11   Bead -cover joint -(lamp, number plate, Switzerland, road lamps, 1600
    and 1600-MK-II) Com.(C)92079 -changed to AAA463
80641     15.M.4    Spring -pawl rod -(handbrake, 1500)
80641     16.D.7    Spring -pawl rod -(handbrake, 1600 and 1600-MK-II) -changed to AAA515
80641     TC.M.4    Spring -pawl rod -(handbrake, Twin Cam)
81614     15.P.1    Cap for wire wheel -R/H (2) -changed to ATB4222 Com.(C)40857 -
    changed to 1B8077 Com.(C)48730 -(see alternate AHH8008, Germany)
81615     15.P.1    Cap for wire wheel -L/H (2) -changed to ATB4223 Com.(C)40857 -
    changed to 1B8078 Com.(C)48730 -(see alternate AHH8009, Germany)
81756     15.M.4    Bush for handle plate and shaft -(inside hand brake handle)
81756     16.M.7    Bush -handle plate and shaft -(handbrake, 1600 and 1600-MK-II)-
    changed to AAA563
81756     TC.M.4    Bush -handle plate and shaft -(handbrake, Twin Cam)
83866     15.O.3    Pipe -flexible -for connector to engine (oil signal hose)
83866     16.O.1    Pipe -connector to engine (flexible) -(oil gauge, instruments,
    std.model, 1600 and 1600-MK-II) -changed to AAA627
83875     15.O.3    Connector for oil gauge pipes (at starter switch bracket)
83875     16.O.1    Connector -oil gauge pipe -(at starter switch bracket, instruments,
    1600 and 1600-MK-II) -was 83875
83875     TC.O.2    Connector -oil gauge pipe -(at starter switch bracket, instruments,
    Twin Cam)
84138     15.O.3    Grommet for oil gauge pipe (at bulkhead)
84138     16.O.1    Grommet -oil gauge pipe -(instruments, 1600 and 1600-MK-II) -changed
    to AAA628
84138     TC.O.2    Grommet -oil gauge pipe -(instruments, Twin Cam)
84180     15.A.19   Bracket -accelerator return spring -(accelerator control, 1500)
84180     16.A3.19  Bracket -accelerator return spring -(engine controls, 1622)-
    changed to AAA649
84180     TC.A.24   Bracket -accelerator return spring -(engine controls, Twin Cam)
87988     16.R.33   Felt 72" wide (A/R) -(trimming, 1600 and 1600-MK-II Tourer) -changed
    to AAA743
87988     16.R.36   Felt 72" wide (A/R) -(trimming, 1600 and 1600-MK-II Coupe) -changed
    to AAA743
87988     TC.R.47   Felt 72" wide (A/R) -(bulk materials, Coupe, Twin Cam)
94605     15.R.9    Screw in floorboard for carpet fixing -(12) -(floor and tunnel, 1500)
94605     16.R.9    Screw -floorboard carpet fixing (12) -(floor, 1600 and 1600-MK-II)-
    changed to LFP810
94605     TC.R.8    Screw -carpet fixing (front and center) (12) -(flooring, Coupe, Twin
    Cam)
95219     15.R.17   Spring for bonnet catch anti-rattle -(bonnet catch control)
95219     16.R.18   Spring -anti-rattle -(bonnet fittings, 1600 and 1600-MK-II) -changed
    to AAA788
95219     TC.R.17   Spring -anti-rattle -(bonnet fittings, Twin Cam)
95482     15.D.3    Clip -hose (2) -(filler connection, fuel tank, 1500)
95482     16.D.3    Clip -hose (2) -(filled connection, fuel tank, 1600)
95482     TC.D.3    Clip -hose (2) -(filled connection, fuel tank, Twin Cam)
95621     15.C.1    Clip for hose -top and bottom (4) -(cooling system, 1500)
95621     16.C.1    Clip -hose (4)  -(radiator hoses, cooling system, 1600)
95621     TC.C.1    Clip -small)  -(bottom radiator hose, cooling system, Twin Cam)
95621     TC.C.1    Clip -small)  -(top radiator hose, cooling system, Twin Cam)
126900    15.K.3    Distance tube for link (4) -(front suspension, 1500)
126900    16.K.4    Distance tube -link (4) -(front suspension, 1600 and 1600-MK-II
    std.model) -changed to AAA1322
126900    TC.K.3    Distance tube -lower link (2) -(spring pan to wishbone, front
    suspension, Twin Cam)
126900    TC.K.3    Distance tube -upper link (2) -(shock absorber to link, front
    suspension, Twin Cam)
126902    15.K.3    Seal -link (8) -(front suspension, 1500)
126902    16.K.4    Seal -link (8) -(front suspension, 1600 and 1600-MK-II std.model)-
    changed to AAA1323
126902    TC.K.3    Seal -link (4) -(front suspension, Twin Cam)
126902    TC.K.3    Seal for upper link (4) -(shock absorber to link, front suspension,
    Twin Cam)
126903    15.K.3    Support for link seal (8) -(front suspension, 1500)
126903    16.K.4    Support -link seal (8) -(front suspension, 1600 and 1600-MK-II
    std.model -changed to AAA1324
126903    TC.K.3    Support for link seal (4) -(front suspension, Twin Cam)
126903    TC.K.3    Support for link seal (4) -(shock absorber to link, front suspension,
    Twin Cam)
126905    15.K.3    Spring pan assembly (2) -(front suspension, 1500) -change to AHH5952
    Com.(C)66574
126905    TC.K.3    Spring pan assembly (2) -(front suspension, Twin Cam) -change to
    AHH5925 Com.(C)2275 
126908    15.K.3    Bottom wishbone assembly (4) -(front suspension, 1500)
126908    16.K.4    Spring pan assembly (4) -(front suspension, 1600 and 1600-MK-II
    std.model) -changed to AHH5925
126908    TC.K.3    Wishbone assembly -bottom (4/2) -(front suspension, Twin Cam)-
    quantity reduced at (C)2275
126914    15.K.3    Bush -bottom wishbone (8) -(rubber, front suspension, 1500)
126914    16.K.4    Bush -bottom wishbone (8) -(rubber, front suspension, 1600 and
    1600-MK-II std.model) -changed to AAA1329
126914    TC.K.3    Bush -bottom wishbone (8) -(rubber, front suspension, Twin Cam)
126915    15.K.3    Washer -wishbone pivot (4) -(front suspension, 1500)
126915    16.K.4    Washer -wishbone pivot (4) -(front suspension, 1600 and 1600-MK-II
    std.model) -changed to AAA1330
126915    TC.K.3    Washer for wishbone pivot (4) -(front suspension, Twin Cam)
126920    16.J.1    Shim tail bearing 0.005" (.127mm) -(rack assy, steering, 1600 and
    1600-MK-II) -changed to AAA1333
126920    TC.J.1    Shim tail bearing 0.005" (.127mm) -(rack assy, steering, Twin Cam)
126921    16.J.1    Shim tail bearing 0.007" (.178mm) -(rack assy, steering, 1600 and
    1600-MK-II) -changed to AAA1334
126921    15.J.1    Shim for tail bearing (0.007") (A/R) (steering rack, steering, 1500)
126921    TC.J.1    Shim for tail bearing (0.007" [.1778mm]) (A/R) -(rack assy, steering,
    Twin Cam)
126922    15.J.1    Seal for pinion shaft (steering rack) -(1500)
126922    15.J.1    Seal -pinion shaft -(steering, 1600 and 1600-MK-II) -changed to
    AAA1335
126922    TC.J.1    Seal for pinion -(steering, Twin Cam)
126926    15.J.1    Washer -thrust -lower pinion -(steering rack, steering, 1500)
126926    TC.J.1    Washer -thrust -lower pinion -(rack assy, steering, Twin Cam)
127657    15.K.3    Washer for link (thrust) -(8 for swivel links)
127657    16.K.4    Washer -thrust -link (8) -(front suspension, 1600 and 1600-MK-II
    std.model) -changed to AAA1390
127657    TC.K.3    Washer for lower link -thrust (4) -(front suspension, Twin Cam)
127657    TC.K.3    Washer for upper link -thrust (4) -(shock absorber to link, front
    suspension, Twin Cam)
128355    15.D.2    Bracket -pump to frame -(fuel pump,1500)
128355    16.D.2    Bracket -pump to frame -(fuel pump,1600) -part no. changed to
    AUA1477
128900    15.R.10   Washer for control rod (spring) (3) -(bonnet catch and control)
128900    15.R.17   Washer for release rods -(3) -(boot)
128900    16.R.10   Washer -spring -release rod valve (3) -(boot lid fittings, 1600 and
    1600-MK-II)- changed to AAA1514
128900    TS.R.9    Washer for release rod (spring) (3) -(boot, Twin Cam)
128900    TC.R.17   Washer for rod (spring) (3) -(bonnet catch control primary, bonnet
    fittings, Twin Cam)
128978    15.R.10   Clip for support rod -(boot)
128978    16.R.10   Clip -boot lid support rod -(boot lid fittings, 1600 and 1600-MK-II)-
    changed to AAA1524
128978    TS.R.9    Clip -boot lid support rod -(boot, Twin Cam)
130154    15.E.2    Spring -pull-off -pedals (2) -(clutch pedal and linkage, 1500)
130154    15.E.2    Spring -pull-off -pedals (2) -(clutch pedal and linkage, 1600)-
    changed to AAA1628
130154   16.E.3    Spring -pull-off -pedal -(clutch controls, ARDB model 1600)-
    Com.(C)91240 -changed to AAA1628
130154   16.M.1    Spring -pull-off -pedal -(brake pedal, brake controls, std.model 1600
    and 1600-MKII) -changed to AAA1628
130154   16.M.2    Spring -pull-off -pedal -(brake pedal, brake controls, ARDB model 1600
    and 1600-MK-II) -Com.(C)91240 -changed to AAA1628
130154   TC.M.1    Spring -pedal pull off -(brake pedal, brake controls, Twin Cam)
130383    15.R.21   Grommet (rubber) for bracket (2) -(rear bumper mounting, rear bumper)
130383    16.R.21   Grommet -bracket (rubber) (2) -(rear bumper assembly, 1600 and
    1600-MK-II) -changed to AAA1645
130383    TC.R.21   Grommet for bracket (rubber) (2) -(bracket to frame, rear bumper
    assembly, Twin Cam)
130462    15.J.4    Cup for spring cover (steering column adjustable, steering, 1500)
130462    16.J.4    Cup -spring cover -(adj.steering column, steering, 1600 & 1600-MK-II)-
    changed to AAA1650
130462    TC.J.3    Cup -spring cover -(adj.steering column, steering, Twin Cam) -optional
    extra
130463    15.J.4    Spring cover (steering column adjustable, steering, 1500)
130463    16.J.4    Cover -spring -(adj.steering column, 1600 and 1600-MK-II) -changed to
    AAA1651
130463    TC.J.3     Cover -spring -(adj.steering column, steering, Twin Cam) -optional
    extra
130795    15.J.1    Washer -thrust -upper pinion (steering rack, steering, 1500)
130795    16.J.1    Washer -thrust -pinion upper -(rack assy, steering, 1600 and
    1600-MK-II) -changed to AHH1679
130795    TC.J.1    Washer -thrust -upper pinion -(rack assy, steering, Twin Cam)
130801    15.J.1    Seal for rack (2) -(steering, 1500)
130801    TC.J.1    Seal -rack to tie rod (2) -(rack assy, steering, Twin Cam)
133213    15.R.17   Rod for lever to slider control -(bonnet catch and control)
133213    16.R.18   Rod -control (secondary) -(bonnet fittings, 1600 and 1600-MK-II)-
    changed to AAA1876
133213    TC.R.17   Rod -lever to slider control -(bonnet fittings, Twin Cam)
133221    15.R.10   Grommet for release rod -(boot)
133221    15.R.17   Grommet for dash panel -(primary rod, bonnet catch control)
133221    16.R.10   Grommet -release rod -(boot lid fittings, 1600 and 1600-MK-II)-
    changed to AAA1881
133221    16.R.18   Grommet -dash panel -(catch control rod, primary, bonnet fittings,
    1600 and 1600-MK-II) -changed to AAA1881
133221    TS.R.9    Grommet -release rod -(boot, Twin Cam)
133221    TC.R.17   Grommet -dash panel -(release rod, bonnet fittings, Twin Cam)
133222    16.R.18   Grommet -dash panel -(catch control rod, primary, bonnet fittings,
    1600 and 1600-MK-II) -changed to AAA1882
133222    15.R.10   Plate for release rod guide -(boot)
133222    15.R.17   Plate for grommet retaining -(primary rod, bonnet catch control)
133222    16.R.10   Plate -release rod guide -(boot lid fittings, 1600 and 1600-MK-II)-
    changed to AAA1882
133222    TS.R.9    Plate -release rod guide -(boot, Twin Cam)
133222    TC.R.17   Plate -grommet retaining -(release rod, bonnet fittings, Twin Cam)
135448    15.N.8    Bracket -horn (R/H standard)
135448    16.N.12   Bracket -horn (R/H front extension low note, 1600 and 1600-MK-II)-
    changed to AAA2088
135448    TC.N.10   Bracket -horn -(R/H front extension low note, flasher-horn controls,
    electrical, Twin Cam)
135761    15.N.8    Bracket -horn (L/H optional, 1500)
135761    16.N.12   Bracket -horn -(L/H high note optional, 1600 and 1600-MK-II) -changed
    to AAA2107
135761    TC.N.10   Bracket -L/H horn -(flasher-horn controls, electrical, Twin Cam)-
    optional extra
136271    15.R.19   Lamp bracket -(rear number plate)
136271    16.R.19   Bracket -lamp -(rear number plate, 1600 and 1600-MK-II) -changed to
    AAA2179
136271    TC.R.19   Bracket -lamp -(rear plate, number plates and fittings, Twin Cam)
139105    15.K.3    Spring -coil -change to AHH5546 Com.(C)15152
139282    15.R.10   Spring for support rod -(boot)
139282    15.R.17   Spring for bonnet lid support rod -(bonnet lid fittings)
139282    16.R.10   Spring -boot lid support rod -(boot lid fittings, 1600 and
    1600-MK-II) -changed to AAA2398
139282    16.R.18   Spring -rod -(bonnet fittings, 1600 and 1600-MK-II) -changed to
    AAA2398
139282    TS.R.9    Spring -boot lid support rod -(boot, Twin Cam)
139282    TC.R.17   Spring -bonnet support rod -(bonnet fittings, Twin Cam)
140677    15.H.3    Plug for brake drum (large) (wire wheels only, rear axle)
140677    15.K.2    Plug for brake drum (large) (wire wheels only, front axle)
140677    16.H.3    Plug -brake drum (large) (2) -(rear, 1600 and 1600-MK-II)-wire wheels-
    changed to BHA4251
180079    15.C.1    Drain tube -(radiator, cooling system, 1500)
180079    16.C.1    Tube -drain -(radiator, cooling system, 1600) -changed to AAA3151
180260    15.R.40   License holder -(sundries, 1500 Tourer)
180260    16.R.43   License holder -(sundries, 1600 and 1600-MK-II Tourer) -changed to
    14A3823
180260    TC.R.54   License holder, Tourer -(sundries, Twin Cam) -changed to 14A8823
180603    15.P.1    Weight -wheel balance -1/2-oz   (A/R)
180603    TC.P.1    Weight -balance 1/2-oz (14.79 gm) (A/R) -(road wheels, Twin Cam-
    changed to 1B8036
180604    15.P.1    Weight -wheel balance -1-oz     (A/R)
180604    TC.P.1    Weight -balance 1-oz (28.35 gm) (A/R) -(road wheels, Twin Cam -changed
    to 1B8037
180605    15.P.1    Weight -wheel balance -1-1/2-oz (A/R)
180605    TC.P.1    Weight -balance 1-1/2-oz (42.52 gm) (A/R) -(road wheels, Twin Cam-
    changed to 1B8038
180606    15.P.1    Weight -wheel balance -2-oz (A/R)
180606    TC.P.1    Weight -balance 2-oz (56.70 gm) (A/R) -(road wheels, Twin Cam -changed
    to 1B8038
181756    15.S.1    Bag for tools -(tool kit, 1500)
181756    16.S.1    Bag -tool -(tool kit, 1600 and 1600-MK-II) -changed to AAA3447
181756    TC.S.1    Bag -tool -(tool kit, Twin Cam)
182143    15.R.40   Finisher for demister slot (2) -(sundries, 1500)
182143    16.R.43   Finisher -demist nozzle (2) -(sundries, 1600 and 1600-MK-II) -changed
    to AAA3406
182143    TC.R.54   Finisher -demist nozzle (2) -(sundries, Twin Cam)
183599    15.R.9    Screw in toeboard for carpet fixing (4) -(floor and tunnel, 1500)
183599    TC.R.8    Screw -carpet fixing toeboard (4) -(flooring, Coupe, Twin Cam)
184166    15.O.1    Bezel (chrome) (flasher warning light)
184166    16.R.42   Bezel -flasher warning light -(fascia panel, 1600 and 1600-MK-II)-
    changed to AAA3763
184166    TC.N.10   Bezel (chrome) -(flasher warning light, flasher-horn controls,
    electrical, Twin Cam)
184448    15.H.5    "U" clip for rear spring (4) (U-bolt)
184448    16.H.10  Clip -U -rear spring -(4) -(1600 and 1600-MK-II) -changed to AAA3838
184448    TC.H.5   U-clip -rear spring -(4) -(rear spring, Twin Cam)
185393    15.G.1    Bolt -shaft to flange (4/8) -(propshafts, 1500) -quantity increased
    Com.(C)61035-61504 (interspersed)
185393    16.G.1    Bolt -shaft to pinion flange (front and rear) (8) -(propshaft, 1600
    and 1600-MK-II) -changed to AAA4039
185393    TC.G.1    Bolt -propellor shaft flange (8) -(front + rear, propshaft, Twin Cam)
185705    16.M.1    Distance piece -pedal (2) -(brake controls, std.model, 1600 and
    1600-MK-II) -changed to AAA4130
185794    15.E.2    Bush -Pedal -(clutch pedal and linkage, 1500)
185794    15.M.1    Bush for pedal -(2 brake and clutch pedal)
185794    16.E.2    Bush (2) -(in clutch pedals, clutch controls,1600) -changed to AAA4129
185794    16.E.3    Bush -(clutch pedal, clutch controls, ARDB model 1600) -Com.(C)91240-
    changed to AAA4129
185794    16.M.2    Bush -(brake pedal, clutch controls, ARDB model 1600) -Com.(C)91240-
    changed to AAA4129
185794    TC.M.1    Bush -(brake pedal, brake controls, Twin Cam)
185795    15.M.1    Distance piece -pedal -(2 brake and clutch pedal)
185795    16.M.2    Distance piece -pedal (2) -(brake controls, ARDB model 1600 and
    1600-MK-II) -changed to AAA4130
185795    TC.M.1    Distance piece -pedal (2) -(brake controls, Twin Cam)
185798    15.M.1    Distance washer -pedal -(1 between brake and clutch pedals)
185798    16.M.1    Distance washer -pedal -(brake controls, std.model, 1600 and
    1600-MK-II) -changed to AAA4133
185925    15.N.9    Nut (2) -(wheelbox assembly, 1500)
185925    16.N.13   Nut (2) -(wheelbox assy, 1600 and 1600-MK-II) -changed to ANK3459
185925    TC.N.11   Nut (2) -(wheelbox assy, windscreen wiper,electrical, Twin Cam)
186890    15.S.1    Strap for tool bag -(tool kit, 1500)
186890    16.S.1    Strap -tool bag (2) -(tool kit, 1600 and 1600-MK-II) -changed to
    AAA4258
186890    TC.S.1    Strap -tool bag (2) -(tool kit, Twin Cam)
271601    15.R.17   Buffer for bonnet (10) -(bonnet lid fittings)
271601    16.R.18   Buffer -bonnet (10) -(bonnet fittings, 1600 and 1600-MK-II)-
    changed to AAA4598
271601    TC.R.17   Buffer -bonnet (10) -(bonnet fittings, Twin Cam)
300398    15.R.18   Washer -(copper seal at union at pump return -(heater, optional, 1500)-
    changed to AAA4657 for 1600 model
300398    16.R.46   Washer -(for union at pump return, heater, 1600 and 1600-MK-II)-
    changed to AAA4657
301020    15.H.4    Spring -brake shoe steady (4) -(Behive spring, rear brakes, 1500)
301020    16.H.4    Spring -shoe steady (2) -(rear brakes, standard model, 1600 and
    1600-MK-II) -changed to AAA4714
301140    15.R.43   Hose clip (6) -(heater, 1500)
301140    16.R.46   Hose clip (6) -(heater, 1600 and 1600-MK-II)
301140    TC.R.57   Hose clip (4) -(heater, heat and vent equip, Twin Cam)
301549    15.M.2    Plate for boot fixing -(master cylinder)
301549    16.M.3    Plate -boot fixing -(master cylinder, std.model 1600 and 1600-MK-II)-
    changed to AAA4756
301550    15.M.2    Joint for boot fixing plate -(master cylinder, 1500)
301550    16.M.3    Joint for boot fixing plate -(master cylinder, std.model 1600 and
    1600-MK-II) -changed to AAA4757
301551    15.M.2    Screw -plate -(2 master cylinder end plate)
301551    15.M.2    Screw -cover to body -(5 master cylinder)
301551    16.M.3    Screw -cover to body (5) -(master cylinder, std.model 1600 and
    1600-MK-II) -changed to AAA4758
500822    15.K.3    Rubber -check (2) -(front suspension, 1500)
500822    16.K.4    Rubber -check (2) -(front suspension, 1600 and 1600-MK-II std.model)-
    changed to AAA5023
500822    TC.K.3    Rubber -check (2) -(front suspension, Twin Cam)
500823    15.K.3    Distance piece for check rubber (2) -(front suspension, 1600 and
    1600-MK-II std.model) -changed to AAA5024
500823    TC.K.3    Distance piece for check rubber (2) -(front suspension, Twin Cam)
500946    15.R.19   Rubber washer for number-plate (4) -(rear number plate)
500946    16.R.19   Washer -number plate (rubber) (4) -(number plate, rear, 1600 and
    1600-MK-II) -changed to AAA5053
500946    TC.R.19   Washer -number plate (rubber) (4) -(rear, number plates and fittings,
    Twin Cam)
HomeBackTopNext
Thank you for your comments --Send e-mail to <Barney Gaylord>
© 2020-2022 Barney Gaylord --Copyright and reprint information