The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 8G
PART NO.  SPL.PAGE  DESCRIPTION                                                           
8G207     15.A.1    Stripped engine unit -new part no 8G210 Com.E)GB259
8G207     15.A.1    Stripped engine unit -new part no 48G165 Com.(E)GD101
8G210     15.A.1    Stripped engine unit -Com.(E)GB259 -(was 8G207) -change to 48G165
	Com.(E)GD101
8G283     16.H.2    Crown wheel and pinion 10/43 -(rear axle, 1600 and 1600-MK-II)-
    Fin.(C)100351 -Part number change, was ATB7156 and BTB323
8G500     15.F.1    Plug -blanking (2) -(low right side of gearbox, early and mid 1500)
8G500     16.F.4    Cap -control shaft boss (2) -(gearbox, 1600 and 1600-MK-II)
8G500     TC.F.1    Plug -blanking (2) -(gearbox assy, Twin Cam)
8G518     TC.A.16   Clip for hose -thermostat end (2) (water.pipes, Twin Cam)
8G536     16.B.3    Sleeve -HT cable -(ignition, 1600)
8G548     15.N.3    Bootee for terminal (starter switch) (2)
8G548     TC.N.3    Bootee for terminal (2) -(starter.switch, switches, Twin Cam)-
    correction changed to BCA4326
8G549     15.A.3    Tensioner ring for gear (camshaft) [Fin (E) GB258]
8G555     15.H.2    Seal -oil -(rear hub, rear axle, 1500)
8G555     16.H.4    Seal -oil -(rear hub, rear axle, 1600 and 1600-MK-II)
8G555     16.H.7    Seal -oil (2) -(hub, rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
8G555     TC.H.2    Seal -oil (2) -(hub, rear axle, Twin Cam)
8G612     15.A.6    Cap and cable for oil filler -(engine unit, 1500)
8G612     sup.7     Cap -oil filler (with cable) -(engine unit, sup)
8G612     16.A.27   Cap and cable -oil filler -(engine unit, 1622
8G619     15.A.9    Joint ring -container to head [Com(E)26661 except 26701-26993]
8G619     15.A.9    Joint ring-body to filter head [Com(E)26661 except 26701-26993]
8G619     15.A.9    Joint ring-filt hd to crankcase[Com(E)26661 except 26701-26993]
8G619     sup.10    Ring -joint -body to head and crankcase (2) -(oil filter,
    Tecalemit, engine unit, sup)
8G619     sup.10    Ring -joint -body to head and crankcase (2) -(oil filter,
    Purolator, engine unit, sup)
8G619     16.A.9    Joint ring -body to filter and crankcase (2) -(oil filter,
    Tecalemit, engine unit, 1600)
8G619     16.A.9    Joint ring -body to filter head and crankcase (2) -(oil filter,
    Purolator, engine unit, 1600)
8G619     16.A.30   Joint ring -body to filter and crankcase (2) -(oil filter,
    Tecalemit, engine unit, 1600)
8G619     16.A.30   Joint ring -body to filter and crankcase (2) -(oil filter,
    Purolator, engine unit, 1622)
8G619     TC.A.14   Seal -body to head -(oil.filter, engine, Twin Cam)
8G619     TC.A.14   Seal -head to crankcase -(oil.filter, engine, Twin Cam)
8G632     TC.A.16   Clip for hose (4) -(pipe, pump to elbow, water.pipes, Twin Cam)
8G632     TC.A.16   Clip for hose (2) -(thermostat outlet, water.pipes, Twin Cam)
8G632     TC.C.2    Clip for hose (2) -(tank to thermostat housing, cooling system,
    Twin Cam) -was 2H3705
8G662     15.A.11   Pump assy (reconditioned)(U.K. only)
8G683     15.A.9    Element for filter (oil) [Com(E)26661 except 26701-26993]
8G683     sup.10    Element -(oil filter, Tecalemit, engine unit, sup)
8G683     sup.10    Element -(oil filter, Purolator, engine unit, sup)
8G683     16.A.8    Element -(oil filter, Tecalemit, engine unit, 1600)
8G683     16.A.9    Element -(oil filter, Tecalemit, engine unit, 1600)
8G683     16.A.30   Element -(oil filter, Tecalemit, engine unit, 1622)
8G683     16.A.30   Element -(oil filter, Purolator, engine unit, 1622)
8G683     TC.A.14   Element -(oil.filter, engine, Twin Cam)
8G698     15.A.11   Seal -water pump [Fin(E)GB39864 except 39401-39525]
8G698     15.A.11   Seal -water pump [Com(E)GB39365 except 39401-39525]
8G698     16.A.11   Seal -water pump -(w.pump 1H1149, engine unit, 1600)
8G698     16.A.31   Seal -water pump -(w.pump 1H1149, engine unit, 1622) -changed to
    13H772
8G724     sup.11    Hub -pulley -(pump assy 12H839, water, engine unit, sup)
8G724     sup.11    Hub -pulley -(w.pump rep.kit, 12H839 pump, engine unit, sup)
8G724     16.A.11   Hub -pulley -(w.pump, 1H1149, engine unit, 1600) -(was 1H1154)
8G724     16.A.31   Hub -pulley -(w.pump, 1H1149, engine unit, 1622) -(was 1H1154)
8G742     16.A.31   Hub -pulley -(w.pump, 1H1149, engine unit, 1622) -(was 11G200)
8G855     TC.K.1    Seal -oil (2) -(front hub, front suspension, Twin Cam)
8G1057    15.A.15   Touring kit (spares for traveling) -Fin.(E)GB17060
8G1058    15.A.15   Touring kit (spares for traveling) -Com.(E)GB17061 -Fin.(E)GD7550-
    (was 8G1057)
8G1073    15.A.15   Touring kit (spares for traveling) -Com.(E)GD7551 -(was 8G1058)
8G2081    15.A.1    Main bearing (standard) (set)
8G2130    15.A.11   Repair kit -water pump [Fin(E)GB39864 except 39401-39525]
8G2137    15.A.3    Bearing for connecting rod (standard) (set) [Fin (E) GD6529]
8G2175     sup.3    Bearing -main -standard (1 set) -(crankshaft, engine unit, sup)
8G2175    16.A.3    Bearing -main -standard (1 set) -(crankshaft, engine unit, 1600)-
    changed to 8G2288 Com.(E)16GA/H21805
8G2175_10  sup.3    Bearing -main -.010" (.254mm) U/S (1 set) -(crankshaft, eng.unit, sup)
8G217510  16.A.3    Bearing -main -.010" (.254mm) U/S (1 set) -(crankshaft, eng.unit,
    1600) -changed to 8G228810 Com.(E)16GA/H21805
8G2175_20  sup.3    Bearing -main -.020" (.508mm) U/S (1 set) -(crankshaft, eng.unit, sup)
8G217520  16.A.3    Bearing -main -.020" (.508mm) U/S (1 set) -(crankshaft, eng.unit,
    1600) -changed to 8G228820 Com.(E)16GA/H21805
8G2175_30  sup.3    Bearing -main -.030" (.762mm) U/S (1 set) -(crankshaft, eng.unit, sup)
8G217530  16.A.3    Bearing -main -.030" (.762mm) U/S (1 set) -(crankshaft, eng.unit,
    1600) -changed to 8G228830 Com.(E)16GA/H21805
8G2175_40  sup.3    Bearing -main -.040" (1.016mm)U/S (1 set) -(crankshaft, eng.unit, sup)
8G217540  16.A.3    Bearing -main -.040" (1.016mm) U/S (1 set) -(crankshaft, eng.unit,
    1600) -changed to 8G228840 Com.(E)16GA/H21805
8G2176    15.A.1    Liner for camshaft bearing (set)
8G2176    sup.1     Liner -camshaft bearing (set) -(block assy, engine unit, sup)
8G2176    16.A.1    Liner -camshaft bearing (set) -(block assy, engine unit, 1600)
8G2176    16.A.21   Liner -camshaft bearing (set) -(block assy, engine unit, 1622)
8G2176    TC.A.1    Liner for half speed shaft (set) -(cyl.block assy, engine, Twin Cam)
8G2257    TC.A.5    Bearing -crankshaft main (standard) (set) -(crankshaft, Twin Cam)
8G2259    TC.A.6    Bearing for connecting rod -big end (standard) (set) -(crankshaft,
    Twin Cam)
8G2261    TC.A.8    Bearing for camshaft (set) -(camshaft, engine, Twin Cam)
8G2262    TC.A.19   Joint washer kit for engine decarburising -(engine.serv.kits, Twin
    Cam) -includes joints for cyl.head, water inlet elbow, cyl.head top.cover (inlet),
    cyl.head top.cover (exhaust), exhaust manifold, inlet manifold, carburetor (2) 
8G2262    TC.A.19   Joint washer kit supplementary -(engine.serv.kits, Twin Cam) -includes
    joints for timing cover, cyl.side cover (2), oil sump, cyl.blanking plate, drain tap
    washer, thermostat housing cover, tachometer housing, oil strainer, oil pump, scroll
    to water pump body, water inlet pipe, water pump, header tank filler neck, distributor
    drive housing, main bearing caps (2), eng.rear plate, eng.front plate, oil filter, oil
    feed pillar
8G2264    TC.A.19   Water pump repair kit (minor) -(engine.serv.kits, Twin Cam) -includes
    joints for scroll to body, washer for scroll plug (fibre), seal, washer felt, circlip
    for bearing, washer for spindle (felt), pump to timing case, circlip for spindle,
    inlet to water pump
8G2281    TC.A.18   Cooler kit -oil -(oil.cooler, engine, Twin Cam)
8G2282    16.A.35   Kit -oil cooler -(standard model, engine unit, 1622)
8G2282    ST.       Oil cooler kit -(special tuning)
8G2285    15.A.3    Bearing for connecting rod (standard) (set) [Com (E) GD6530]
8G2285     sup.3    Bearing -connecing rod -standard (1 set) -(con.rods, engine unit, sup)
8G2285_10  sup.3    Bearing -con.rod .010" (.254mm) U/S (1 set) -(con.rods, eng.unit, sup)
8G2285_20  sup.3    Bearing -con.rod .020" (.508mm) U/S (1 set) -(con.rods, eng.unit, sup)
8G2285_30  sup.3    Bearing -con.rod .030" (.760mm) U/S (1 set) -(con.rods, eng.unit, sup)
8G2285_40  sup.3    Bearing -con.rod .040" (1.016mm)U/S (1 set) -(con.rods, eng.unit, sup)
8G2285    16.A.3    Bearing -con.rod -big-end (std) (1 set) -(con.rods, eng.unit, 1600)
8G2285    16.A.24   Bearing -con.rod -big-end (std) (1 set) -(con.rods, eng.unit, 1622)
8G228510  16.A.3    Bearing -con.rod -big-end .010" (.254mm) U/S (1 set) -(eng.unit, 1600)
8G228510  16.A.24   Bearing -con.rod -big-end .010" (.254mm) U/S (1 set) -(eng.unit, 1622)
8G228520  16.A.3    Bearing -con.rod -big-end .020" (.508mm) U/S (1 set) -(eng.unit, 1600)
8G228520  16.A.24   Bearing -con.rod -big-end .020" (.508mm) U/S (1 set) -(eng.unit, 1622)
8G228530  16.A.3    Bearing -con.rod -big-end .030" (.762mm) U/S (1 set) -(eng.unit, 1600)
8G228530  16.A.23   Bearing -con.rod -big-end .030" (.762mm) U/S (1 set) -(eng.unit, 1622)
8G228540  16.A.3    Bearing -con.rod -big-end .040" (1.016mm)U/S (1 set) -(eng.unit, 1600)
8G228540  16.A.23   Bearing -con.rod -big-end .040" (1.016mm)U/S (1 set) -(eng.unit, 1622)
8G2288    16.A.3    Bearing -main -standard (1 set) -(crankshaft, engine unit, 1600)-
    Com.(E)16GA/H21805 -(was 8G2175)
8G228810  16.A.3    Bearing -main -.010" (.254mm) U/S (1 set) -(crankshaft, eng.unit,
    1600) -Com.(E)16GA/H21805 -(was 8G217510)
8G228820  16.A.3    Bearing -main -.020" (.508mm) U/S (1 set) -(crankshaft, eng.unit,
    1600) -Com.(E)16GA/H21805 -(was 8G217520)
8G228830  16.A.3    Bearing -main -.030" (.762mm) U/S (1 set) -(crankshaft, eng.unit,
    1600) -Com.(E)16GA/H21805 -(was 8G217530)
8G228840  16.A.3    Bearing -main -.040" (1.016mm)U/S (1 set) -(crankshaft, eng.unit,
    1600) -Com.(E)16GA/H21805 -(was 8G217540)
8G2304    TC.A.20   Water pump repair kit (major) -(engine.serv.kits, Twin Cam) -includes
    joints for washer for scroll plug (fibre), scroll to body, seal, washer (felt),
    circlip for bearing, washer for spindle (felt), pump to timing case, circlip for
    spindle, inlet pipe to water pump, vane, spindle, pin vane to spindle (taper), collar
    for spindle, bearing (2), tube bearing distance, key for pulley, nut for spindle,
    washer for spindle (lock)
8G2323    16.A.24    Bearing -main (standard) (1 set) -(crankshaft, engine unit, 1622)
8G232310  16.A.24    Bearing -main .010" (.254mm) u/s (1 set) -(engine unit, 1622)-
    changed to 8G233510
8G232320  16.A.24    Bearing -main .020" (.508mm) u/s (1 set) -(engine unit, 1622)
8G232330  16.A.24    Bearing -main .030" (.762mm) u/s (1 set) -(engine unit, 1622)-
    changed to 8G233530
8G232340  16.A.24    Bearing -main .040"(1.016mm) u/s (1 set) -(engine unit, 1622)-
    changed to 8G233540
8G2325    16.A.35   Kit -oil cooler -(all round disc brakes model, engine unit, 1622)-
    not available use component parts
8G233510  16.A.24    Bearing -main .010" (.254mm) u/s (1 set) -(engine unit, 1622)-
    was 8G232310
8G233530  16.A.24    Bearing -main .030" (.762mm) u/s (1 set) -(engine unit, 1622)-
    was 8G232330
8G233540  16.A.24    Bearing -main .040"(1.016mm) u/s (1 set) -(engine unit, 1622)-
    was 8G232340
8G2373    sup.11    Kit -water pump repair -(12839 pump, engine unit, sup)
8G2373    16.A.14   Kit -water pump repair -(12839 pump, engine unit, 1600)-includes
    vane, hub, bearing with spindle, wire -bearing locating, screw -lubricating point,
    washer screw (fibre), seal, joint -pump to crankcase
8G2373    16.A.34   Kit -water pump repair -(12839 pump, engine unit, 1622)-includes
    vane, hub, bearing with spindle, wire -bearing locating, screw -lubricating point,
    washer screw (fibre), seal, joint -pump to crankcase
8G2404    16.F.2    Needle roller -1st motion shaft (18) -(gearbox, 1600 and 1600-MK-II)-
    was 6K892
8G3000    15.G.1    Journal assembly with lubricator (propshaft #3 front) -
    Change to 8HG8183 Com.(C)61037-61504 (interspersed)
8G8025    15.H.4    Shoe assembly -brake (2 sets) (rear axle)
8G8025    15.K.2    Shoe assembly -brake (2 sets) (front axle -with drum brakes)
8G8183    15.G.1    Journal assembly with lubricator (2) (propshaft, 1500, #3) -
    Com.(C)61037-61504 (interspersed) -(was 8G3000)
8G8183    16.G.1    Journal assembly with lubricator (2) -(propshaft, 1600 and
    1600-MK-II) -Use 8G8979 for this application
8G8183    TC.G.1    Journal assembly (2) -(propshaft, Twin Cam)
8G8194   TC.K.2    Kit -caliper repair (4-sets) -(front axle, Twin Cam)  -includes Piston
    seal (4) and Dust seal (4)
8G8195   16.H.9    Kit -caliper repair (4-sets) -(rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240 -includes piston seal (4) and dust seal (4)
8G8195   TC.H.4    Kit -caliper repair (4-sets) -(rear axle, Twin Cam) -includes piston
    seal (4) and dust seal (4)
8G8196   TC.M.2    Service kit for master cylinder -(brake master cylinder, Twin Cam)-
    includes Piston seal, Dust excluder, Rubber seal and bush, Grease for rubber. -
    8G8196 not available use 8G8496
8G8197   16.H.9    Kit -friction pad replacement -handbrake (2-sets) -(rear axle, ARDB
    model 1600 and 1600-MK-II) -Com.(C)91240 -includes: pad -friction R/H inner and L/H
    outer (2), pad -friction R/H outer and L/H inner (2), rivet -bifurcated -short(4),
    rivet -bifurcated -long (4)
8G8197   TC.H.4    Kit -friction pad replacement (2-sets) -(handbrake, rear axle, Twin
    Cam) -includes: pad -friction R/H inner and L/H outer (2), pad -friction R/H outer
    and L/H inner (2), rivet-bifurcated -short(4), rivet -bifurcated -long (4) 
8G8215   ST.       Brake-shoe lined assembly (lined with Ferodo VG95/1 competition facings)
    -(special tuning) -(1500 only)
8G8219    16.E.4    Kit -clutch master cylinder repair -(clutch controls, AWDB model
    1600) -includes: Gasket filler cap, valve seal, plunger seal, dust cover, circlip,
    spring washer, taper end seal, grease tube.
8G8219    TC.E.1    Kit -clutch master cylinder repair -(master.cyl.assy, clutch, Twin
    Cam) -includes: plunger seal, valve seal, spring washer, taper end seal, dust cover,
    circlip, filler cap gasket
8G8224    16.M.3    Kit -master cylinder repair -(master cylinder, std.model 1600 and
    1600-MK-II) -contains: Piston cup (primary)(2), piston cup (secondary)(2), washer-
    primary cup to piston (2), push rod boot (2), valve cup, valve washer
8G8240    16.E.4    Kit -clutch operating cylinder repair -(clutch.op.cyl, clutch
    controls, ARDB model 1600) -includes: Seal, dust cover, circlip, bleed screw ball,
    bleed screw dust cap
8G8243    16.H.4    Kit -wheel cylinder repair (2) -(rear drum brakes, 1600 and
    1600-MK-II) -includes cup, seal, boot
8G8249    TC.E.2    Service kit for slave cylinder -(clutch, Twin Cam) -includes: seal,
    dust cover, bleed screw ball, bleed screw dustcap, circlip
8G8306    16.H.4    Brake -shoe assembly (2-sets) --(rear brakes, 1600 and 1600-MK-II)
8G8307    16.H.4    Liner with rivets (1-box) -(rear brakes, 1600 and 1600-MK-II)
8G8313    16.K.3    Kit -caliper repair (2) -(front brakes, 1600 & 1600-MK-II std.model)-
    changed to 8G8641 Com.(C)103261 wire wheels, 103834 disk wheels -includes seal wiper
    with retainer (4) and inner seal (4)
8G8314    16.K.3    Pad assembly (1-set) -(front brakes, 1600 and 1600-MK-II std.model)-
    changed to 8G8379 Com.(C)78106 -for 8G8314 use 8G8379 for all service replacements,
    see service memorandum MG290
8G8348    15.E.1    Lining and rivets (1 set) -(driven plate ass'y, clutch, 1500)
8G8348    16.E.1    Lining and rivets (1 set) -(driven plate ass'y, clutch, 1600)
8G8349    TC.A.5    Lining and rivets (1 set) -(clutch, Twin Cam)
8G8379    16.K.3    Pad assembly (1-set) -(front brakes, 1600 and 1600-MK-II std.model)-
    was 8G8314 Com.(C)78106 -for 8G8314 use 8G8379 for all service replacements,
    see service memorandum MG290
8G8420    16.E.2    Kit -clutch operating cylinder repair -(clutch, 1600) -was 17H7052-
    includes piston cup and boot
8G8452    TC.J.1    Socket -assembly -ball (2) -(tie rod end assy, steering, Twin Cam)-
    was ACH6168
8G8495    16.M.4    Kit -master cylinder repair -(brake, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240 -includes piston seal, dust excluder, static seal, tube grease.
8G8641    16.K.3    Kit -caliper repair (2) -(front brakes, 1600 & 1600-MK-II
    std.model) Com.(C)103261 wire wheels, 103834 disk wheels -was 8G8313 -includes seal
    wiper with retainer (4) and inner seal (4)
8G8496   TC.M.2    Service kit for master cylinder -(brake master cylinder, Twin Cam)-
    includes Piston, Valve, Spring suport rear end, Spring support front end, Main spring,
    Valve spring, Piston seal, Circlip, Static seal, Recuperating seal, Grease for rubber,
    Identification tag. -- This kit will convert BHA4071 to BHA4157 standard.
8G8903    16.H.8    Pad assembly -friction (1-set) -(calliper assy, rear axle, ARDB model
    1600 and 1600-MK-II) -Com.(C)92104 -alternate for 7H8201
8G8979    16.G.1    Journal assembly with lubricator (2) -(propshaft, 1600 and
    1600-MK-II) -was 8G8183
8G8982    16.J.2    Socket assembly -ball (2) -(Tie rod end ass'y, steering, 1600 and
    1600-MK-II) -changed to ACH6168
8G9037    TC.R.56   Heater kit assembly -(heating and ventilation equipment, Twin Cam)
8G9038    TC.R.57   Fresh air kit assembly -(fresh air ventilation equipment, Twin Cam)
8G9116    TC.R.49   Tonneau cover assembly (Black) RHD optional -(tonneau cover, Tourer,
    Twin Cam) Fin.(C)993 -was AKE1756
8G9117    TC.R.49   Tonneau cover assembly (Ice Blue) RHD optional -(tonneau cover, Tourer,
    Twin Cam) Fin.(C)993 -was AKE1757
8G9118    TC.R.49   Tonneau cover assembly (Black) LHD optional -(tonneau cover, Tourer,
    Twin Cam) Fin.(C)993 -was AKE1758
8G9119    TC.R.49   Tonneau cover assembly (Ice Blue) LHD optional -(tonneau cover, Tourer,
    Twin Cam) Fin.(C)993 -was AKE1759
8G9120   TC.R.49   Tonneau cover assembly (Black) RHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)994 -was AFH6572
8G9121   TC.R.49   Tonneau cover assembly (Ice Blue) RHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)994 -was AFH6574
8G9122   TC.R.49   Tonneau cover assembly (Black) LHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)994 -was AFH6571
8G9123   TC.R.49   Tonneau cover assembly (Ice Blue) LHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)994 -was AFH6573
8G9124   TC.R.49   Tonneau cover assembly (Grey) RHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)2193 -was AFH5975
8G9125   TC.R.49   Tonneau cover assembly (Beige) RHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)2193 -was AFH5971
8G9126   TC.R.49   Tonneau cover assembly (Blue) RHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)2193 -was AFH5973
8G9127   TC.R.49   Tonneau cover assembly (Grey) LHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)2193 -was AFH5976
8G9128   TC.R.49   Tonneau cover assembly (Beige) LHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)2193 -was AFH5972
8G9129   TC.R.49   Tonneau cover assembly (Blue) LHD optional -(tonneau cover, Tourer,
    Twin Cam) Com.(C)2193 -was AFH5974
8G9124    16.R.38   Tonneau cover assembly -Grey RHD optional -(hood and tonneau cover,
    1600 and 1600-MK-II Tourer) -was AHH5975
8G9125    16.R.38   Tonneau cover assembly -Beige RHD optional -(hood and tonneau cover,
    1600 and 1600-MK-II Tourer) -was AHH5971
8G9126    16.R.38   Tonneau cover assembly -Blue RHD optional -(hood and tonneau cover,
    1600 and 1600-MK-II Tourer) -was AHH5973
8G9127    16.R.38   Tonneau cover assembly -Grey LHD optional -(hood and tonneau cover,
    1600 and 1600-MK-II Tourer) -was AHH5976
8G9128    16.R.38   Tonneau cover assembly -Beige LHD optional -(hood and tonneau cover,
    1600 and 1600-MK-II Tourer) -was AHH5973
8G9129    16.R.38   Tonneau cover assembly -Blue LHD optional -(hood and tonneau cover,
    1600 and 1600-MK-II Tourer) -was AHH5974
8G208110  15.A.13   Bearing set -main -.010 U/S -Fin (E) GB3510
8G208120  15.A.13   Bearing set -main -.020 U/S -Fin (E) GB3510
8G208130  15.A.13   Bearing set -main -.030 U/S -Fin (E) GB3510
8G208140  15.A.13   Bearing set -main -.040 U/S -Fin (E) GB3510
8G213710  15.A.13   Bearing set -connecting rod -.010 U/S -Fin (E) GB3510
8G213720  15.A.13   Bearing set -connecting rod -.020 U/S -Fin (E) GB3510
8G213730  15.A.13   Bearing set -connecting rod -.030 U/S -Fin (E) GB3510
8G213740  15.A.13   Bearing set -connecting rod -.040 U/S -Fin (E) GB3510
8G217510  15.A.13   Bearing set -main -.010 U/S -Com (E) GB3511
8G217520  15.A.13   Bearing set -main -.020 U/S -Com (E) GB3511
8G217530  15.A.13   Bearing set -main -.030 U/S -Com (E) GB3511
8G217540  15.A.13   Bearing set -main -.040 U/S -Com (E) GB3511
8G228510  15.A.13   Bearing set -connecting rod -.010 U/S -Com (E) GB3511
8G228520  15.A.13   Bearing set -connecting rod -.020 U/S -Com (E) GB3511
8G228530  15.A.13   Bearing set -connecting rod -.030 U/S -Com (E) GB3511
8G228540  15.A.13   Bearing set -connecting rod -.040 U/S -Com (E) GB3511
HomeBackTopNext
Thank you for your comments --Send e-mail to <Barney Gaylord>
© 2020 Barney Gaylord --Copyright and reprint information