The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 2K
PART NO.  SPL.PAGE  DESCRIPTION                                                           
2K1356    15.F.1    Plug for gearbox extension (taper) -(gearbox assy, 1500)
2K1356    16.F.1    Plug -taper -rear extension (2) -(gearbox assy, 1600 and 1600-MK-II)
2K1356    TC.F.1    Plug -extension (taper) -(gearbox assy, Twin Cam)
2K3975    15.R.15   Nut for pivot bolt -(vent, frame and ventilator ass'y, 1500 Coupe)-
    (correction was LNZ204)
2K3975    16.R.16   Nut -bolt -(pivot, vent assy, windows, door, 1600 and 1600-MK-II
    Coupe) -(correction was LNZ204) -1/4-26-BSF hex nut (not 1/4-28-UNF)
2K3975    TC.R.16   Nut for bolt -(vent pivot, ventilator assy, windows, Coupe, Twin Cam)-
    (correction was LNZ204) -1/4-26-BSF hex nut (not 1/4-28-UNF)
2K4608    15.A.1    Plug -rear main bearing cap [Fin (E) GB40104]
2K4608    15.A.1    Plug -redundant dipper rod boss -(engine unit, 1500)
2K4608    15.A.5    Plug -valve rocker shaft (screwed) -(engine head, 1500)
2K4608    sup.1     Plug -oil dipper rod boss -(engine unit, sup)
2K4608    sup.6     Plug -screwed -shaft -(valve rocker, cyl.head, engine unit, sup)
2K4608    16.A.1    Plug -oil dipper rod boss -(engine unit, 1600)
2K4608    16.A.5    Plug -valve rocker (screwed) -(cyl.head, engine unit, 1600)
2K4608    16.A.26   Plug -valve rocker (screwed) -(cyl.head, engine unit, 1622)
2K4909    15.F.2    Spring for ball (1st 2nd shift shaft)
2K4909    15.F.2    Spring for ball (3rd-4th shift shaft)
2K4909    15.F.2    Spring for ball (reverse shift shaft)
2K4909    15.F.5    Spring for reverse plunger detent (remote control tower)
2K4909    16.O.1    Washer -oil pipe to oil gauge (leather) -(oil gauge, instruments, 1600
    and 1600-MK-II)
2K4909    TC.F.2    Spring - ball -(1st-2nd shaft, gearbox assy, Twin Cam) -correction
    changed to 22A75
2K4909    TC.F.2    Spring - ball -(3rd-4th, gearbox assy, Twin Cam) -correction changed
    to 22A75
2K4909    TC.F.2    Spring - ball -(reverse, gearbox assy, Twin Cam) -correction changed
    to 22A75
2K4909    TC.F.6    Spring -reverse plunger detent -(gearbox, Twin Cam) -changed to 22A75
2K4936    TC.O.2    Washer, oil pipe to oil gauge (leather) -(instruments, Twin Cam)
2K4954    15.A.7    Washer for drain tap (side of block, engine unit, 1500)- (alt 2K4975)
2K4954    sup.8     Washer -drain tap -(side of block, engine unit, sup)- (alt 2K4975)
2K4954    16.A.2    Washer -drain tap -(side of block, engine unit, 1600)- (alt 2K4975)
2K4954    16.A.21   Washer -drain tap -(side of block, engine unit, 1622)- (alt 2K4975)
2K4954    TC.A.1    Washer for tap -(water drain, cyl.block assy, engine, Twin Cam)-
    alternative 2K4975
2K4958    15.A.1    Washer for screw (fibre), (side cover) -Com.(G)A916
2K4958    15.A.11   Washer for pump (water) [Fin(E)GB39864 except 39401-39525]
2K4958    15.F.1    Washer for side cover (fibre) (1 only) -Com.(G)A916 -(gearbox, 1500)
2K4958    sup.8     Washer -screw (2) -(side cover, engine unit, sup)
2K4958    16.A.7    Washer -plain -screw (2) -(side covers, engine unit, 1600)
2K4958    16.A.28   Washer -plain -screw (2) -(side covers, engine unit, 1622)
2K4958    16.F.1    Washer -fibre -screw -(GB side cover, GB assy, 1600 and
    1600-MK-II)
2K4958    TC.F.1    Washer for screw (fibre) -(side cover, gearbox assy, Twin Cam)
2K4971    15.F.1    Joint washer -blanking plug -(low right side gearbox early/mid 1500)
2K4971    16.F.4    Joint washer -cap (2) -(control shaft boss, gearbox, 1600 and
    1600-MK-II)
2K4971    TC.F.1    Joint washer -blanking plug (2) -(gearbox assy, Twin Cam)
2K4974    15.A.11   Washer for screw lube port (w-pump)[Com(E)GB39365ex39401-39525]
2K4974    sup.11    Washer -screw (fibre) -(pump assy 12H839, water, engine unit, sup)
2K4974    sup.11    Washer -screw (fibre) -(w.pump rep.kit, 12H839 pump, engine unit, sup)
2K4974    16.A.11   Washer -screw (fibre) -(w.pump, 1H1149, engine unit, 1600)
2K4974    16.A.31   Washer -screw (fibre) -(w.pump, 1H1149, engine unit, 1600)
2K4975    15.A.7    Washer for drain tap (side of block) -(alt 2K4954)
2K4975    TC.A.1    Washer for tap -(water drain, cyl.block assy, engine, Twin Cam)-
    alternative 2K4954 
2K4975    sup.8     Washer -drain tap -(side of block, engine unit, sup) -(alt 2K4954)
2K4975    16.A.2    Washer -drain tap -(side of block, engine unit, 1600) -(alt 2K4954)
2K4975    16.A.21   Washer -drain tap -(side of block, engine unit, 1622) -(alt 2K4954)
2K4982    15.A.9    Washer for cap nut -fibre (2) -(pressure relief, engine unit, 1500)
2K4982    sup.9     Washer -cap nut (2) -(fibre, oil release, engine unit, sup)
2K4982    16.A.29   Washer -cap nut (2) -(oil release, engine unit, 1622)
2K4982    TC.A.13   Washer for cap nut (2) -(oil release, oil.pump, engine, Twin Cam)
2K4983    sup.1     Washer -plug -(block assy, engine unit, sup)
2K4991    TC.A.11   Plug for oil gallery -screwed -(chwvga, cyl.head, engine, Twin Cam)
2K4992    15.A.1    Plug -transverse oil hole (screwed)
2K4992    16.A.1    Plug -oil hole (screwed) -(engine unit, 1600)
2K4992    TC.A.1    Plug for oil hole (screwed) -(cyl.block assy, engine, Twin Cam)
2K4993    sup.1     Plug - screwed - oil hole -(engine unit, sup)
2K4993    16.A.21   Plug - oil hole (screwed) -(cyl.block, engine unit, 1622)
2K5163    15.A.10   Nipple (pipe assy) [Com(E)26661 except 26701-26993]
2K5163    sup.10    Nipple -pipe -(pipe assy, filter to crankcase, engine unit, sup)
2K5163    16.A.10   Nipple -pipe -(pipe assy, filter to crankcase, engine unit, 1600)
2K5163    16.A.30   Nipple -pipe -(pipe assy, filter to crankcase, engine unit, 1622)
2K5163    TC.A.18   Nipple -(oil pipe, gauge to cooler, oil.cooler, engine, Twin Cam)
2K5164    15.A.10   Nut (pipe assy) [Com(E)26661 except 26701-26993]
2K5164    sup.10    Nut -nipple -(pipe assy, filter to crankcase, engine unit, sup)
2K5164    16.A.10   Nut -nipple -(pipe assy, filter to crankcase, engine unit, 1600)
2K5164    16.A.30   Nut -nipple -(pipe assy, filter to crankcase, engine unit, 1622)
2K5164    TC.A.18   Nut -(oil pipe, gauge to cooler, oil.cooler, engine, Twin Cam)
2K5197    15.A.7    Washer for screw (plain) -front cover (5) -(engine unit, 1500)
2K5197    sup.8     Washer -screw (2) -(front cover to bearing cap, engine unit, sup)
2K5197    16.A.7    Washer -plain -screw (4) -(front cover to mtg plate, engine unit,1600)
2K5197    16.A.7    Washer -plain -screw (2) -(front cover to bearing cap, eng.unit, 1600)
2K5197    16.A.28   Washer -plain -screw (3) -(front cover to front.plate, eng.unit, 1622)
2K5197    16.A.28   Washer -plain -screw (2) -(front cover to bearing cap, eng.unit, 1622)
2K5211    sup.7     Gasket -plug (copper) (4) -(sparking plugs, engine unit, sup)-
    alternate 11G145 (copper)
2K5211    16.A.6    Gasket -plug (4) -(sparking plugs, engine unit, 1600)-
    changed to 88G219
2K5211    16.A.27   Gasket for plug (4) -(sparking plugs, engine unit, 1622)-
    changed to 88G219
2K5319    15.A.3    Washer for clamping screw (spring) (5/16 gudgeon pin)
2K5319    15.A.6    Washer for stud (spring) (5/16 rocker brackets)
2K5319    15.A.7    Washer for screw (spring) (5/16 dynamo mounting)
2K5319    15.A.7    Washer for screw (spring) (5/16 mounting plate to crankcase)
2K5319    15.A.8    Washer for stud -oil pump to crankcase (spring)
2K5319    15.A.11   Washer for screw (spring) (water pump)
2K5319    15.A.12   Washer for screw (spring) (5/16 dynamo link fixed end)
2K5319    15.A.12   Washer for screw (spring) (5/16 dynamo rear bracket bolt to crankcase)
2K5319    15.A.12   Washer for screw (spring) (5/16 dynamo to rear bracket)
2K5319    15.A.12   Washer for screw (spring) (5/16 dynamo to water pump)
2K5319    15.E.1    Washer for screw (spring) (6) - (clutch to flywheel, 1500)
2K5319    15.F.1    Washer for front cover stud (spring, 7) -change to LWZ305 Com.(G)A916
2K5319    15.F.1    Washer for side cover screw (spring, 7) - Fin.(G)A915 -
    Change to LWZ305 (6) Com.(G)A916
2K5319    15.F.2    Washer for set screw (spring) (rear lever, remote control shaft)-
    (gearbox, 1500) -changed to LWZ305 Com.(G)A916
2K5319    15.F.5    Washer for bolts (spring) (4) (remote control tower)
2K5319    16.A.2    Washer -spring -screw (3)(mtg.plate to crankcase) -changed to LWN305-
    2K5319 not available use LWN305
2K5319    16.A.3    Washer -spring -screw (4) (small end con.rod) -changed to LWN305-
    2K5319 not available use LWN305
2K5319    16.A.11   Washer -spring -screw (4) -(w-pump to crankcase, engine unit 1600-
    changed to LWN305
2K5319    16.A.11   Washer -spring -screw (2) -(dynamo bracket crankcase, eng.unit 1600-
    changed to LWN305
2K5319    16.A.12   Washer -spring -screw -(dynamo, engine unit 1600 -changed to LWN305
2K5319    16.A.12   Washer -spring -bolt -(dynamo to mounting bracket, engine unit 1600-
    changed to LWN305
2K5319    16.A.12   Washer -spring -bolt -(dynamo to water pump, engine unit 1600-
    changed to LWN305
2K5319    16.A.23   Washer -spring -screw -(eng.mtg.plate, engine unit, 1622)-
    changed to LWN305
2K5319    16.A.24   Washer -spring -screw (4) -(con.rod small.end, engine unit, 1622)-
    changed to LWN305
2K5319    16.A.26   Washer -spring -rocker bracket stud(4) -(cyl.head, engine unit,1622)-
    changed to LWN305
2K5319    16.A.29   Washer -spring -stud (3) -(oil pump, engine unit,1622)-
    changed to LWN305
2K5319    16.A.31   Washer -spring -screw(4) -(w-pump to crankcase (long, eng.unit, 1622)-
     changed to LWN305
2K5319    16.A.31   Washer -spring -for screw (2) -(dynamo to crankcase, engine unit,1622)
2K5319    16.A.32   Washer -spring -screw -(adjusting link to dynamo, engine unit, 1622)-
    changed to LWN305
2K5319    16.A.32   Washer -spring -screw -(dynamo to mounting brkt, engine unit, 1622)-
    changed to LWN305
2K5319    16.A.32   Washer -spring -bolt -(dynamo to water pump, engine unit, 1622)-
    changed to LWN305
2K5319    16.F.4    Washer -spring -screw -(rear selector lever, remote.ctrl, gearbox,
    1600 and 1600-MK-II)
2K5319    16.F.5    Washer -spring -for bolt (4) -(tower, gearbox, 1600 and 1600-MK-II)-
    change to LWN305
2K5319    TC.A.1    Washer for stud (spring) (3) -(oil pump, cyl.block assy, engine, Twin
    Cam)
2K5319    TC.A.5    Washer for screw (spring) (6) -(clutch to flywheel, clutch, Twin Cam)
2K5319    TC.A.17   Washer for screw (spring) -(link to dyndmo, dist+dynamo mountings,
    engine, Twin Cam) Fin.(E)111 except 103, 106, 109 -for all replacements use ZCS0509
    with 2A110 PW205 and 51K1712
2K5319    TC.F.2    Washer for screw (spring) -(rear lever, gearbox, Twin Cam)
2K5319    TC.F.6    Washer for bolt (spring) (2) -(remote tower, gearbox, Twin Cam)
2K5380    15.F.1    Plug -drain (gearbox) - Com.(E)GD101 (late 1500) -(was 6K499) -
                     -Believe this to be a typo in the 1500 SPL - should be 2K5830
2K5830    16.F.1    Plug -drain -(GB casing assy, GB assy, 1600 and 1600-MK-II)
2K5863    15.F.4    Washer for locknut (spring) (clutch release arm bolt)
2K5896    15.A.11   Washer for hub (spring) (w-pump) [Fin(E)GB39864ex39401-39525]
2K6192    15.B.2    Nipple -carburetor end -(vacuum pipe, 1500) -Fin.(E)GB11300
2K6193    15.B.2    Tube nut -carburetor end -changed to 2A459 Com.(E)GB11301 -(vacuum,
    igniton, 1500)
2K6337    TC.A.17   Washer for screw -(dist.locating, dist+dynamo mountings, engine, Twin
    Cam)
2K6534    15.F.5    Plug for reverse plunger (remote control tower, gearbox, 1500)
2K6534    16.F.4    Plug -reverse plunger -(remote tower, gearbox, 1600 and 1600-MK-II)
2K6534    TC.F.6    Plug -reverse plunger -(remote tower, gearbox, Twin Cam)
2K6544    16.H.1    Bearing -differential (2) -(rear axle, 1600 and 1600-MK-II) -not
    available use 2K8938
2K6544    16.H.5    Bearing -differential (2) -(rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240 -alternative 2K8938
2K6544    TC.F.1    Bearing -differential (2) -(rear axle, Twin Cam) -alternative 2K8938
2K6633    15.A.3    Washer for crankshaft gear (packing)
2K6633    sup.4     Washer -packing -gear (A/R) -(crankshaft, engine unit, sup)
2K6633    16.A.4    Washer -packing (A/R) -(crankshaft gear, engine unit, 1600)
2K6633    16.A.25   Washer -packing (A/R) -(crankshaft gear, engine unit, 1622)
2K6804    15.A.5    Washer for rocker shaft (plain) (2) -(cyl.head, engine unit, 1500)
2K6804    sup.6     Washer -rocker shaft (2) -(plain, cyl.head, engine unit, sup)
2K6804    16.A.5    Washer -rocker shaft (2) -(plain, cyl.head, engine unit, 1600)
2K6804    16.A.26   Washer -rocker shaft (2) -(plain, cyl.head, engine unit, 1622)
2K7131    TC.E.1    Washer (shakeproof) -(hose, master.cyl.assy, clutch, Twin Cam-
    correction changed to LWN606
2K7140    15.A.7    Ring -crankcase front cover (felt) -(engine unit, 1500)
2K7140    sup.8     Ring -(felt) -(crankcase front cover, engine unit, sup)
2K7140    16.A.7    Ring -crankcase front cover (felt) -(engine unit, 1600)
2K7140    16.A.14   Ring -crankcase front cover (felt) -(engine unit, 1600)
2K7140    16.A.28   Ring -crankcase front cover (felt) -(eng.unit, 1622)-Fin.(E)16GC/8262-
    changed to 2A939 Com.(E)16GC/8263
2K7140    16.A.34   Ring -crankcase front cover (felt) -(eng.unit, 1622)
2K7420    15.F.3    Wire for selector locking (1st-2nd selector)
2K7420    15.F.3    Wire for selector locking (3rd-4th selector)
2K7420    15.F.3    Wire for selector locking (reverse selector)
2K7420    TC.F.2    Wire -selector locking (1st-2nd, gearbox, Twin Cam)
2K7420    TC.F.3    Wire -selector locking (3rd-4th, gearbox, Twin Cam)
2K7420    TC.F.3    Wire -selector locking (reverse, gearbox, Twin Cam)
2K7435    15.H.1    Washer -packing -for bearing .004" (.102mm)(A/R) differential, rear
    axle, 1500)
2K7435    16.H.1    Washer -bearing packing .004" (.102mm)(A/R) differential, rear axle,
    1600 and 1600-MK-II)
2K7435    16.H.5    Washer -bearing packing .004" (.102mm)(A/R) -(differential, rear
    axle, ARDB model 1600 and 1600-MK-II) -Com.(C)91240
2K7440    15.A.7    Washer for Screw -cover to crankcase (4)
2K7440    sup.8     Washer -plain -screw (4) -(front cover to crankcase, engine unit, sup)
2K7440    16.A.7    Washer -plain -screw (4) -(front cover to crankcase, engine unit,1600)
2K7440    16.A.28   Washer -plain -screw (4) -(front cover to crankcase, engine unit,1622)
2K7477    15.H.2    Bearing for rear hub (2) -(rear axle, 1500)
2K7477    16.H.4    Bearing -hub (2) -(rear axle, 1600 and 1600-MK-II)
2K7477    16.H.7    Bearing -hub (2) -(rear axle, ARDB model 1600 and 1600-MK-II)-
    Com.(C)91240
2K7477    TC.H.2    Bearing for hub (2) -(rear axle, Twin Cam)
2K7498    TC.A.16   Washer for plug -(thermostat housing, water.pipes, engine, Twin Cam)-
    not required when heater is not fitted
2K7564    sup.1     Plug -screwed -oil gallery boss -(block assy,engine unit,sup)
2K7993    15.H.1    Washer -packing -for bearing .002" (.051mm)(A/R) -(differential, rear
    axle, 1500)
2K7993    16.H.1    Washer -bearing packing .002" (.051mm)(A/R) -(differential, rear axle,
    1600 and 1600-MK-II)
2K7993    16.H.5    Washer -bearing packing .002" (.051mm)(A/R) -(differential, rear axle,
    ARDB model 1600 and 1600-MK-II) -Com.(C)91240
2K7993    TC.F.1    Washer -bearing packing .002" (.051mm)(A/R) -(differential, rear axle,
    Twin Cam)
2K7993    TC.F.1    Washer -bearing packing .004" (.101mm)(A/R) -(differential, rear axle,
    Twin Cam)
2K8158    15.F.1    Welch plug -7/8" diameter -(superseded by ACA4010) -(engine unit,1500)
2K8158    16.F.1    Plug -casing -welch (7/8" dia.) (2) -(GB casing assy, GB assy, 1600)-
    Fin.(E)16GA/U/H31660
2K8158    TC.F.1    Plug -welch (7/8" dia.) -(gbx.casing, gearbox assy, Twin Cam)
2K8159    16.A.15   Plug - inlet manifold (Welch) (2) -(engine unit, 1600)
2K8160    15.H.3    Plug for hub extension (welch) (wire wheels only)(2) -(rear axle,
    1500)
2K8160    16.H.2    Plug -welch -hub extension (wire wheels only)(2) -(rear axle, 1600 and
    1600-MK-II)
2K8160    16.H.7    Plug -welch -(hub extension)(2) -(rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240
2K8160    TC.H.2    Plug -welch -(hub extension)(2) -(rear axle, Twin Cam)
2K8168    TC.A.21   Plug for core hole (2) -(inlet manifold, engine, Twin Cam)
2K8169    15.A.1    Plug -welch (large) (engine block)
2K8169    16.A.1    Plug (welch) (4) -(cylinder block assy, engine 1600)
2K8169    sup.1     Plug -welch (large) (4) -(engine unit, sup)
2K8169    16.A.21   Plug -welch (4) -(cyl.block, engine unit, 1622)
2K8450    15.A.11   Washer -felt (w-pump)[Fin(E)GB39864 except 39401-39525]
2K8568    15.A.6    Bush for cover (rubber) (2) -(valve cover, engine unit, 1500)
2K8568    sup.7     Bush -cover (rubber) (2) -valve cover, engine unit, sup)
2K8568    16.A.6    Bush -cover (rubber) (2) -(valve cover, engine unit, 1600)
2K8568    16.A.27   Bush -cover (rubber) (2) -(valve cover, engine unit, 1622)
2K8623    15.A.1    Plug -crankcase oil gallery -(cylinder block assy, engine 1500)
2K8623    16.A.1    Plug -crankcase oil gallery (3) -(cylinder block assy, engine 1600)
2K8623    16.A.21   Plug -oil gallery (3) -(cyl.block, engine unit, 1622)-
    Fin.(E)16GC/2326 except 2157 to 2225
2K8623    TC.A.1    Plug for oil Gallery (3) -(cyl.block assy, engine, Twin Cam)
2K8645    15.N.1    Terminal screw for battery (4)
2K8645    16.N.1    Screw -terminal (2) -(battery, 1600 and 1600-MK-II)
2K8645    TC.N.1    Screw -terminal (2) -(battery, electrical, Twin Cam)
2K8686    15.E.2    Locknut for hose -(slave hose to frame, clutch, 1500)
2K8686    15.M.3    Locknut for hose -(at battery box)
2K8686    15.M.3    Locknut for hose -(at RH wheel drum brakes)
2K8686    15.M.3    Locknut for hose -(at LF wheel drum brakes)
2K8686    16.E.2    Locknut hose -(at clutch hose on chassis, clutch controls, 1600)
2K8686    16..5    Locknut -hose -(rear, hyd.pipes+fittings, std.model 1600 and
    1600-MK-II)
2K8686    16.M.6    Locknut -hose -(rear, hyd.pipes+fittings, ARDB model 1600 and
    1600-MK-II) Com.(C)91240
2K8686    TC.M.2    Locknut -hose -(rear, hyd.pipes+fittings, Twin Cam)
2K8938    15.H.1    Bearing -differential (2) -(rear axle, 1500)
2K8938    16.H.1    Bearing -differential (2) -(rear axle, 1600 and 1600-MK-II)
2K8938    16.H.5    Bearing -differential (2) -(rear axle, ARDB model 1600 and
    1600-MK-II) -Com.(C)91240 -alternative 2K6544
2K8938    TC.F.1    Bearing -differential (2) -(rear axle, Twin Cam) -alternative 2K6544
2K8960    15.F.3    Spring for peg -(thrust washer front 3rd gear, gearbox, 1500)
2K8960    16.F.3    Spring -peg -(thrust washer front 3rd gear, gearbox, 1600 and
    1600-MK-II)
2K8960    TC.F.3    Spring -peg -(thrust washer front, 3rd gear, gearbox, Twin Cam)
2K8982    TC.A.16   plug for pipe -(water.inlet, water.pipes, engine, Twin Cam) -not
    required when heater is fitted
2K9932    15.A.12   Washer for adjusting link to dynamo mounting pillar (heavy flat)
2K9932    16.A.12   Washer for adjusting link to dynamo mounting pillar (heavy flat)-
    changed to PWN106
2K9932    16.A.32   Washer -plain -nut -(dynamo adj.link, engine unit, 1622)-
    changed to PWN106
HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2020-2024 Barney Gaylord -- Copyright and reprint information