The MGA With An Attitude
MGAguru.com MGAguru.com
MGA Part Numbers - 2A
PART NO.  SPL.PAGE  DESCRIPTION                                                           
2A29      sup.7     Washer -joint -elbow -(water outlet, engine unit, sup)
2A110     TC.A.17   Washer for setscrew -(link to dynamo, dist+dynamo mountings, engine,
    Twin Cam) Com.(E)112 also 103, 106, 109
2A128     15.A.12   Pillar -dynamo mounting -(engine unit, 1500)
2A128     sup.11    Pillar -dynamo adjusting link -(engine unit, sup)
2A128     16.A.11   Pillar -dynamo adjusting link -(engine unit, 1600)
2A128     16.A.31   Pillar -dynamo adjusting link -(engine unit, 1622)
2A139     15.A.4    Spindle -distributor drive -(engine unit, 1500) -(alt 2A847)
2A139     16.A.11   Spindle -distributor driving -(engine unit, 1600) -(alternate 2A847)
2A139     16.A.25   Spindle -distributor driving -(engine unit, 1622) -(alternate 2A847)-
    new number 1G2062
2A150     15.A.6    Nut for rocker cover (cap) (2) -(engine unit, 1500)
2A150     sup.7     Nut -cap -rocker cover (2) -(engine unit, sup)
2A150     16.A.27   Nut -cover (cap) (2) -(rocker.cover, engine unit, 1622)
2A258     15.A.5    Screw for rocker shaft (locating) (8) -(engine unit, 1500)
2A258     sup.6     Screw -locating -rocker shaft -(cyl.head, engine unit, sup)
2A258     16.A.5    Screw -rocker shaft (locating) -(cyl.head, engine unit, 1600)
2A258     16.A.26   Screw -rocker shaft (locating) -(cyl.head, engine unit, 1622)
2A259     15.A.5    Plate -screw locking (rocker shaft) -(cyl.head, engine unit, 1500)
2A259     sup.6     Plate -locking -screw -(rocker shaft, cyl.head, engine unit, sup)
2A259     16.A.26   Plate -locking screw (lock) -(rocker shaft, cyl.head, eng.unit, 1600)
2A259     16.A.26   Plate -locking screw (lock) -(rocker shaft, cyl.head, eng.unit, 1622)
2A329     sup.7     Bracket -engine sling (2) (UK only) -(engine unit, sup)
2A329     16.A.27   Bracket -engine sling (2) -(engine unit, 1622)
2A380     16.A.30   Plug -drain -(oil reservoir, engine, 1622) -changed to 88G257
2A412     15.A.12   Pulley for dynamo -changed to 1H998 Com.(E)GB17061 -(dynamo mtg, 1500)
2A457     15.A.11   Bearing -ball (water pump) [Fin(E)GB39864ex39401-39525]
2A459     15.B.2    Tube nut -carburetor end -(ignition 1500) Com.(E)GB11301 -(was 2K6193)
2A459     TC.A.9    Nut for olive -(pipe assembly -oil feed, adjuster, chain, camshaft,
    engine, Twin Cam)
2A459     TC.B.2    Nut carburetor end -(ign.ctrl.pipe, vac.control, ignition, Twin Cam)
    Fin.(E)2222 -no longer required see service memorandum MG/301
2A495     15.B.3    Nut -carburetor end -(ign.ctrl.pipe, vacuum control, 1600)
2A497     15.A.12   Link for dynamo -adjusting -(engine unit, 1500)
2A497     15.A.12   Link for dynamo -adjusting -(engine unit, 1500)
2A497     16.A.12   Link -dynamo adjusting -(eng.unit, 1600) -2A497 not available use 12H67
2A497     16.A.32   Link -dynamo adjusting -(eng.unit, 1622) -changed to 12H67
2A552     15.A.7    Cover -front (with oil catcher and felt) -changed to 11G93 Com.(E)GB259
2A758     15.A.12   Bracket -dynamo (rear) -(engine unit, 1500)
2A758     16.A.31   Bracket -dynamo (rear) -(engine unit, 1622) -changed to 12A526
2A759     15.A.3    Washer for nut (lock) (cam sprocket)
2A759     sup.3     Washer -locking -nut -(camshaft, engine unit, sup)
2A759     16.A.3    Washer -lock -nut -(camshaft, engine unit, 1600)
2A759     16.A.24   Washer -lock -nut -(camshaft, engine unit, 1622)
2A770     15.A.7    Cover -cylinder side -(engine unit, 1500) -(Com (E) GB35809)-
    (was 1A2198)
2A770     16.A.7    Cover -cylinder -side -rear -(engine unit, 1600) -changed to 12H152
    or 12H941 (Com.(E)16GA/H25740)
2A770     TC.A.7    Cover for cylinder side (front) -(engine, Twin Cam)
2A778     15.A.11   Wire for bearing (locating)(w-pump)[Com(E)GB39365 ex3940-39525]
2A778     sup.11    Wire -bearing locating -(pump assy 12H839, water, engine unit, sup)
2A778     sup.11    Wire -bearing locating -(w.pump rep.kit, 12H839 pump, engine unit, sup)
2A778     16.A.11   Wire -bearing locating -(w.pump, 1H1149 pump, engine unit, 1600)
2A778     16.A.31   Wire -bearing locating -(w.pump, 1H1149 pump, engine unit, 1622)
2A847     15.A.4    Spindle -distributor drive -(engine unit, 1500) - (alt 2A139)
2A847     16.A.11   Spindle -distributor driving -(engine unit, 1600) -(alternate 2A139)-
    new number 1G2062
2A847     16.A.25   Spindle -distributor driving -(engine unit, 1622) -(alternate 2A139)-
    new number 1G2062
2A3141    15.F.2    Screw -fork locating (1st-2nd speed shift fork, gearbox, 1500)
2A3141    15.F.2    Screw -fork locating (3rd-4th speed shift fork, gearbox, 1500)
2A3141    15.F.2    Screw -fork locating (reverse shift fork, gearbox, 1500)
2A3141    16.F.2    Screw -reverse fork locating -(gearbox, 1600 and 1600-MK-II)
2A3141    16.F.2    Screw -fork locating (1st-2nd gear) -(gearbox, 1600 and 1600-MK-II)
2A3141    16.F.2    Screw -fork locating (3rd-4th gear) -(gearbox, 1600 and 1600-MK-II)
2A3141    TC.F.2    Screw -fork locating (1st-2nd speed) -(gearbox, Twin Cam)
2A3141    TC.F.2    Screw -fork locating (3rd-4th speed) -(gearbox, Twin Cam)
2A3141    TC.F.2    Screw -fork locating (reverse) -(gearbox, Twin Cam)
2A3254    15.F.3    Oil seal for pinion (speedometer driven gear shaft) -(gearbox, 1500)
2A3254    16.F.2    Seal -oil -speedometer pinion -(gearbox, 1600 and 1600-MK-II)
2A3254    16.F.3    Oil -seal -pinion -(speedo.drive, gearbox, Twin Cam)
2A3255    15.F.3    Ring for oil seal retaining (speedometer driven gear, gearbox, 1500)
2A3255    16.F.2    Ring -oil seal retaining -(speedo pinion, gearbox, 1600 and
    1600-MK-II)
2A3255    TC.F.3    Ring -oil seal retaining -(speedo pinion, gearbox, Twin Cam)
2A3256    15.F.3    Bush for pinion (speedometer driven gear shaft) -(gearbox, 1500)
2A3256    16.F.2    Bush -speedometer pinion -(gearbox, 1600 and 1600-MK-II)
2A3256    TC.F.3    Bush -speedometer pinion -(gearbox, Twin Cam)
2A5176    16.H.10   Bush -shackle plate (rubber)(8) -(rear spring, 1600 and 1600-MK-II)-
    was AHH5016
2A7213    15.H.1    Bearing for bevel pinion -front (differential)
2A7213    16.H.2    Bearing -pinion -outer -(rear axle, 1600 and 1600-MK-II)
2A7213    16.H.6    Bearing -pinion -outer -(rear axle, ARDB model, 1600 and 1600-MK-II)-
    Com.(C)91240
2A7213    TC.H.2    Bearing -pinion -outer -(rear axle, Twin Cam)
2A7226    15.H.1    Bolts -differential carrier (10) -(rear axle, 1500)
2A7226    16.H.1    Stud -gear carrier (10) -(rear axle, 1600 and 1600-MK-II)
2A7226    16.H.5    Stud -gear carrier (10) -(rear axle, ARDB model, 1600 and 1600-MK-II)
    -Com.(C)91240
2A7226    TC.H.1    Stud for gear carrier (10) -(rear axle, Twin Cam)
2A9013    16.N.10   Lamp -rear flasher (amber) (2) -(road lamps, 1600) Fin.(C)100351
2A9013    TC.N.8    Lamp -rear flasher (amber) (2) -(road lamps, Twin Cam) Com.(C)2193
2A9040    16.N.10   Lamp -rear flasher (red) (2) -(road lamps, 1600) -Fin.(C)100351
2A9040    TC.N.8    Lamp -flasher (rear) (red LHD) (2) -(tail, road lamps, Twin Cam)-
    Com.(C)2193
HomeBackTopNext
Thank you for your comments --Send e-mail to <Barney Gaylord>
© 2020, 2024 Barney Gaylord --Copyright and reprint information