The MGA With An Attitude
MGAguru.com MGAguru.com
LOCKTAB for Reverse Gear Shaft Locking Screw - GT-131

For a long time the locktab (item 132 below) for reverse gear shaft locking screw has been "Not Available". Suggestions range from using a 1/4-inch internal tooth lock washer to thread lock adhesive.
reverse parts
Now we have a solution. Grab a 2-hole locktab for the engine timing chain tensioner, and cut it in half to make two functional locktabs for the reverse shaft bolt.

1B3363 -- Locktab for screw (reverse shaft locking screw)
    (No Longer Available).

AEC340 -- Locktab for timing chain tensioner
    Moss Motors 460-570 or AEC340
    Cut it in half to make two substitute 1B3363.

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2024 Barney Gaylord -- Copyright and reprint information