The MGA With An Attitude
MGAguru.com MGAguru.com
VITALONI Overtaking Mirror Bracket - AT-103G

Screw on overtaking mirror bracket On 9/22/2009, DEStiebel@aol.com wrote:
"I used 1-3/4 inch aluminum strip from Home Depot. Bent two 90 degree angles. Used the top screw from the hand grab and the second screw from the windscreen frame. You only need 1/4" longer screws. I purchased a pair of Vitaloni mirrors. Pictures attached. Total cost minus mirrors $5.00".
Screw on overtaking mirror bracket Screw on overtaking mirror bracket

HomeBackTopNext
Thank you for your comments -- Send e-mail to <Barney Gaylord>
© 2009 Barney Gaylord -- Copyright and reprint information